Model: GCE23LGYDFNB

GE Auger Part# WR17X11263 is a replacement part for GE Ice Makers. It is a plastic auger that helps to move the ice cubes from the ice bin to the dispenser chute. The auger is made of durable plastic and measures approximately 8 inches in length and 1 inch in diameter. It has a flat end that fits ...

The GE Bottom Bracket Evap (Part# WR17X12635) is a part used in refrigerators to help circulate air around the refrigerator. It is located at the bottom of the refrigerator and helps to keep the air circulating throughout the unit. The evaporation helps to keep the temperature inside the refrigera...

The GE Clear Insert Door Module - Part# WR71X10761 is a replacement part for GE refrigerators. It is a clear plastic insert that fits into the door of the refrigerator and helps to keep the temperature inside the refrigerator consistent. The insert helps to reduce cold air loss when the door is op...

GE Cover Motor Back - Part# WR17X12323 is a replacement part for GE refrigerators. It is the back cover of the motor assembly and is used to protect the motor from dust and debris. The part is made of plastic and is black in color. It measures approximately 8 inches by 6 inches and has two mountin...

GE Cover Pan Glass - Part# WR32X10200 is a replacement part for a variety of GE refrigerator models. It is a glass cover pan that fits over the evaporator fan motor in the back of the refrigerator. This part helps to protect the fan motor from dust and debris, and also helps to keep the refrigerat...

The GE Cup Fill Im - Part# WR29X10109 is a replacement part for GE refrigerators. It is a cup-shaped plastic part that fits into the back of the refrigerator and helps to fill the ice maker with water. The part is designed to fit into the back of most GE refrigerators and can be used to replace an...

The GE Door Shelf Module (Part# WR71X10973) is a replacement part for GE refrigerators. It is a plastic shelf that attaches to the inside of the refrigerator door and provides additional storage space for items such as condiments, sauces, and other small items. The shelf is adjustable and can be m...

GE Duct Asm Ff Transition - Part# WR02X13091 is a part manufactured by General Electric (GE) for use in ducted air conditioning systems. It is a transition piece that connects two different sized ducts together, allowing air to flow from one to the other. The part number WR02X13091 indicates that ...

GE GASKET PAN CVR FRONT - Part# WR14X10169 is a replacement part for a General Electric refrigerator. It is a gasket that fits around the front of the refrigerator's drip pan, which is located at the bottom of the refrigerator. The gasket helps to keep moisture and dirt out of the drip pan, and al...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Evaporator Fan Motor - Part# WR60X10307 is a replacement part for refrigerators. It is designed to circulate air throughout the refrigerator and freezer compartments, helping to maintain a consistent temperature. The motor is locat...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator DOOR STOP - Part# WR02X13425 is a replacement part for refrigerators. It is used to stop the refrigerator door from opening too far and potentially damaging the interior of the refrigerator. The door stop is made of plastic and has two...

GE Grille Recess BK - Part# WR17X11655 is a replacement part for GE refrigerator models. It is a black grille recess that fits into the front of the refrigerator to cover the air vent. The grille recess helps to keep the air flow in and out of the refrigerator consistent, while also providing a de...

GE Handle (Part# WR12X10626) is a replacement handle for GE refrigerators. It is made of durable plastic and is designed to fit a variety of GE refrigerator models. The handle has a white finish and features a textured grip for easy handling. It also includes two screws for installation. This hand...

GE Harness Ff Lt - Part# WR23X10493 is a harness assembly for a General Electric refrigerator. It is used to connect the refrigerator's main control board to the evaporator fan motor. The harness includes two connectors, one for the control board and one for the fan motor. The harness also include...

GE Heater & Bracket Assy - Part# WR51X10042 is a replacement part for GE refrigerators. It is a complete assembly that includes the heater, bracket, and wiring harness. The heater is used to defrost the evaporator coils in the refrigerator to prevent ice buildup. The bracket holds the heater in pl...

The GE Module Shelf - Part# WR71X10297 is a replacement part for a variety of GE refrigerators. It is a white plastic shelf that fits into the refrigerator door and provides additional storage space. The shelf is designed to fit into the existing shelf brackets and can be easily removed for cleani...

The GE Module Shelf FF - Part# WR71X10979 is a replacement part for a variety of GE refrigerators. It is a plastic shelf that fits into the freezer section of the refrigerator and provides additional storage space. The shelf has two adjustable dividers that can be used to organize items within the...

GE PADDLE ICE DISP BK - Part# WR17X12125 is a replacement part for GE ice dispensers. It is a black paddle that is used to dispense ice from the ice dispenser. The part number WR17X12125 is specific to certain models of GE refrigerators and freezers. This part helps to ensure that the ice dispense...

GE Scr 12-24 Tt Hx 7/8 S - Part# WR01X10792 is a replacement part for a GE refrigerator. It is a defrost heater assembly that is used to keep the evaporator coils from freezing up in the refrigerator. The part number WR01X10792 is the manufacturer's part number for this specific defrost heater ass...

GE SCR 8-18 DG TRT20 5/8 S - Part# WR01X10621 is a part number for a GE refrigerator start relay. This start relay is used to control the compressor motor in the refrigerator. It is an 8-pin single-phase relay with a 20A rating and 5/8" spade terminals. The relay is designed to be used with GE ref...

GE SEAL SIDES CHILL - Part# WR14X10159 is a replacement part for GE refrigerators. It is a white plastic part that seals the sides of the refrigerator to keep cold air in and warm air out. The part helps to maintain the temperature inside the refrigerator and keep food fresh. It also helps to redu...

GE Shield Light FF (Part# WR17X12200) is a refrigerator light shield designed to protect the light bulb in the refrigerator from being damaged. It is made of a durable plastic material and is designed to fit most GE refrigerators. The shield has two clips that attach to the sides of the refrigerat...

GE SHIELD LIGHT FZ - Part# WR17X11480 is a replacement part for GE refrigerator models. It is a light shield that fits over the light bulb in the refrigerator. The shield helps to protect the bulb from dust and other debris, as well as providing a more even distribution of light throughout the ref...

The GE SLIDE AND BRACKET ASM R - Part# WR72X10194 is a part used in refrigerators. It is a slide and bracket assembly that helps to support the refrigerator door. The assembly includes two brackets, one for the top of the door and one for the bottom, as well as two slides that attach to the door a...

The GE Spring Deflector Int. - Part# WR02X11768 is a part used in refrigerators to help keep the refrigerator door from slamming shut. It is a spring-loaded device that attaches to the top of the refrigerator door and helps to absorb the shock of closing the door. The spring deflector works by all...

GE Spring Torsion - Part# WR02X12256 is a replacement part for GE refrigerators. It is a spring torsion that helps to keep the refrigerator door closed. The spring torsion is made of metal and has a black finish. It measures approximately 2 inches in length and 1 inch in width. This part is used t...

GE Stripper IM is a part number WR29X10083 that is used in GE refrigerator ice makers. It is a plastic strip that helps to push the ice cubes out of the ice maker and into the storage bin. The strip is made of durable plastic and is designed to last for many years. It has a curved shape that fits ...

GE Support shelf - Part# WR02X12187 is a part used in some GE refrigerators. It is a plastic shelf support that helps to hold the shelves in place. The shelf support is designed to fit into the side walls of the refrigerator and is secured with two screws. This part helps to keep the shelves from ...

The GE Thermostat Defrost Control (Part# WR50X10065) is a replacement part for refrigerators and freezers. It is used to control the defrost cycle of the appliance. The thermostat works by sensing the temperature inside the refrigerator or freezer and turning on the defrost cycle when it reaches a...

GE Thimble Door - Part# WR01X10953 is a replacement part for a range of GE ovens. It is a metal door that fits over the opening of the oven and seals it shut. The thimble door helps to keep heat and smoke from escaping the oven while cooking. It also helps to keep food from spilling out of the ove...

GE Thimble Door - Part# WR01X10956 is a replacement part for GE brand dryers. It is a metal door that fits into the front of the dryer and provides access to the interior of the machine. The thimble door is used to access the lint filter, drum, and other components inside the dryer. It is made of ...

The GE Water Valve - Part# WR57X10065 is a water valve designed for use in General Electric refrigerators. It is a two-way valve that controls the flow of water from the refrigerator's water supply line to the ice maker and water dispenser. The valve has two ports, one for the incoming cold water ...

Hinge Top & Pin FF (Part# WR13X10215) is a part used in many refrigerator models. It is a two-piece assembly consisting of a hinge top and pin. The hinge top is made of plastic and attaches to the top of the refrigerator door. The pin is made of metal and fits into the hinge top, allowing the door...