Model: GCE21LGTBFSS

GE Auger Part# WR17X11263 is a replacement part for GE Ice Makers. It is a plastic auger that helps to move the ice cubes from the ice bin to the dispenser chute. The auger is made of durable plastic and measures approximately 8 inches in length and 1 inch in diameter. It has a flat end that fits ...

The GE Auger Motor boot, Part# WR02X11767, is a replacement part for the auger motor in some GE refrigerators. It is a black rubber boot that fits over the auger motor and helps to keep dust and debris out of the motor. The boot also helps to reduce noise from the motor. This part is used in some ...

GE CAM CLOSURE Part# WR02X10779 is a replacement part for GE refrigerators. It is a plastic cam closure that is used to secure the refrigerator door in place. The cam closure is located on the top of the refrigerator door and it helps to keep the door closed when it is shut. The cam closure also h...

GE CAM CLOSURE Part# WR02X10780 is a replacement part for GE refrigerators. It is a plastic cam closure that is used to secure the refrigerator door to the refrigerator cabinet. The cam closure has two parts: a cam and a bracket. The cam is attached to the door and the bracket is attached to the c...

GE CAP CORNER OC BLACK - Part# WR02X10781 is a replacement part for General Electric (GE) refrigerators. It is a black corner cap that fits over the corner of the refrigerator door. This part helps to keep the door sealed and prevents air from entering the refrigerator. The part number WR02X10781 ...

GE CLAMP TUBE - Part# WR02X12265 is a part used in many GE refrigerators. It is a plastic tube clamp that is used to secure the water line to the refrigerator. The clamp helps to keep the water line from vibrating and coming loose. It also helps to prevent leaks and other damage that can occur whe...

The GE Clear Insert Door Module - Part# WR71X10761 is a replacement part for GE refrigerators. It is a clear plastic insert that fits into the door of the refrigerator and helps to keep the temperature inside the refrigerator consistent. The insert helps to reduce cold air loss when the door is op...

GE Cover Pan Glass - Part# WR32X10200 is a replacement part for a variety of GE refrigerator models. It is a glass cover pan that fits over the evaporator fan motor in the back of the refrigerator. This part helps to protect the fan motor from dust and debris, and also helps to keep the refrigerat...

GE DIVERTER OVERFLOW - Part# WR17X11449 is a part used in GE refrigerators. It is a diverter overflow tube that helps to divert water from the refrigerator's main water line to the ice maker. The diverter overflow tube is connected to the main water line and then runs down into the ice maker. This...

GE Door Dairy Clear - Part# WR22X10042 is a replacement part for GE refrigerators. It is a clear plastic door dairy bin that fits into the top of the refrigerator door. This part is designed to hold dairy items such as butter, cheese, and yogurt. It is made of durable plastic and features a smooth...

GE GASKET PAN CRV FRONT - Part# WR14X10059 is a replacement part for a General Electric refrigerator. It is the gasket that seals the front of the crisper pan in place. The gasket is made of flexible rubber and helps to keep the cold air inside the refrigerator and prevent warm air from entering. ...

GE Gasket Pan Crv Rear - Part# WR14X10058 is a replacement part for General Electric (GE) refrigerators. It is a rear gasket that fits around the pan at the back of the refrigerator. This gasket helps to keep cold air in and warm air out, helping to maintain the desired temperature inside the refr...

GE GASKET PAN CVR FRONT - Part# WR14X10169 is a replacement part for a General Electric refrigerator. It is a gasket that fits around the front of the refrigerator's drip pan, which is located at the bottom of the refrigerator. The gasket helps to keep moisture and dirt out of the drip pan, and al...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Freezer Ice Dispenser Auger Drive - Part# WR02X11941 is a replacement part for refrigerators and freezers. It is an auger drive that helps to dispense ice from the refrigerator or freezer. The auger drive is a motorized device that...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Dispenser Door Solenoid Assembly - Part# WR62X10055 is a replacement part for refrigerators. It is a solenoid assembly that helps to open and close the refrigerator’s dispenser door. The solenoid assembly consists of a coil, plunger, a...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Motor DC - Part# WR60X10185 is a direct current (DC) motor that is used to power the evaporator fan in a refrigerator. This motor is designed to circulate air throughout the refrigerator and freezer compartments, helping...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator WATER TANK - Part# WR17X11440 is a replacement water tank for select GE, Hotpoint, PartsIPS and Kenmore refrigerators. This water tank is designed to provide a steady supply of cold water to the refrigerator's ice maker and dispenser. ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Grommet - Part# WR02X12008 is a replacement part for refrigerators. It is a rubber grommet that fits around the evaporator fan motor in the refrigerator. The grommet helps to reduce vibration and noise from the fan m...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Light Bulb 6W 12V Candalabra Base - Part# WR02X12208 is a replacement light bulb for refrigerators. It is a 6 watt, 12 volt candelabra base bulb with a part number of WR02X12208. This light bulb is designed to fit many different mo...

GE Grille Recess BK - Part# WR17X11655 is a replacement part for GE refrigerator models. It is a black grille recess that fits into the front of the refrigerator to cover the air vent. The grille recess helps to keep the air flow in and out of the refrigerator consistent, while also providing a de...

The GE Grommet Base Grill - Part# WR02X10689 is a replacement part for many GE refrigerators. It is a plastic base grill that fits around the bottom of the refrigerator door and helps to keep food and other items from falling out of the refrigerator. The grill is made of durable plastic and has a ...

GE Handle (Part# WR12X10626) is a replacement handle for GE refrigerators. It is made of durable plastic and is designed to fit a variety of GE refrigerator models. The handle has a white finish and features a textured grip for easy handling. It also includes two screws for installation. This hand...

GE Harness Ac Fz Intermediate - Part# WR23X10487 is a replacement part for GE refrigerators. It is an electrical harness that connects the main control board to the compressor, condenser fan motor, and evaporator fan motor. This part is used to replace a damaged or faulty harness in order to resto...

GE Harness Board Indiv - Part# WR23X10503 is a replacement part for General Electric (GE) refrigerators. It is a wiring harness board that connects the various electrical components of the refrigerator, such as the compressor, condenser fan motor, evaporator fan motor, and temperature control boar...

GE Harness Ff Lt - Part# WR23X10493 is a harness assembly for a General Electric refrigerator. It is used to connect the refrigerator's main control board to the evaporator fan motor. The harness includes two connectors, one for the control board and one for the fan motor. The harness also include...

GE Harness Motor & Sol Part# WR23X10330 is a replacement part for GE refrigerators. It is a motor and solenoid assembly that controls the defrost cycle of the refrigerator. The motor and solenoid assembly are connected to the defrost timer, which is located in the control panel of the refrigerator...

GE Heater & Bracket Assy - Part# WR51X10042 is a replacement part for GE refrigerators. It is a complete assembly that includes the heater, bracket, and wiring harness. The heater is used to defrost the evaporator coils in the refrigerator to prevent ice buildup. The bracket holds the heater in pl...

GE Insul Tube Foam - Part# WR02X11288 is a foam insulation tube designed to fit around the outside of a refrigerator condenser coil. It is used to reduce heat transfer from the condenser coil to the surrounding environment, helping to keep the refrigerator running more efficiently. The insulation ...

GE LEVER ASM FF - Part# WR11X10009 is a part for a General Electric refrigerator. It is the freezer door lever assembly, which is used to open and close the freezer door. The part number WR11X10009 is specific to certain models of GE refrigerators. This lever assembly includes the handle, lever ar...

GE LEVER ASM FZ - Part# WR11X10010 is a replacement part for GE refrigerators. It is a lever assembly that is used to open and close the freezer door. The part number WR11X10010 is specific to certain models of GE refrigerators. This lever assembly includes the lever, mounting bracket, and screws....

The GE Orifice Fan Assy - Part# WR17X10812 is a replacement part for GE refrigerators. It is a fan assembly that helps to circulate air within the refrigerator. The fan is located in the back of the refrigerator and helps to move cold air from the evaporator coils to the freezer and fresh food com...

The GE Pin Hinge Btm Adj Hollow - Part# WR02X12263 is a replacement part for General Electric (GE) refrigerators. It is a pin hinge bottom adjustment hollow part that is used to adjust the bottom of the refrigerator door. This part is made of plastic and metal and measures approximately 1-1/2 inch...

GE Scr8-18 AB UFL 1 1/2 SS - Part# WR01X10568 is a stainless steel, 1-1/2 inch Universal Flange (UFL) screw from General Electric (GE). It is part of the GE Scr8-18 AB series, which is a line of screws designed for use in various applications. The UFL design allows for easy installation and remova...

GE SCREW - Part# WR01X10631 is a replacement part for General Electric (GE) appliances. It is a screw used to secure the door handle to the door on some GE refrigerators. The screw is made of metal and has a Phillips head. It measures approximately 1/2 inch in length and has a diameter of #8-32. T...

GE SEAL SIDES CHILL - Part# WR14X10159 is a replacement part for GE refrigerators. It is a white plastic part that seals the sides of the refrigerator to keep cold air in and warm air out. The part helps to maintain the temperature inside the refrigerator and keep food fresh. It also helps to redu...

A GE set screw, part# WR01X10450, is a type of fastener used to secure two or more objects together. It is a threaded fastener that is inserted into a pre-drilled hole and tightened with a wrench or screwdriver. The set screw has a flat head and is made of steel for strength and durability. It is ...

GE Shelf Fixed Fz - Part# WR71X10527 is a replacement shelf for GE refrigerators. It is a fixed shelf that is designed to fit into the interior of the refrigerator and provide additional storage space. The shelf is made of durable plastic and features a white finish. It measures approximately 16 i...

GE SHIELD ASSY TROUGH - Part# WR17X10811 is a part used in GE refrigerators. It is a metal shield that is used to protect the refrigerator's evaporator fan motor from dust and debris. The shield also helps to keep the evaporator fan motor cool by allowing air to flow around it. The part number WR1...

GE Shield Light FF (Part# WR17X12200) is a refrigerator light shield designed to protect the light bulb in the refrigerator from being damaged. It is made of a durable plastic material and is designed to fit most GE refrigerators. The shield has two clips that attach to the sides of the refrigerat...

GE SHIELD LIGHT FZ - Part# WR17X11480 is a replacement part for GE refrigerator models. It is a light shield that fits over the light bulb in the refrigerator. The shield helps to protect the bulb from dust and other debris, as well as providing a more even distribution of light throughout the ref...

The GE SLIDE AND BRACKET ASM R - Part# WR72X10194 is a part used in refrigerators. It is a slide and bracket assembly that helps to support the refrigerator door. The assembly includes two brackets, one for the top of the door and one for the bottom, as well as two slides that attach to the door a...

The GE Slide Middle Pan Cover - Part# WR02X10633 is a replacement part for a range or oven. It is a metal cover that fits over the middle pan on the slide-in range. This part helps to keep food and other debris from falling into the oven cavity, while also providing an aesthetic look to the applia...

GE STOP SHELF - Part# WR02X10662 is a replacement part for GE refrigerators. It is a plastic shelf stop that helps to keep shelves in place and prevent them from sliding out of the refrigerator. The shelf stop is designed to fit on the side of the refrigerator and attaches to the shelf with two sc...

GE Support shelf - Part# WR02X12187 is a part used in some GE refrigerators. It is a plastic shelf support that helps to hold the shelves in place. The shelf support is designed to fit into the side walls of the refrigerator and is secured with two screws. This part helps to keep the shelves from ...

GE Thermostat Defrost Control Part# WR50X10069 is a replacement part for GE refrigerators. It is a thermostat that controls the defrost cycle of the refrigerator. The thermostat monitors the temperature inside the refrigerator and when it reaches a certain temperature, it will activate the defrost...

GE Thimble Door (Part# WR01X10232) is a replacement part for GE dryers. It is a metal door that fits over the dryer drum and seals the opening when the dryer is not in use. The thimble door helps to keep lint and other debris from entering the drum, which can cause problems with the dryer's perfor...

The GE Water Valve - Part# WR57X10065 is a water valve designed for use in General Electric refrigerators. It is a two-way valve that controls the flow of water from the refrigerator's water supply line to the ice maker and water dispenser. The valve has two ports, one for the incoming cold water ...

GE WHEEL PAN CO - Part# WR01X10209 is a replacement part for a washing machine. It is the wheel pan, which is the plastic piece that holds the wheels in place on the bottom of the washer. The wheel pan helps to keep the wheels in place and prevents them from slipping or coming off during operation...