Model: ESS22XGMCWW

GE 5/16 CNTR UN - Part# WR02X10471 is a part manufactured by General Electric (GE). It is a 5/16 inch center unit, which is used to connect two parts together. This part is typically used in refrigerators and other appliances. It has a threaded connection on one end and a snap-in connection on the...

The GE Board ASM Encoder - Part# WR55X10150 is a part used in many General Electric (GE) refrigerators. It is an electronic control board that monitors and controls the refrigerator's temperature, defrost cycle, and other functions. The encoder is responsible for sending signals to the compressor,...

GE Bracket Evap - Part# WR02X10764 is a replacement part for GE refrigerators. It is a bracket that holds the evaporator fan motor in place. The bracket is made of metal and has two mounting holes for attaching the fan motor. It also has two mounting holes for attaching the evaporator cover. This ...

GE Bucket Ice D - Part# WR30X10017 is a replacement part for GE refrigerator ice makers. It is a plastic bucket that holds the ice cubes produced by the ice maker. The bucket has a handle and a lid to keep the ice cubes fresh and cold. The bucket also has an auger that helps to move the ice cubes ...

The GE Button Slide - Part# WR02X11174 is a replacement part for GE refrigerators. It is a white plastic slide that is used to hold the refrigerator door in place when it is closed. The slide has two tabs on the top and bottom that fit into slots on the refrigerator door, and when the door is clos...

GE Cover Pan Gl - Part# WR32X10130 is a replacement part for GE refrigerators. It is a glass shelf cover that fits over the top of the refrigerator shelves. The part number is WR32X10130 and it is made of glass. This part helps to keep food items from falling off the shelves and keeps them organiz...

GE DART CLIP (Part# WR02X10431) is a part used in some GE refrigerators. It is a plastic clip that is used to secure the defrost heater to the evaporator. The clip helps to keep the heater in place and prevents it from becoming loose or disconnected. The clip also helps to reduce vibration and noi...

GE Door Dairy - Part# WR22X10012 is a refrigerator door dairy bin that is designed to fit most GE and Hotpoint top-freezer refrigerators. It is made of durable plastic and has a clear front so you can easily see what items are stored inside. The bin has an adjustable shelf for easy storage of diff...

GE GASKET PAN C - Part# WR14X10084 is a replacement part for GE refrigerators. It is a gasket that seals the pan on the bottom of the refrigerator. The gasket helps to keep cold air in and warm air out, helping to maintain an even temperature inside the refrigerator. The gasket is made of durable ...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Motor with Thermistor DC - Part# WR60X10074 is a motor that is used in refrigerators to circulate air and help maintain the desired temperature. The motor is powered by direct current (DC) and has a thermistor attached to it...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Water Inlet Fill Valve - Part# WR57X10032 is a replacement part for refrigerators. It is designed to regulate the flow of water into the refrigerator's water reservoir. The valve is connected to the water line and allows water to e...

GE GRILL RECESS - Part# WR17X10712 is a replacement part for a GE refrigerator. It is a plastic grill that fits into the recess of the refrigerator door and helps to keep food items from falling out when the door is opened. The grill also helps to keep the temperature inside the refrigerator consi...

The GE Grommet Fan Motor (Part# WR02X10520) is a replacement part for many GE refrigerators. It is a motor that is used to circulate air inside the refrigerator and freezer compartments. The motor is mounted on the back wall of the refrigerator and has two wires that connect to the control board. ...

GE HANDLE PAN VEG - Part# WR17X11139 is a replacement handle for a vegetable pan. It is designed to fit GE brand refrigerators and is made of durable plastic. The handle measures approximately 8 inches long and 1.5 inches wide. It has a white finish and features a textured grip for easy handling. ...

GE Handle SXS (Part# WR12X10332) is a replacement handle for GE side-by-side refrigerators. It is made of durable plastic and comes in a white finish. The handle measures approximately 11 inches long and 1.5 inches wide. It has two mounting holes on the back for easy installation. This handle is d...

GE Handle Tail - Part# WR12X10106 is a replacement part for GE refrigerators. It is a handle tail that attaches to the refrigerator door handle and provides a secure connection between the handle and the door. The part is made of durable plastic and is designed to fit most GE refrigerator models. ...

GE Harness LT & SW - Part# WR23X10245 is a wiring harness assembly for General Electric (GE) refrigerators. It is used to connect the refrigerator's light and switch components to the main power supply. The harness includes two leads, one for the light and one for the switch, as well as a ground w...

GE Housing Shield Dispenser (Part# WR17X11170) is a replacement part for General Electric refrigerators. It is a plastic housing that holds the water filter and dispenses water from the refrigerator. The part includes the housing, mounting bracket, and screws. This part helps to keep the water fil...

GE Im Guardrail Part# WR29X10054 is a safety guardrail designed to protect people from falling off of balconies, decks, and other elevated surfaces. The guardrail is made of durable steel and features a powder-coated finish for added protection against the elements. It has a maximum height of 42 i...

GE NUT J - Part# WR01X10190 is a part manufactured by General Electric (GE). It is a plastic nut used to secure the door handle on some GE refrigerators. The nut is made of durable plastic and has a diameter of 1/4 inch. It has an internal thread that fits onto the door handle and is secured with ...

The GE Reflector Lamp Part# WR02X10578 is a replacement part for a variety of GE appliances. It is a 120-volt, 20-watt reflector lamp that is used to provide light in microwaves, ovens, and other appliances. The lamp has an average life of 2,000 hours and features a medium base for easy installati...

GE Screw 8-18 Hid02 - Part# WR01X10196 is a type of screw manufactured by General Electric. It is an 8-18 thread size, hex head, and has a length of 0.375 inches. The part number WR01X10196 is used to identify the specific screw in the GE catalog. This screw is typically used to secure parts toget...

The GE Shelf Module - Part# WR71X10232 is a replacement shelf for a variety of GE refrigerators. This shelf is made of durable plastic and is designed to fit perfectly in the refrigerator, providing additional storage space. The shelf can be adjusted to fit different heights and widths, making it ...

GE Shield Light - Part# WR17X10725 is a replacement part for a refrigerator. It is a light shield that is used to protect the light bulb in the refrigerator from dust and other debris. The shield is made of plastic and has two clips on the back that attach it to the refrigerator wall. The shield a...

GE Shield Light FZ is a refrigerator light assembly designed for use with GE refrigerators. It is part number WR17X10765 and is a genuine OEM (Original Equipment Manufacturer) part. The light assembly includes the bulb, socket, and shield. The shield helps to protect the bulb from damage and also ...

GE SNUGGER MODU (Part# WR02X10582) is a motorized fan assembly designed to provide air circulation in refrigerators and freezers. It is designed to fit into the top of the refrigerator or freezer and circulate air throughout the interior. The fan is powered by a 12V DC motor and is equipped with a...

GE Socket & Terminal - Part# WR02X10591 is a replacement part for a variety of GE appliances. It is a two-wire socket and terminal assembly that includes two female terminals and one male terminal. The terminals are designed to accept 18-22 gauge wire and are rated for up to 20 amps. This part is ...

The PIN HINGE BTM ADJ - Part# WR02X10592 is a part used in refrigerators and other appliances. It is a pin hinge bottom adjustment that is used to adjust the bottom of the refrigerator door. This part is made of plastic and metal and is designed to fit most refrigerator models. The pin hinge botto...