Model: FGS337GW5

Whirlpool Baffle-Ht Part# 8053967 is a replacement part for Whirlpool dryers. It is a metal baffle that helps to evenly distribute the heat inside the dryer drum. The baffle is designed to fit into the back of the dryer and has two slots that allow air to flow through it. This helps to ensure that...

The Whirlpool BOTTOM-OVEN Part# WP3195097 is a bottom-mount oven that features a large capacity of 5.3 cubic feet. It has a stainless steel finish and is designed to fit in most standard kitchen cabinets. The oven has an electronic touch control panel with an LCD display for easy operation. It als...

The Whirlpool CAP-BURNER SMALL BLACK - Part# WP3191898 is a replacement part for a range or cooktop. It is a small black burner cap that fits over the burner head to help keep it clean and protect it from spills and splatters. The cap is made of durable plastic and has a diameter of 2-3/4 inches. ...

Whirlpool CLIP Part# 3196925 is a genuine OEM (Original Equipment Manufacturer) part designed for use with Whirlpool dishwashers. This clip is used to secure the dishwasher door to the frame. It is made of plastic and measures approximately 1-1/2 inches in length and 1/2 inch in width. The clip ha...

The Whirlpool Door Switch - Part# 3196262 is a replacement part for Whirlpool washing machines. It is a single-pole, double-throw (SPDT) switch that is used to detect when the washing machine door is opened or closed. The switch has two terminals, one for the power supply and one for the control c...

Whirlpool FOOT-LEVEL Part# WP3196037 is a replacement part for Whirlpool washing machines. It is a foot-leveling leg that helps to level the washing machine and keep it stable during operation. The foot-leveling leg is adjustable and can be adjusted to fit different floor surfaces. It is made of d...

The Whirlpool GLIDE-DRWR Part# WP3195546 is a full-extension drawer slide that is designed to provide smooth and quiet operation for drawers in kitchen cabinets. This slide features a ball bearing design that allows for easy and effortless movement of the drawer. The slide also has a self-closing ...

The Whirlpool GLIDE-DRWR Part# WP8053334 is a drawer glide kit designed to replace the drawer glides on select Whirlpool, KitchenAid, and Maytag brand dishwashers. This kit includes two drawer glides, four screws, and installation instructions. The drawer glides are made of durable plastic and fea...

The Whirlpool GRATE-BURNER Part# 8053458 is a replacement part for Whirlpool gas ranges. It is a replacement burner grate that fits most Whirlpool gas ranges. The grate is made of durable cast iron and has a black finish. It measures approximately 12 inches in diameter and is designed to fit into ...

The Whirlpool IGNTR-OVEN Part# WP8054129 is a wall oven with a built-in electronic ignition system. This oven features a 4.3 cubic foot capacity, self-cleaning cycle, and an adjustable broil element. The electronic ignition system eliminates the need for a standing pilot light, which helps to redu...

The Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Caloric Gaffers and Sattler Magic Chef Norge PartsIPS Kenmore Admiral Stove Range Oven Igniter Screw - Part# 8273062 is a replacement part for the igniter in a range or oven. This part is used to secure the igniter to the burner assembly. The ig...

The Whirlpool NUT Part# 8273060 is a replacement part for a variety of Whirlpool washing machines. It is a small plastic nut that fits into the back of the washer and helps to secure the drain hose to the back of the machine. The nut is designed to be used with a variety of different models, inclu...

The Whirlpool ORIFICE Part# 8273066 is a replacement part for Whirlpool gas dryers. It is a small metal orifice that regulates the flow of gas to the burner in the dryer. The orifice controls the amount of gas that is released, which in turn affects the temperature of the dryer. This part should b...

The Whirlpool ORIFICE Part# 8273067 is a part used in many Whirlpool gas dryers. It is a small, round, metal piece that fits into the gas valve and regulates the flow of gas to the burner. The orifice is responsible for controlling the amount of heat produced by the dryer. It works by allowing a c...

The Whirlpool Orifice Part# WP8273065 is a replacement part for Whirlpool gas dryers. It is an orifice, which is a small hole that controls the flow of gas to the burner. The orifice is located in the gas valve and regulates the amount of gas that flows to the burner. This part helps ensure that y...

The Whirlpool Orifice Part# WP8273066 is a part used in many Whirlpool gas dryers. It is a small, round metal piece that fits into the gas valve and regulates the flow of gas to the burner. The orifice is responsible for controlling the amount of heat produced by the dryer. It is important to repl...

The Whirlpool P1-GLIDE Part# 3195546 is a slide-in range designed to fit into a standard 30-inch opening. It features a 4.8 cubic foot oven capacity, two oven racks, and a self-cleaning cycle. The range also has an adjustable broil temperature and a delay bake option. The cooktop has four burners,...

The Whirlpool P1-ORIFICE - Part# 8273065 is a replacement part for Whirlpool gas dryers. It is an orifice that controls the flow of gas to the burner in the dryer. The orifice is made of brass and has a diameter of 0.125 inches. It is used to regulate the amount of gas that flows into the burner, ...

The Whirlpool PAN-BROILR Part# 3196076 is a powerful and efficient electric broiler that is designed to help you cook delicious meals quickly and easily. This electric broiler features a large cooking surface that can accommodate up to four steaks or other large cuts of meat. The cooking surface i...

The Whirlpool Pin - Part# 814381 is a genuine OEM replacement part for Whirlpool dishwashers. It is a small plastic pin that is used to secure the lower dishrack to the dishwasher tub. The pin is inserted into the lower dishrack and then secured with a locking nut. This part helps keep the dishrac...

Whirlpool PIN-COOKTP - Part# WP3195060 is a part used in Whirlpool ovens. It is a temperature probe that helps to accurately measure the internal temperature of food while it is cooking. The probe is inserted into the food and then connected to the oven’s control panel. The oven then uses the info...

Whirlpool RIVET - Part# 3196814 is a genuine OEM replacement part for Whirlpool appliances. It is a metal rivet used to secure parts together. This rivet is made of steel and has a diameter of 1/4 inch. It is used in many Whirlpool appliances, including refrigerators, dishwashers, dryers, and wash...

Whirlpool RIVET - Part# 3196815 is a replacement part for Whirlpool appliances. It is a rivet that is used to secure two pieces of metal together. The rivet has a round head and a stem that is inserted into the two pieces of metal and then hammered down to secure them together. The rivet is made f...

The Whirlpool Screw Part# 3196166 is a genuine OEM replacement part for many Whirlpool, KitchenAid, and Maytag appliances. This screw is used to secure the agitator to the transmission in top-load washers. It is made of metal and measures approximately 1/4 inch in diameter and 1-1/2 inches in leng...

The Whirlpool SCREW - Part# 3196183 is a replacement part for various Whirlpool appliances. It is a 6-32 x 1/2 inch Phillips head screw that is used to secure the door handle to the door panel on many Whirlpool refrigerators, freezers, and dishwashers. This screw is made of metal and has a zinc fi...

The Whirlpool Screw - Part# WP3196164 is a replacement part for Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw used to secure the control panel to the appliance. This screw is made of steel and has a zinc plated finish for corrosion resistance. It is an OEM (Original Equipment...

The Whirlpool Screw - Part# WP3196183 is a replacement part for Whirlpool appliances. It is a #10-32 x 1/2 inch long Phillips head screw used to secure the outer door panel to the refrigerator cabinet. This screw is made of metal and has a zinc finish for corrosion resistance. It is compatible wit...

Whirlpool Screw Part# WP3196557 is a replacement part for Whirlpool washers and dryers. It is a hex head screw with a length of 1-1/4 inches and a thread size of 8-32. This screw is used to secure the outer tub to the cabinet on some Whirlpool washers and dryers. It is made of metal and has a zinc...

Whirlpool Screw Part# WP8273062 is a replacement part for Whirlpool appliances. It is a metal screw with a Phillips head and measures 1/4 inch in length. This screw is used to secure the top panel of the appliance to the frame. It is also used to secure the control panel to the frame of the applia...

Whirlpool SHIELD is a refrigerator water filter system designed to reduce contaminants in drinking water. The system is certified to NSF/ANSI Standard 42 and 53 for the reduction of chlorine taste and odor, lead, cysts, turbidity, asbestos, and other contaminants. The system features a high-flow f...