Model: GA308

The Fisher & Paykel Bake Element 27 Wall Oven - Part# 211704 is a wall oven designed to provide even heat distribution and consistent baking results. This oven features a large capacity of 4.2 cubic feet, with two adjustable racks that can accommodate up to six standard-sized baking pans. The bake...

Fisher & Paykel Nut W/Ret 8-32 - Part# 211410 is a nut and retainer assembly designed for use with Fisher & Paykel appliances. This part is used to secure the door of the appliance to the frame. It consists of a nut and a retainer that are made from durable plastic material. The nut has an 8-32 th...

Maytag DAMPER PADS 3 PACK W/POLY - Part# 203956 are replacement parts for Maytag dryers. They are designed to reduce vibration and noise in the dryer. The pads are made of a polyester material that is durable and long-lasting. The pads come in a three-pack and are easy to install. They help to red...

The Maytag Rubber Seal, O-Ring - Part# 210690 is a replacement part for Maytag washing machines. It is an O-ring made of rubber that seals the connection between the water inlet valve and the water supply line. This seal helps to prevent water from leaking out of the machine and into the surroundi...

Maytag SEAL - TUB - Part# 211232 is a replacement part for Maytag washing machines. It is a rubber seal that fits around the tub of the washing machine and helps to keep water from leaking out. The seal is made of durable rubber and is designed to last for many years. It is an important part of th...

Maytag SPRING - Part# 211065 is a replacement part for Maytag washing machines. It is a spring that is used to help keep the lid of the washing machine closed. The spring is made of metal and measures approximately 3 inches in length. It has a diameter of 0.25 inches and a wire thickness of 0.09 i...

Maytag SPRING FOR UNBALANCE - Part# 213720 is a replacement part for Maytag washers. It is a spring that helps to keep the washer balanced during operation. The spring helps to absorb any vibration or movement that may occur during the washing cycle, ensuring that the washer remains stable and doe...

Maytag Tension Springs are a part used in Maytag washing machines. The part number is 202718. These springs are used to help keep the drum of the washing machine in place and provide tension on the drive belt. The tension springs are located on the back of the washer and attach to the frame of the...

The Maytag Whirlpool KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Washer Water Inlet Fill Valve - Part# 205613 is a replacement part for washing machines. It is designed to control the flow of water into the washer during the fill cycle. The valve is made of durable pla...

P1-INLET HOSE, 5 FT. - Part# 202860 is a five-foot long inlet hose used to connect a pressure washer to a water source. It is made of durable rubber and features a universal fitting that can be used with most pressure washers. The hose has an inner diameter of 3/8 inch and an outer diameter of 1/2...

The Whirlpool BALL Part# WP211726 is a part used in Whirlpool washing machines. It is a plastic ball that is placed inside the washing machine drum to help evenly distribute the clothes during the wash cycle. The ball helps to ensure that all of the clothes are washed evenly and that they don’t ge...

The Whirlpool BUMPER-LI Part# WP212716 is a replacement part for a Whirlpool washer. It is a plastic bumper that is used to cushion the impact of the washer lid when it is opened and closed. The bumper helps to reduce noise and vibration from the lid, as well as providing protection for the washer...

The Whirlpool Cap Part# WP214725 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the top of the agitator, which is the central part of the washing machine that moves back and forth to help clean clothes. The cap helps keep dirt and debris from entering the ...

The Whirlpool Drain Hose (Part# WP213045) is a flexible hose designed to connect the dishwasher to the sink drain. It is made of a durable plastic material and measures 8 feet in length. The hose has an inner diameter of 5/8 inch and an outer diameter of 1-1/4 inches. It features a 90-degree elbow...

The Whirlpool Hose-Injector Part# WP213013 is a replacement part for Whirlpool dishwashers. It is a hose that connects the water inlet valve to the spray arm. The hose injector helps to ensure that the water is evenly distributed throughout the dishwasher, allowing for better cleaning performance....

7 The Whirlpool Maytag Magic Chef KitchenAid Roper Norge PartsIPS Kenmore Admiral Amana Washer Motor Spring and Guide Kit - Part# 2050007 is a replacement part for washers. It includes a motor spring and guide that helps to keep the motor in place and provide stability during operation. The kit als...

The Whirlpool Nozzle (Part# WP213015) is a replacement part for Whirlpool dishwashers. It is a plastic nozzle that attaches to the bottom of the dishwasher and sprays water onto the dishes during the wash cycle. The nozzle has two outlets, one for the main wash cycle and one for the rinse cycle. T...

Whirlpool Nut-Bolt Part# 205529 is a genuine OEM replacement part for Whirlpool brand appliances. This nut-bolt is used to secure the outer tub to the inner tub in washing machines. It is made of metal and measures 1/4 inch in diameter and 1/2 inch in length. The part number 205529 can be found on...

Whirlpool Nut-Eyebo Part# WP211949 is a replacement part for Whirlpool dishwashers. It is a nut and eyebolt assembly that helps secure the dishwasher to the countertop. The nut and eyebolt assembly is made of metal and includes two nuts, two washers, and an eyebolt. The nut and eyebolt assembly he...

The Whirlpool Seal - Part# WP211232 is a replacement part for a variety of Whirlpool washing machines. It is a rubber seal that fits around the inner tub of the washing machine and helps to keep water from leaking out. The seal is designed to fit specific models of Whirlpool washers, so it is impo...

Whirlpool Spring - Part# WP213720 is a replacement part for Whirlpool washers. It is a coil spring that is used to help support the weight of the washer tub and helps to keep it in place. The spring is made of steel and measures approximately 1-1/4" in diameter and 1-3/4" in length. It has a zinc ...

The Whirlpool SWSN BELT - Part# WP211125 is a replacement dryer belt for Whirlpool, Kenmore, and Roper dryers. This belt is made of high-quality rubber and measures 92 inches in length and 1/4 inch in width. It is designed to replace the original belt on your dryer and help keep it running smoothl...

The Whirlpool WP205001 Timer is a replacement part for many Whirlpool washing machines. It is a mechanical timer that controls the length of the wash cycle. The timer knob on the front of the machine can be turned to select the desired cycle time, and then the timer will automatically turn off whe...

The Whirlpool WASHER-RET Part# Y015666 is a replacement part for Whirlpool washing machines. It is a water inlet valve that helps regulate the flow of water into the washing machine. The valve is designed to be easy to install and comes with all necessary hardware and instructions. It is made of d...