Model: GCWN4950D2WS

The GE Connector Model Select - Part# WH12X10095 is a connector model designed for use with General Electric (GE) washing machines. It is a universal part that can be used to replace the original connector on any GE washer. The connector is made of durable plastic and features two male and two fem...

GE CONTROL ASM - Part# WH12X10614 is a control assembly for General Electric washing machines. It is used to control the various functions of the washing machine, such as water level, temperature, spin speed, and cycle selection. The part number is specific to certain models of GE washing machines...

GE Counterweight Part# WH01X10643 is a counterweight used in some GE washing machines. It is a metal weight that is attached to the back of the washer drum. The counterweight helps to balance the load during the spin cycle, reducing vibration and noise. It also helps to keep the washer from moving...

GE Coupling Pulsator Part# WH43X10037 is a part used in washing machines to connect the transmission shaft to the agitator. It is made of plastic and rubber and is designed to allow the agitator to move up and down while the transmission shaft remains stationary. The coupling pulsator helps to red...

GE Dispenser Asm FS - Part# WH43X10039 is a part for General Electric washing machines. It is the dispenser assembly for fabric softener and bleach. This part includes the housing, the cup, and the lid. The housing holds the cup and lid in place and provides a seal to keep the contents of the cup ...

GE Drain Hose Asm - Part# WH41X10285 is a replacement part for GE washing machines. It is a flexible drain hose that connects the washing machine to the drain pipe. The hose is made of durable plastic and is designed to fit most GE washers. It measures approximately 8 feet in length and has an inn...

The GE Funnel Shower Head Assembly - Part# WH41X10299 is a replacement part for a variety of GE washing machines. It is a plastic funnel-shaped shower head that attaches to the water inlet valve of the washing machine. The shower head helps to evenly distribute water throughout the wash cycle, ens...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Clothes Washer Washing Machine Water Drain Pump Assembly - Part# WH23X10043 is a replacement part for washing machines. It is designed to pump water out of the machine during the spin cycle. The pump assembly includes a motor, impeller, and hou...

The GE General Electric Hotpoint PartsIPS Kenmore Clothes Washer Washing Machine Tub Dampening Strap - Part# WH1X2727 is a part used in washing machines to reduce the vibration and noise caused by the spinning of the tub. It is made of a flexible rubber material and attaches to the inner tub of th...

The GE General Electric Hotpoint PartsIPS Kenmore Washing Machine Clothes Washer Water Level Pressure Switch Hose - Part# WH41X365 is a replacement part for washing machines. It is a hose that connects the water level pressure switch to the water inlet valve. The pressure switch senses the water l...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Washer Washing Machine TUB SEAL GASKET - Part# WH02X10383 is a replacement part for washing machines. It is a rubber gasket that seals the outer tub of the washing machine to the inner tub. This seal prevents water from leaking out of t...

GE KNOB ASM - Part# WH01X10650 is a replacement part for General Electric washing machines. It is a control knob assembly that fits onto the control panel of the washing machine. The knob assembly includes the knob, shaft, and mounting hardware. This part is used to control the various settings on...

GE Motor & Inverter ASM - Part# WH20X20229 is a motor and inverter assembly manufactured by General Electric. It is used in washing machines to control the speed of the motor and the direction of rotation. The motor and inverter assembly consists of a motor, an inverter, a capacitor, and other com...

GE Probe Sensor ATC (Part# WH12X10410) is a temperature control device used in many GE washing machines. It is a thermistor-type temperature sensor that measures the temperature of the water in the washer. The probe senses the water temperature and sends a signal to the washer's main control board...

The GE ROD & SPRING ASSEMBLY - Part# WH16X10158 is a replacement part for GE washing machines. It is a rod and spring assembly that helps to keep the lid of the washing machine closed during operation. The rod and spring assembly consists of a metal rod, two springs, and two plastic clips. The met...

The GE ROD & SPRING ASSEMBLY - Part# WH16X10159 is a replacement part for washing machines. It is a rod and spring assembly that helps to support the agitator in the washer. The rod and spring assembly helps to keep the agitator in place while the washer is running. The rod and spring assembly als...

GE SWITCH PRESSURE - Part# WH12X10412 is a pressure switch used in GE washing machines. It is a two-terminal switch that senses the water level in the washer tub and turns off the water supply when the desired level is reached. The switch is designed to prevent overfilling of the washer tub and to...

GE Trans/Agit Shifter Part# WH38X10019 is a part used in GE washing machines. It is a transmission and agitator shifter assembly that helps to shift the agitator from one speed to another. The part includes the shifter, the drive block, and the drive shaft. The shifter is responsible for controlli...

GE TUB ASM - Part# WH45X20473 is a replacement part for General Electric washing machines. It is the assembly that holds the tub and agitator in place. This part includes the tub, agitator, mounting hardware, and seals. It is designed to fit select General Electric washing machines and replaces pa...

GE Valve Triple Water (Part# WH13X10037) is a replacement part for GE washing machines. It is a three-way valve that controls the flow of water into the washer. It has three ports: one for hot water, one for cold water, and one for the drain hose. The valve is designed to regulate the amount of wa...

The GE Washer Bolt Combo - Part# WH02X22434 is a combination of two washer bolts and two nuts. This combo is designed to secure the outer tub to the cabinet of a GE washing machine. The two bolts are made of metal and measure 1/4 inch in diameter and 1-1/2 inches in length. The two nuts are also m...

GE Washer Thrust Part# WH02X10283 is a replacement part for GE washing machines. It is a thrust bearing that helps to reduce friction between the washer tub and the drive shaft. This part helps to keep the washer running smoothly and efficiently. The thrust bearing is made of durable plastic and m...