Model: GA9800

The Fisher & Paykel FSF-40/50 Basket Hanger - Part# 215410 is a replacement part for Fisher & Paykel dishwashers. This part is used to hang the dishwasher baskets in place. It is made of durable plastic and features a clip that attaches to the basket and a hook that attaches to the dishwasher fram...

The Maytag Block, Fuse Part# 207167 is a replacement part for Maytag appliances. It is a fuse block that helps protect the appliance from electrical overloads. The fuse block contains two fuses, one for the main power and one for the control circuit. The fuse block is designed to fit in the applia...

The Maytag Clutch Plate (Part# 215395) is a replacement part for Maytag washers. It is a metal plate that is used to connect the motor to the transmission in the washer. The clutch plate helps to transfer power from the motor to the transmission, allowing the washer to spin and agitate. It also he...

Maytag INFINITE LEVEL PRESS - Part# 207360 is a commercial grade laundry press designed to provide an infinite range of pressing levels. It features a patented, two-stage pressing system that allows for both low and high pressure settings. The press also has an adjustable temperature control, allo...

The Maytag Injector Fill Hose - Part# Y215234 is a replacement part for Maytag dishwashers. It is a flexible hose that connects the water inlet valve to the injector assembly. The hose is made of durable rubber and is designed to withstand high temperatures and pressures. The hose measures approxi...

The Maytag Plug for Filter Hole (Part# 215980) is a replacement part designed to fit into the filter hole of a Maytag washing machine. This plug is used to seal the filter hole and prevent water from leaking out. It is made of durable plastic and is easy to install. The plug measures approximately...

Maytag SPRING, AGITATOR SHA - Part# 215581 is a replacement part for Maytag washing machines. It is a spring that attaches to the agitator shaft and helps to keep the agitator in place during the wash cycle. The spring is made of metal and is designed to be durable and long-lasting. This part is c...

The Maytag Whirlpool KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Washer Washing Machine Lid Check Switch - Part# 207166 is a safety device that is designed to prevent the washer from operating if the lid is open. The switch is located on the lid of the washer and when ...

The Maytag Whirlpool KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Washer Water Inlet Fill Valve - Part# 205613 is a replacement part for washing machines. It is designed to control the flow of water into the washer during the fill cycle. The valve is made of durable pla...

P1-INLET HOSE, 5 FT. - Part# 202860 is a five-foot long inlet hose used to connect a pressure washer to a water source. It is made of durable rubber and features a universal fitting that can be used with most pressure washers. The hose has an inner diameter of 3/8 inch and an outer diameter of 1/2...

The Whirlpool Agitator W is a replacement part for Whirlpool washing machines. It is a direct replacement for the original agitator that came with the machine. The agitator is responsible for moving the clothes around in the washer during the wash cycle. This part number, WP207228, is designed to ...

The Whirlpool Cap Part# WP214725 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the top of the agitator, which is the central part of the washing machine that moves back and forth to help clean clothes. The cap helps keep dirt and debris from entering the ...

The Whirlpool Drain Hose (Part# WP213045) is a flexible hose designed to connect the dishwasher to the sink drain. It is made of a durable plastic material and measures 8 feet in length. The hose has an inner diameter of 5/8 inch and an outer diameter of 1-1/4 inches. It features a 90-degree elbow...

The Whirlpool Hose - Part# WPY215234 is a replacement hose for Whirlpool washing machines. It is made of high-quality rubber and plastic materials, making it durable and long-lasting. The hose measures 4 feet in length and has a 5/8 inch diameter. It is designed to fit most Whirlpool washers, incl...

The Whirlpool Maytag KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Washer Washing Machine SIPHON BREAK W SEAL & CLAMP - Part# 206638 is a replacement part for clothes washers. It is designed to replace the existing siphon break and seal in the washing machine. The part i...

A Whirlpool Pump Belt, Part# WP211451, is a replacement part for a variety of Whirlpool washing machines. It is a flat belt made of rubber and is used to drive the pump motor in the washing machine. The belt helps to keep the motor running smoothly and efficiently. It also helps to reduce noise an...

The Whirlpool Sleeve - Part# WP215447 is a replacement part for a variety of Whirlpool washing machines. It is a plastic sleeve that fits over the agitator shaft and helps to reduce noise and vibration during the wash cycle. The sleeve also helps to protect the agitator from wear and tear. It is m...

Whirlpool Spring-Agit Part# WP215581 is a replacement part for Whirlpool washing machines. It is a spring-loaded agitator that helps to move the clothes around in the washer during the wash cycle. The spring-agitator helps to ensure that all of the clothes are evenly distributed in the washer and ...

The Whirlpool Switch-Washer Lid Check is a replacement part for Whirlpool washers. It is a safety switch that prevents the washer from operating if the lid is open. The switch is located on the lid of the washer and when it is closed, it allows power to flow to the motor and other components of th...

The Whirlpool TUBE - Part# WP215235 is a replacement part for Whirlpool washing machines. It is a plastic tube that connects the water inlet valve to the water pump. This tube helps to regulate the flow of water into the washing machine and helps to ensure that the correct amount of water is used ...

The Whirlpool TUBE-INLE is a part used in many Whirlpool washing machines. It is a plastic tube that connects the water inlet valve to the water pump. The part number WP214433 is used to identify this specific part. This part helps to ensure that the correct amount of water enters the washing mach...