Model: GCG21IEMHFWW

GE Auger Part# WR17X11263 is a replacement part for GE Ice Makers. It is a plastic auger that helps to move the ice cubes from the ice bin to the dispenser chute. The auger is made of durable plastic and measures approximately 8 inches in length and 1 inch in diameter. It has a flat end that fits ...

GE CAM CLOSURE Part# WR02X10637 is a replacement part for GE refrigerators. It is a plastic cam closure that is used to secure the refrigerator door to the refrigerator frame. The cam closure has two parts: a cam and a base. The cam is inserted into the base and then the base is attached to the re...

GE CAM CLOSURE Part# WR02X10638 is a replacement part for a variety of GE refrigerator models. It is a plastic cam closure that helps to secure the refrigerator door in place. The cam closure is designed to fit into the door frame and latch onto the door itself, providing a secure seal that preven...

GE Clip Grille Bisque (Part# WR02X10738) is a replacement part for GE refrigerators. It is a plastic grille that is used to cover the air vent on the refrigerator. The grille helps to keep dust and debris from entering the refrigerator and also helps to keep the air circulating properly. The grill...

GE Cover Pan Glass - Part# WR32X10200 is a replacement part for a variety of GE refrigerator models. It is a glass cover pan that fits over the evaporator fan motor in the back of the refrigerator. This part helps to protect the fan motor from dust and debris, and also helps to keep the refrigerat...

GE Grommet and Tube Assembly (Part# WR17X11168) is a genuine OEM part used in refrigerators to provide a water connection from the refrigerator to the water supply line. This assembly includes a grommet, tube, and mounting bracket. The grommet is made of rubber and is designed to provide a tight s...

GE Handle SXS (Part# WR12X10332) is a replacement handle for GE side-by-side refrigerators. It is made of durable plastic and comes in a white finish. The handle measures approximately 11 inches long and 1.5 inches wide. It has two mounting holes on the back for easy installation. This handle is d...

GE Harness Motor & Sol Part# WR23X10330 is a replacement part for GE refrigerators. It is a motor and solenoid assembly that controls the defrost cycle of the refrigerator. The motor and solenoid assembly are connected to the defrost timer, which is located in the control panel of the refrigerator...

GE Heater & Bracket Assy - Part# WR51X10042 is a replacement part for GE refrigerators. It is a complete assembly that includes the heater, bracket, and wiring harness. The heater is used to defrost the evaporator coils in the refrigerator to prevent ice buildup. The bracket holds the heater in pl...

GE HRNS/THERMFF - Part# WR23X10209 is a replacement refrigerator defrost thermostat for General Electric (GE) refrigerators. This thermostat is used to regulate the temperature of the refrigerator and prevent it from becoming too cold or too hot. It is designed to shut off the compressor when the ...

GE Humidity Control - Part# WR02X10821 is a humidity control for refrigerators. It is designed to help maintain the optimal humidity level in the refrigerator, which helps keep food fresher for longer. The control works by sensing the humidity level in the refrigerator and then adjusting the tempe...

GE LEVER ASM FZ - Part# WR11X10008 is a replacement part for GE refrigerators. It is a lever assembly that is used to open and close the freezer door. The part number WR11X10008 is specific to certain models of GE refrigerators. This lever assembly includes the handle, lever, and mounting bracket....

GE NUT J - Part# WR01X10190 is a part manufactured by General Electric (GE). It is a plastic nut used to secure the door handle on some GE refrigerators. The nut is made of durable plastic and has a diameter of 1/4 inch. It has an internal thread that fits onto the door handle and is secured with ...

GE Shelf Fixed Fz - Part# WR71X10527 is a replacement shelf for GE refrigerators. It is a fixed shelf that is designed to fit into the interior of the refrigerator and provide additional storage space. The shelf is made of durable plastic and features a white finish. It measures approximately 16 i...

GE SHIELD LIGHT FZ - Part# WR17X11480 is a replacement part for GE refrigerator models. It is a light shield that fits over the light bulb in the refrigerator. The shield helps to protect the bulb from dust and other debris, as well as providing a more even distribution of light throughout the ref...

GE SLIDE AND BRAA02 - Part# WR72X10140 is a replacement part for GE refrigerators. It is a slide and bracket assembly that is used to secure the refrigerator door to the refrigerator cabinet. The slide and bracket assembly includes two metal slides, two plastic brackets, and four screws. The slide...

GE Thimble Door (Part# WR01X10206) is a replacement part for a range or oven. It is used to secure the oven door in place and provide a tight seal. The thimble door is made of metal and has a spring-loaded design that allows it to be easily installed and removed. It fits most GE ranges and ovens, ...

Hinge Top & Pin FF (Part# WR13X10215) is a part used in many refrigerator models. It is a two-piece assembly consisting of a hinge top and pin. The hinge top is made of plastic and attaches to the top of the refrigerator door. The pin is made of metal and fits into the hinge top, allowing the door...