Model: GCE21LGYBFSS

GE Auger Part# WR17X11263 is a replacement part for GE Ice Makers. It is a plastic auger that helps to move the ice cubes from the ice bin to the dispenser chute. The auger is made of durable plastic and measures approximately 8 inches in length and 1 inch in diameter. It has a flat end that fits ...

The GE Auger Motor boot, Part# WR02X11767, is a replacement part for the auger motor in some GE refrigerators. It is a black rubber boot that fits over the auger motor and helps to keep dust and debris out of the motor. The boot also helps to reduce noise from the motor. This part is used in some ...

The GE Bottom Bracket Evap (Part# WR17X12635) is a part used in refrigerators to help circulate air around the refrigerator. It is located at the bottom of the refrigerator and helps to keep the air circulating throughout the unit. The evaporation helps to keep the temperature inside the refrigera...

GE CAM CLOSURE Part# WR02X10779 is a replacement part for GE refrigerators. It is a plastic cam closure that is used to secure the refrigerator door in place. The cam closure is located on the top of the refrigerator door and it helps to keep the door closed when it is shut. The cam closure also h...

GE CAM CLOSURE Part# WR02X10780 is a replacement part for GE refrigerators. It is a plastic cam closure that is used to secure the refrigerator door to the refrigerator cabinet. The cam closure has two parts: a cam and a bracket. The cam is attached to the door and the bracket is attached to the c...

GE CLAMP TUBE - Part# WR02X12265 is a part used in many GE refrigerators. It is a plastic tube clamp that is used to secure the water line to the refrigerator. The clamp helps to keep the water line from vibrating and coming loose. It also helps to prevent leaks and other damage that can occur whe...

The GE Clear Insert Door Module - Part# WR71X10761 is a replacement part for GE refrigerators. It is a clear plastic insert that fits into the door of the refrigerator and helps to keep the temperature inside the refrigerator consistent. The insert helps to reduce cold air loss when the door is op...

GE Cover Pan Glass - Part# WR32X10200 is a replacement part for a variety of GE refrigerator models. It is a glass cover pan that fits over the evaporator fan motor in the back of the refrigerator. This part helps to protect the fan motor from dust and debris, and also helps to keep the refrigerat...

GE DIVERTER OVERFLOW - Part# WR17X11449 is a part used in GE refrigerators. It is a diverter overflow tube that helps to divert water from the refrigerator's main water line to the ice maker. The diverter overflow tube is connected to the main water line and then runs down into the ice maker. This...

GE Door Dairy Clear - Part# WR22X10042 is a replacement part for GE refrigerators. It is a clear plastic door dairy bin that fits into the top of the refrigerator door. This part is designed to hold dairy items such as butter, cheese, and yogurt. It is made of durable plastic and features a smooth...

GE Duct Asm Ff Transition - Part# WR02X13091 is a part manufactured by General Electric (GE) for use in ducted air conditioning systems. It is a transition piece that connects two different sized ducts together, allowing air to flow from one to the other. The part number WR02X13091 indicates that ...

GE FASTENER HANDLE SS - Part# WR02X12800 is a stainless steel fastener handle manufactured by General Electric. It is used to secure the door or drawer of a refrigerator, freezer, or other appliance. The handle is made of stainless steel and has a polished finish. It features two mounting holes fo...

GE Gasket - Part# WR24X10234 is a replacement part for GE refrigerators. It is a rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of a durable rubber material and is designed to fit most GE refrigerators. It measures 24 inches wide by 1...

GE GASKET PAN CVR FRONT - Part# WR14X10169 is a replacement part for a General Electric refrigerator. It is a gasket that fits around the front of the refrigerator's drip pan, which is located at the bottom of the refrigerator. The gasket helps to keep moisture and dirt out of the drip pan, and al...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Evaporator Fan Motor - Part# WR60X10307 is a replacement part for refrigerators. It is designed to circulate air throughout the refrigerator and freezer compartments, helping to maintain a consistent temperature. The motor is locat...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Freezer Ice Dispenser Auger Drive - Part# WR02X11941 is a replacement part for refrigerators and freezers. It is an auger drive that helps to dispense ice from the refrigerator or freezer. The auger drive is a motorized device that...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Dispenser Door Solenoid Assembly - Part# WR62X10055 is a replacement part for refrigerators. It is a solenoid assembly that helps to open and close the refrigerator’s dispenser door. The solenoid assembly consists of a coil, plunger, a...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator WATER TANK - Part# WR17X11440 is a replacement water tank for select GE, Hotpoint, PartsIPS and Kenmore refrigerators. This water tank is designed to provide a steady supply of cold water to the refrigerator's ice maker and dispenser. ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Grommet - Part# WR02X12008 is a replacement part for refrigerators. It is a rubber grommet that fits around the evaporator fan motor in the refrigerator. The grommet helps to reduce vibration and noise from the fan m...

GE Handle (Part# WR12X10626) is a replacement handle for GE refrigerators. It is made of durable plastic and is designed to fit a variety of GE refrigerator models. The handle has a white finish and features a textured grip for easy handling. It also includes two screws for installation. This hand...

GE Harness Board Indiv - Part# WR23X10503 is a replacement part for General Electric (GE) refrigerators. It is a wiring harness board that connects the various electrical components of the refrigerator, such as the compressor, condenser fan motor, evaporator fan motor, and temperature control boar...

GE Harness Ff Lt - Part# WR23X10493 is a harness assembly for a General Electric refrigerator. It is used to connect the refrigerator's main control board to the evaporator fan motor. The harness includes two connectors, one for the control board and one for the fan motor. The harness also include...

GE Harness Motor & Sol Part# WR23X10330 is a replacement part for GE refrigerators. It is a motor and solenoid assembly that controls the defrost cycle of the refrigerator. The motor and solenoid assembly are connected to the defrost timer, which is located in the control panel of the refrigerator...

GE Heater & Bracket Assy - Part# WR51X10042 is a replacement part for GE refrigerators. It is a complete assembly that includes the heater, bracket, and wiring harness. The heater is used to defrost the evaporator coils in the refrigerator to prevent ice buildup. The bracket holds the heater in pl...

GE Insul Tube Foam - Part# WR02X11288 is a foam insulation tube designed to fit around the outside of a refrigerator condenser coil. It is used to reduce heat transfer from the condenser coil to the surrounding environment, helping to keep the refrigerator running more efficiently. The insulation ...

GE LEVER ASM FF - Part# WR11X10009 is a part for a General Electric refrigerator. It is the freezer door lever assembly, which is used to open and close the freezer door. The part number WR11X10009 is specific to certain models of GE refrigerators. This lever assembly includes the handle, lever ar...

GE LEVER ASM FZ - Part# WR11X10010 is a replacement part for GE refrigerators. It is a lever assembly that is used to open and close the freezer door. The part number WR11X10010 is specific to certain models of GE refrigerators. This lever assembly includes the lever, mounting bracket, and screws....

The GE Pin Hinge Btm Adj Hollow - Part# WR02X12263 is a replacement part for General Electric (GE) refrigerators. It is a pin hinge bottom adjustment hollow part that is used to adjust the bottom of the refrigerator door. This part is made of plastic and metal and measures approximately 1-1/2 inch...

GE Scr 12-24 Tt Hx 7/8 S - Part# WR01X10792 is a replacement part for a GE refrigerator. It is a defrost heater assembly that is used to keep the evaporator coils from freezing up in the refrigerator. The part number WR01X10792 is the manufacturer's part number for this specific defrost heater ass...

GE SCR 8-18 DG TRT20 5/8 S - Part# WR01X10621 is a part number for a GE refrigerator start relay. This start relay is used to control the compressor motor in the refrigerator. It is an 8-pin single-phase relay with a 20A rating and 5/8" spade terminals. The relay is designed to be used with GE ref...

GE Scr8-18 AB UFL 1 1/2 SS - Part# WR01X10568 is a stainless steel, 1-1/2 inch Universal Flange (UFL) screw from General Electric (GE). It is part of the GE Scr8-18 AB series, which is a line of screws designed for use in various applications. The UFL design allows for easy installation and remova...

GE SEAL SIDES CHILL - Part# WR14X10159 is a replacement part for GE refrigerators. It is a white plastic part that seals the sides of the refrigerator to keep cold air in and warm air out. The part helps to maintain the temperature inside the refrigerator and keep food fresh. It also helps to redu...

A GE set screw, part# WR01X10450, is a type of fastener used to secure two or more objects together. It is a threaded fastener that is inserted into a pre-drilled hole and tightened with a wrench or screwdriver. The set screw has a flat head and is made of steel for strength and durability. It is ...

GE SHIELD ASSY TROUGH - Part# WR17X10811 is a part used in GE refrigerators. It is a metal shield that is used to protect the refrigerator's evaporator fan motor from dust and debris. The shield also helps to keep the evaporator fan motor cool by allowing air to flow around it. The part number WR1...

GE Shield Light FF (Part# WR17X12200) is a refrigerator light shield designed to protect the light bulb in the refrigerator from being damaged. It is made of a durable plastic material and is designed to fit most GE refrigerators. The shield has two clips that attach to the sides of the refrigerat...

GE SHIELD LIGHT FZ - Part# WR17X11480 is a replacement part for GE refrigerator models. It is a light shield that fits over the light bulb in the refrigerator. The shield helps to protect the bulb from dust and other debris, as well as providing a more even distribution of light throughout the ref...

The GE SLIDE AND BRACKET ASM R - Part# WR72X10194 is a part used in refrigerators. It is a slide and bracket assembly that helps to support the refrigerator door. The assembly includes two brackets, one for the top of the door and one for the bottom, as well as two slides that attach to the door a...

The GE Spring Deflector Int. - Part# WR02X11768 is a part used in refrigerators to help keep the refrigerator door from slamming shut. It is a spring-loaded device that attaches to the top of the refrigerator door and helps to absorb the shock of closing the door. The spring deflector works by all...

GE Spring Torsion - Part# WR02X12256 is a replacement part for GE refrigerators. It is a spring torsion that helps to keep the refrigerator door closed. The spring torsion is made of metal and has a black finish. It measures approximately 2 inches in length and 1 inch in width. This part is used t...

GE Support shelf - Part# WR02X12187 is a part used in some GE refrigerators. It is a plastic shelf support that helps to hold the shelves in place. The shelf support is designed to fit into the side walls of the refrigerator and is secured with two screws. This part helps to keep the shelves from ...

The GE Thermostat Defrost Control (Part# WR50X10065) is a replacement part for refrigerators and freezers. It is used to control the defrost cycle of the appliance. The thermostat works by sensing the temperature inside the refrigerator or freezer and turning on the defrost cycle when it reaches a...

GE Thimble Door (Part# WR01X10232) is a replacement part for GE dryers. It is a metal door that fits over the dryer drum and seals the opening when the dryer is not in use. The thimble door helps to keep lint and other debris from entering the drum, which can cause problems with the dryer's perfor...

The GE Water Valve - Part# WR57X10065 is a water valve designed for use in General Electric refrigerators. It is a two-way valve that controls the flow of water from the refrigerator's water supply line to the ice maker and water dispenser. The valve has two ports, one for the incoming cold water ...

Hinge Top & Pin FF (Part# WR13X10215) is a part used in many refrigerator models. It is a two-piece assembly consisting of a hinge top and pin. The hinge top is made of plastic and attaches to the top of the refrigerator door. The pin is made of metal and fits into the hinge top, allowing the door...