Model: GCE23LGTBFWW

GE Auger Part# WR17X11263 is a replacement part for GE Ice Makers. It is a plastic auger that helps to move the ice cubes from the ice bin to the dispenser chute. The auger is made of durable plastic and measures approximately 8 inches in length and 1 inch in diameter. It has a flat end that fits ...

The GE Auger Motor boot, Part# WR02X11767, is a replacement part for the auger motor in some GE refrigerators. It is a black rubber boot that fits over the auger motor and helps to keep dust and debris out of the motor. The boot also helps to reduce noise from the motor. This part is used in some ...

GE CAM CLOSURE Part# WR02X10637 is a replacement part for GE refrigerators. It is a plastic cam closure that is used to secure the refrigerator door to the refrigerator frame. The cam closure has two parts: a cam and a base. The cam is inserted into the base and then the base is attached to the re...

GE CAM CLOSURE Part# WR02X10638 is a replacement part for a variety of GE refrigerator models. It is a plastic cam closure that helps to secure the refrigerator door in place. The cam closure is designed to fit into the door frame and latch onto the door itself, providing a secure seal that preven...

GE CAP HANDLE WW - Part# WR12X10816 is a replacement part for a refrigerator handle. It is made of white plastic and is designed to fit General Electric (GE) brand refrigerators. The handle measures approximately 4 inches wide and 1 inch deep. It has two mounting holes on the back for easy install...

GE CLAMP TUBE - Part# WR02X12265 is a part used in many GE refrigerators. It is a plastic tube clamp that is used to secure the water line to the refrigerator. The clamp helps to keep the water line from vibrating and coming loose. It also helps to prevent leaks and other damage that can occur whe...

GE Cover Pan Glass - Part# WR32X10200 is a replacement part for a variety of GE refrigerator models. It is a glass cover pan that fits over the evaporator fan motor in the back of the refrigerator. This part helps to protect the fan motor from dust and debris, and also helps to keep the refrigerat...

GE DIVERTER OVERFLOW - Part# WR17X11449 is a part used in GE refrigerators. It is a diverter overflow tube that helps to divert water from the refrigerator's main water line to the ice maker. The diverter overflow tube is connected to the main water line and then runs down into the ice maker. This...

GE GASKET DOOR FF WH - Part# WR24X10155 is a replacement part for a refrigerator door. It is a white gasket that fits around the edge of the refrigerator door to provide an airtight seal. This helps to keep cold air in and warm air out, ensuring that food stays fresh and cold. The gasket is made o...

The GE GASKET DOOR FZ WH - Part# WR24X10156 is a replacement part for a refrigerator. It is a white gasket that fits around the door of the refrigerator to provide an airtight seal. This helps to keep the cold air inside the refrigerator and prevent warm air from entering. The gasket is made of du...

GE GASKET PAN CVR FRONT - Part# WR14X10169 is a replacement part for a General Electric refrigerator. It is a gasket that fits around the front of the refrigerator's drip pan, which is located at the bottom of the refrigerator. The gasket helps to keep moisture and dirt out of the drip pan, and al...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Grommet - Part# WR02X12008 is a replacement part for refrigerators. It is a rubber grommet that fits around the evaporator fan motor in the refrigerator. The grommet helps to reduce vibration and noise from the fan m...

GE Grille Recess WH - Part# WR17X11654 is a replacement grille for a GE refrigerator. It is designed to fit into the recess of the refrigerator door and provide an aesthetically pleasing look. The grille is made of white plastic and measures approximately 17 inches wide by 11 inches high. It has t...

GE Handle (Part# WR12X10626) is a replacement handle for GE refrigerators. It is made of durable plastic and is designed to fit a variety of GE refrigerator models. The handle has a white finish and features a textured grip for easy handling. It also includes two screws for installation. This hand...

GE Harness Ac Fz Intermediate - Part# WR23X10487 is a replacement part for GE refrigerators. It is an electrical harness that connects the main control board to the compressor, condenser fan motor, and evaporator fan motor. This part is used to replace a damaged or faulty harness in order to resto...

GE Harness Ff Lt - Part# WR23X10493 is a harness assembly for a General Electric refrigerator. It is used to connect the refrigerator's main control board to the evaporator fan motor. The harness includes two connectors, one for the control board and one for the fan motor. The harness also include...

GE Harness Motor & Sol Part# WR23X10330 is a replacement part for GE refrigerators. It is a motor and solenoid assembly that controls the defrost cycle of the refrigerator. The motor and solenoid assembly are connected to the defrost timer, which is located in the control panel of the refrigerator...

GE Heater & Bracket Assy - Part# WR51X10042 is a replacement part for GE refrigerators. It is a complete assembly that includes the heater, bracket, and wiring harness. The heater is used to defrost the evaporator coils in the refrigerator to prevent ice buildup. The bracket holds the heater in pl...

GE LEVER ASM FZ - Part# WR11X10008 is a replacement part for GE refrigerators. It is a lever assembly that is used to open and close the freezer door. The part number WR11X10008 is specific to certain models of GE refrigerators. This lever assembly includes the handle, lever, and mounting bracket....

The GE Module Shelf - Part# WR71X10297 is a replacement part for a variety of GE refrigerators. It is a white plastic shelf that fits into the refrigerator door and provides additional storage space. The shelf is designed to fit into the existing shelf brackets and can be easily removed for cleani...

The GE Orifice Fan Assy - Part# WR17X10812 is a replacement part for GE refrigerators. It is a fan assembly that helps to circulate air within the refrigerator. The fan is located in the back of the refrigerator and helps to move cold air from the evaporator coils to the freezer and fresh food com...

The GE Pin Hinge Btm Adj Hollow - Part# WR02X12263 is a replacement part for General Electric (GE) refrigerators. It is a pin hinge bottom adjustment hollow part that is used to adjust the bottom of the refrigerator door. This part is made of plastic and metal and measures approximately 1-1/2 inch...

GE Scr8-18 AB UFL 1 1/2 SS - Part# WR01X10568 is a stainless steel, 1-1/2 inch Universal Flange (UFL) screw from General Electric (GE). It is part of the GE Scr8-18 AB series, which is a line of screws designed for use in various applications. The UFL design allows for easy installation and remova...

GE SCREW - Part# WR01X10631 is a replacement part for General Electric (GE) appliances. It is a screw used to secure the door handle to the door on some GE refrigerators. The screw is made of metal and has a Phillips head. It measures approximately 1/2 inch in length and has a diameter of #8-32. T...

GE SEAL SIDES CHILL - Part# WR14X10159 is a replacement part for GE refrigerators. It is a white plastic part that seals the sides of the refrigerator to keep cold air in and warm air out. The part helps to maintain the temperature inside the refrigerator and keep food fresh. It also helps to redu...

GE Shelf Fixed Fz - Part# WR71X10527 is a replacement shelf for GE refrigerators. It is a fixed shelf that is designed to fit into the interior of the refrigerator and provide additional storage space. The shelf is made of durable plastic and features a white finish. It measures approximately 16 i...

GE Shield Light FF (Part# WR17X12200) is a refrigerator light shield designed to protect the light bulb in the refrigerator from being damaged. It is made of a durable plastic material and is designed to fit most GE refrigerators. The shield has two clips that attach to the sides of the refrigerat...

GE SHIELD LIGHT FZ - Part# WR17X11480 is a replacement part for GE refrigerator models. It is a light shield that fits over the light bulb in the refrigerator. The shield helps to protect the bulb from dust and other debris, as well as providing a more even distribution of light throughout the ref...

The GE SLIDE AND BRACKET ASM R - Part# WR72X10194 is a part used in refrigerators. It is a slide and bracket assembly that helps to support the refrigerator door. The assembly includes two brackets, one for the top of the door and one for the bottom, as well as two slides that attach to the door a...

GE Support shelf - Part# WR02X12187 is a part used in some GE refrigerators. It is a plastic shelf support that helps to hold the shelves in place. The shelf support is designed to fit into the side walls of the refrigerator and is secured with two screws. This part helps to keep the shelves from ...

GE Thermostat Defrost Control Part# WR50X10069 is a replacement part for GE refrigerators. It is a thermostat that controls the defrost cycle of the refrigerator. The thermostat monitors the temperature inside the refrigerator and when it reaches a certain temperature, it will activate the defrost...

GE Thimble Door (Part# WR01X10206) is a replacement part for a range or oven. It is used to secure the oven door in place and provide a tight seal. The thimble door is made of metal and has a spring-loaded design that allows it to be easily installed and removed. It fits most GE ranges and ovens, ...

The GE Water Valve - Part# WR57X10065 is a water valve designed for use in General Electric refrigerators. It is a two-way valve that controls the flow of water from the refrigerator's water supply line to the ice maker and water dispenser. The valve has two ports, one for the incoming cold water ...