Model: EVM1750SMSS01

A flange nut, also known as a frame nut, is a type of nut that has a wide flange at one end that acts as an integrated washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of...

GE ASM-MAGNETRON - Part# WB27X10880 is a replacement part for GE microwave ovens. It is a magnetron, which is the component of a microwave oven that produces the microwaves used to cook food. The magnetron is a tube-shaped device with an electromagnet at one end and an antenna at the other. When e...

GE ASSY-HOLDER - Part# WB01X10071 is a part used in some GE ovens. It is a holder assembly that is used to secure the bake element to the back wall of the oven. The holder assembly includes two metal brackets and two screws. The holder assembly helps to keep the bake element in place and prevents ...

GE BASE-PLATE - Part# WB56X10212 is a replacement part for GE microwaves. It is a metal base plate that sits at the bottom of the microwave and helps to support the microwave’s internal components. The base plate also helps to protect the interior of the microwave from dust and other debris. This ...

GE BOLT-FLAT - Part# WB01X10180 is a replacement part for GE range ovens. It is a flat head bolt that is used to secure the oven door to the oven frame. The bolt measures 1/4 inch in diameter and 1-1/2 inches in length. It has a zinc plated finish and comes with two nuts and two washers. This part...

The GE Bracket Lamp Part# WB02X11265 is a replacement part for various GE microwave ovens. It is a bracket lamp that is used to hold the light bulb in place in the oven. The bracket lamp is made of metal and has two mounting holes for easy installation. It also includes a wire harness and two scre...

GE Bracket-Air Guide "A" - Part# WB06X10147 is a replacement part for GE microwave ovens. It is a bracket that holds the air guide in place and helps to direct the air flow inside the oven. The bracket is made of metal and has two mounting holes for easy installation. This part is compatible with ...

The GE Bracket-Duct Upper Assy - Part# WB06X10148 is a replacement part for a variety of GE microwave ovens. It is used to secure the upper duct assembly to the top of the microwave oven. The bracket is made of metal and has two mounting holes for attaching it to the top of the oven. It also has t...

GE Bracket-Powe Part# WB06X10122 is a mounting bracket designed for use with select GE microwaves. It is used to secure the microwave to the wall or cabinet. The bracket is made of metal and features two mounting holes for easy installation. It also includes four screws and anchors for added stabi...

The GE Bracket-V/T Motor (Part# WB06X10165) is a direct replacement motor for various GE and Hotpoint range hoods. This motor is designed to provide reliable, quiet operation for your range hood. It features a bracket-style mounting system that allows for easy installation and removal. The motor i...

GE Capacitor Part# WB27X10011 is a replacement part for many GE microwave ovens. It is a dual-run capacitor with two terminals and a common connection. The capacitor helps the motor start and run, and it also helps to improve the efficiency of the motor. The capacitor has a capacitance of 10 MFD (...

GE CAPACITOR-MO Part# WB27X10170 is a replacement part for General Electric microwave ovens. It is a capacitor that helps regulate the electrical current in the oven. The capacitor stores and releases energy as needed to help maintain the correct voltage and current levels in the oven. This part i...

GE COUPLER TT HUB - Part# WB06X10420 is a replacement part for GE microwave ovens. It is a coupler hub that connects the turntable motor to the turntable tray. The coupler hub is made of plastic and has two metal prongs that fit into the slots on the underside of the turntable tray. The hub also h...

GE Cover-Glass Part# WB36X10216 is a replacement part for a variety of GE microwave ovens. It is a glass cover that fits over the top of the microwave oven, protecting the interior from dust and other debris. The cover is made of tempered glass, which is designed to be shatter-resistant and withst...

GE Damper-Cover - Part# WB06X10129 is a replacement part for GE brand range hoods. It is a plastic cover that fits over the damper assembly of the range hood. The damper assembly is responsible for controlling the amount of air that is drawn into the range hood, and this cover helps to protect it ...

The GE General Electric Hotpoint PartsIPS Kenmore Microwave Oven Range Vent Hood Aluminum Grease Filter - Part# WB06X10596 is a replacement filter for your range hood. It is made of aluminum and is designed to trap grease, smoke, and odors from the air in your kitchen. This filter helps keep your ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Microwave Oven Glass Lamp Light Lens Cover - Part# WB36X10071 is a replacement part for a variety of microwave ovens. This part is designed to fit the following models: JVM1790SK01, JVM1790SK02, JVM1790SK03, JVM1790SK04, JVM1790SK05, JVM1790SK0...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Microwave Oven Turntable Drive Motor - Part# WB26X10038 is a replacement part for many GE, RCA, Hotpoint, and PartsIPS Kenmore microwave ovens. This motor is responsible for rotating the turntable inside the microwave oven. It is a 120V AC moto...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven Appliance Light Bulb 40W 130V Intermediate Base - Part# WB36X10003 is a replacement light bulb for range ovens. It is a 40 watt bulb with a 130 volt intermediate base. This light bulb is designed to fit many different brands of range...

GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven Microwave Light Bulb Lamp Holder Socket - Part# WB08X10016 is a replacement part for a range, oven, or microwave. It is a light bulb lamp holder socket that is designed to hold the light bulb in place and provide an electrical connection...

GE Grille Asm - Part# WB07X11150 is a replacement part for a variety of GE ovens. It is the outer grille assembly that fits around the oven door and provides protection from heat and steam. The grille is made of stainless steel and includes mounting screws. This part is compatible with many GE ove...

GE HANDLE ASM SS - Part# WB07X11050 is a stainless steel handle assembly for General Electric (GE) appliances. It is used to replace the existing handle on a range, refrigerator, or other appliance. The part number WB07X11050 is a genuine OEM (Original Equipment Manufacturer) part that is designed...

GE Hardware Installation - Part# WB01X10181 is a hardware installation kit for GE appliances. This kit includes all the necessary hardware and instructions needed to install a new GE appliance. The kit includes screws, nuts, washers, mounting brackets, and other hardware components. It also includ...

GE Holder-Rack-A Part# WB06X10467 is a replacement part for GE microwave ovens. It is a metal rack that fits inside the oven cavity and is used to hold dishes and other items while cooking. The rack has two handles on either side for easy removal and can be adjusted to different heights depending ...

GE Holder-Rack-B Part# WB06X10468 is a replacement part for GE microwave ovens. It is a rack that holds the turntable in place. The rack is made of metal and has four arms that fit into the slots on the bottom of the microwave oven. The arms are adjustable so that the turntable can be positioned a...

The GE Holder-Stirrer (Part# WB06X10286) is a kitchen appliance designed to hold and stir food items while cooking. It is a versatile tool that can be used for a variety of tasks, such as stirring sauces, gravies, and soups; mixing batters; and even blending smoothies. The holder-stirrer features ...

GE Hood Damper Assembly (Part# WB06X10436) is a replacement part for GE range hoods. It is a metal assembly that helps to control the airflow in the range hood. The damper assembly includes a metal frame, two dampers, and two springs. The frame is mounted to the underside of the range hood and the...

GE LATCH-BODY - Part# WB06X10676 is a replacement part for GE microwave ovens. It is the latch body that holds the door closed when the oven is in use. The latch body consists of two parts: the latch and the body. The latch is a metal piece that fits into the body and holds the door closed when it...

The GE Lever Switch - Part# WB06X10128 is a replacement part for a range or oven. It is used to control the temperature of the oven. The switch has two positions, one for "off" and one for "on". When the switch is in the "on" position, it allows electricity to flow through the circuit and power up...

GE Noise Filter ASM - Part# WB02X11200 is a noise filter assembly designed to reduce the amount of electrical noise that can interfere with the operation of other electrical components. It is typically used in refrigerators, dishwashers, and other appliances. The filter consists of two capacitors ...

GE Rack Wire Part# WB48X10053 is a genuine OEM (Original Equipment Manufacturer) replacement part for GE brand microwaves. This part is a wire rack that fits inside the microwave and holds the food items in place while they are being cooked. The rack is made of durable metal and is designed to las...

GE SCREW-WASHER - Part# WB01X10084 is a replacement part for GE appliances. It is a small metal washer with a hole in the center that is used to secure screws and other fasteners. The washer has a slightly larger diameter than the screw head, which helps to distribute the load of the fastener over...

The GE Smart Board, Part# WB27X10935, is a replacement part for select GE ovens. It is a control board that allows you to control the oven’s temperature and other settings. The board is designed to be easy to install and comes with instructions for installation. It also includes a wiring diagram f...

GE STIRRER ASSY - Part# WB06X10416 is a replacement part for GE microwaves. It is a metal stirrer assembly that helps to evenly distribute heat throughout the microwave cavity. The stirrer assembly consists of a motor, fan blade, and mounting bracket. The motor is responsible for spinning the fan ...

GE STIRRER MOTO - Part# WB26X10037 is a replacement motor for GE microwaves. It is used to stir the food in the microwave to ensure even cooking. The motor is designed to fit into a variety of GE microwaves and has a part number of WB26X10037. The motor is made from durable materials and has been ...

GE Thermostat Part# WB27X10194 is a thermostat designed for use with GE electric ovens. It is a temperature control device that regulates the temperature of the oven by sensing the temperature inside the oven and turning on or off the heating elements as needed. The thermostat is adjustable and ca...

GE Thermostat Part# WB27X10195 is a digital thermostat designed to control the temperature in a home or office. It is a single-stage, non-programmable thermostat that can be used with both heating and cooling systems. The thermostat has an easy-to-read LCD display and simple push button controls f...

GE Thermostat-1 Part# WB27X10166 is a digital thermostat designed to control the temperature in a home or office. It is a single-stage, non-programmable thermostat that can be used with either electric or gas heating systems. The thermostat has an easy-to-read LCD display and features a backlight ...

GE TT SUPPORT ASSY W/ROLLERS - Part# WB06X10139 is a part used in some GE ovens. It is a support assembly with rollers that helps to support the oven door and keep it in place. The part includes two rollers, two brackets, and four screws. The rollers are made of plastic and the brackets are made o...

GE Ventilation Part# WB26X10042 is a replacement part for GE range hoods. It is a fan motor assembly that is used to circulate air in the range hood. The fan motor assembly includes the motor, blower wheel, and mounting bracket. The fan motor assembly helps to move air through the range hood to re...