Model: EGR2001EN2SS

GE Bottom Oven Part# WB35K10035 is a replacement part for General Electric ovens. It is a genuine OEM part and is designed to fit various models of GE ovens. This bottom oven is made of durable metal and features a black finish. It has two adjustable racks, one for baking and one for broiling. The...

GE BUMPER - Part# WB02K10178 is a replacement part for General Electric (GE) range and ovens. It is a black plastic bumper that fits around the oven door to protect it from damage when closing the door. The bumper helps to keep the door from slamming shut and also helps to reduce noise when closin...

The GE Burner 12K (Part# WB16T10046) is a replacement burner for select GE gas ranges. It is designed to provide an even heat distribution and reliable performance. The burner has a 12,000 BTU output and features a durable cast iron construction with a porcelain enamel finish. The burner also incl...

The GE Burner Medium (9500) Part# WB16K10055 is a replacement burner for select GE gas ranges. It is designed to fit into the existing range top and provide a medium-sized flame for cooking. The burner has a 9500 BTU rating and is made of durable stainless steel. It also features an adjustable air...

GE CAP END LF - Part# WB07K10263 is a replacement part for a range hood. It is the left side cap end for a GE range hood. This part is made of plastic and is used to cover the left side of the range hood. It helps to keep out dust and debris from entering the range hood, as well as providing an ae...

GE CAP END RT - Part# WB07K10262 is a replacement part for a range top. It is a cap end for the right side of the range top. This part is made of metal and is used to cover the end of the range top, providing a finished look. It also helps to protect the range top from dirt and debris. This part f...

The GE CAP-BURNER L - Part# WB29K10006 is a replacement burner cap for a GE range. It is designed to fit the following models: JGP329, JGP333, JGP633, and JGBP87. This part is made of durable metal and has a black finish. It measures 4-1/2 inches in diameter and has four mounting holes for easy in...

The GE CAP-BURNER M is a replacement part for GE gas ranges. It is a burner cap that fits over the burner head to help protect it from dirt and debris. The part number WB29K10001 is specific to certain models of GE gas ranges. The cap is made of durable metal and has a black finish. It measures ap...

The GE CAP-BURNER S (Part# WB29K10009) is a replacement burner cap for GE gas ranges. It is designed to fit specific models of GE gas ranges and is made of durable metal. The cap helps to evenly distribute the heat from the burner and prevents food from sticking to the surface. It also helps to ke...

GE Cleaner-SS is a stainless steel cleaner and polish designed to help keep your stainless steel appliances looking like new. It is formulated to remove fingerprints, smudges, and other residue from stainless steel surfaces. The product also helps protect against corrosion and tarnishing. Part# WB...

GE DEFLECTOR-BR - Part# WB49K10003 is a replacement part for GE ovens. It is a broil element deflector that helps to evenly distribute heat when broiling. The deflector is made of metal and has a black finish. It measures approximately 10 inches by 6 inches and has two mounting holes on the back. ...

GE Drawer Support Part# WB02K10158 is a replacement part for GE brand ovens. It is a metal support bracket that attaches to the oven drawer and helps to keep it in place. The part is made of durable metal and comes with mounting hardware for easy installation. This part is compatible with many GE ...

GE Economic Nut Part# WB01K10037 is a high-quality, economical nut designed for use in a variety of applications. It is made from steel and features a zinc plating for corrosion resistance. The nut has a coarse thread and is designed to be used with Grade 5 or 8 bolts. It has an outside diameter o...

GE ELBOW HI BROIL - Part# WB28K10310 is a replacement part for General Electric (GE) ovens. It is a metal elbow-shaped piece that connects the broil element to the oven's back wall. The part is used to provide an electrical connection between the broil element and the oven's wiring. This part is m...

GE END SUPPORT LF - Part# WB07K10261 is a part used in GE ovens. It is an end support bracket that is used to secure the oven door to the oven frame. The part is made of metal and has two mounting holes for attaching it to the oven frame. It also has two tabs that fit into slots on the oven door, ...

The GE Front Orifice Holder (Part# WB28K10189) is a replacement part for a gas range. It is used to hold the orifice in place and secure it to the burner. The orifice holder is made of metal and has a threaded hole in the center for attaching the orifice. It also has two tabs on either side that a...

GE GASKET ASM DOOR - Part# WB04K10022 is a replacement part for General Electric (GE) ovens. It is a gasket assembly that seals the door of the oven. The gasket is made of durable rubber and helps to keep heat and moisture inside the oven, while preventing any air from escaping. This part helps to...

GE GASKET FRONT FRAME - Part# WB04K10021 is a replacement part for GE brand ovens. It is a gasket that seals the front frame of the oven to the oven cavity. The gasket helps to keep heat and smoke from escaping the oven cavity, and also helps to keep moisture out of the oven cavity. This part is m...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Cooktop Top Burner Spark Igniter Electrode - Part# WB13K10014 is a replacement part for a range, stove, cooktop, or oven. It is an igniter electrode that produces a spark to ignite the gas when the burner knob is turned on. The spark ig...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop WIRE HARNESS - Part# WB18K10035 is a replacement part for the stove range oven cooktop. It is a wire harness that connects the various components of the appliance to each other and to the power source. The harness includes ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven Burner Bar with Igniter - Part# WB16K10035 is a replacement part for gas ovens. It is a burner bar that has an igniter attached to it. The igniter is used to ignite the gas in the oven when it is turned on. The burner bar is made of ...

GE Glider Drawer Left - Part# WB02K10060 is a replacement part for GE ovens. It is a left-side drawer glider that helps to smoothly open and close the oven door. The part is made of durable plastic and features a smooth gliding action that allows for easy access to the oven interior. The part is d...

GE LATCH ASSEMBLY - Part# WB02K10141 is a replacement part for GE ovens. It is used to secure the oven door in place when it is closed. The latch assembly consists of two parts: the latch and the strike plate. The latch is a metal piece that attaches to the oven door and has a spring-loaded mechan...

GE LEG LEVELER - Part# WB02K10182 is a part used to level the legs of a GE range or cooktop. It is designed to help ensure that the appliance is level and stable on uneven surfaces. The leg leveler consists of two parts: a threaded stem and a plastic base. The threaded stem screws into the bottom ...

GE ORIFICE-LP L Part# WB28K10023 is a replacement part for a gas range. It is an orifice that regulates the flow of gas to the burner. The orifice is made of brass and has a male 3/8" thread. It is used to control the amount of gas that flows to the burner, allowing for precise temperature control...

GE ORIFICE-LP R - Part# WB28K10031 is a replacement part for a gas range. It is an orifice assembly that is used to regulate the flow of gas to the burners on the range. The orifice assembly consists of a brass body with a stainless steel sleeve and a removable cap. The orifice has two ports, one ...

GE ORIFICE-LP R - Part# WB28K10032 is a replacement part for a gas range. It is an orifice assembly that controls the flow of gas to the burners. The orifice is a small hole that allows the correct amount of gas to flow through it. This part is made of metal and has a threaded end for easy install...

GE Panel Side BK - Part# WB63K10119 is a replacement part for a range or oven. It is the side panel that fits on the right side of the range or oven. It is made of black plastic and measures approximately 20 inches wide by 8 inches high. The part number WB63K10119 is used to identify this specific...

GE Rear Orifice HR 150N 9500 Part# WB28K10188 is a part for a gas range. It is a rear orifice, which is the part of the gas range that connects the gas line to the burner. This particular part is designed for use with GE's HR 150N 9500 series of gas ranges. It has a maximum BTU rating of 150,000 B...

The GE Rear Orifice Holder (Part# WB28K10187) is a part used in gas ranges and cooktops. It is a metal bracket that holds the orifice, which is the small opening that controls the flow of gas to the burner. The orifice holder is located at the back of the range or cooktop and is secured with screw...

GE Receptacle Push-In Part# WB08T10026 is a push-in receptacle designed for use with GE lighting fixtures. It is a single-pole, three-wire receptacle that is UL listed and CSA certified. The receptacle features a spring-loaded, self-aligning design that allows for easy installation and removal of ...

A GE rotary switch is a type of electrical switch that uses a rotating contact arm to control the flow of electricity. The switch is typically used to control the power supply to an appliance or device. The GE rotary switch Part# WB24K10042 is a single-pole, double-throw (SPDT) switch with three t...

GE SCR 10-32 TT PNT 2.05 - Part# WB01K10074 is a range surface element manufactured by General Electric. It is a 10-inch, two-turn, surface element with a power rating of 2.05 kW (2,050 watts). This element is designed to fit most GE and Hotpoint electric ranges and cooktops. It has a 10-32 thread...

GE SCREW - Part# WB01K10043 is a replacement part for GE appliances. It is a screw that is used to secure the top panel of the appliance to the frame. The screw measures approximately 1/4 inch in diameter and is made of metal. It has a Phillips head and comes with a black finish. This part is comp...

GE SCREW - Part# WB01K10070 is a genuine OEM (Original Equipment Manufacturer) part manufactured by GE. It is a mounting screw used to secure the oven door hinge to the oven frame. The screw is made of metal and has a Phillips head for easy installation. It measures approximately 1/2 inch in lengt...

GE SCREW - Part# WB01K10091 is a genuine OEM (Original Equipment Manufacturer) part that is used in various GE appliances. It is a self-tapping screw that is used to secure the door panels on GE ovens, ranges, and cooktops. The screw has a Phillips head and measures approximately 1/2 inch in lengt...

GE SCREW 10-32 HXW 9/16 DWR - Part# WB01K10047 is a screw manufactured by General Electric. It is a 10-32 thread size, hex washer head type, and 9/16 inch diameter. The screw is designed for use in dryers and other appliances. It is made of steel and has a zinc plated finish for corrosion resistan...

GE SCREW 8-18 AB HXW 5/8 S - Part# WB01T10016 is a self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. The screw has an 8-18 thread size, an AB head style, and a 5/8 inch length. It is designed for use in wood and metal applications. The part numb...

GE SCREW 8-32 - Part# WB01K10002 is a self-tapping screw used to secure various parts of a GE appliance. It is made of steel and has a zinc plated finish for corrosion resistance. The screw has an 8-32 thread size and is 1/2 inch long. It is designed to be used with a #2 Phillips head screwdriver....

GE SCREW MTG CK - Part# WB01K10008 is a mounting clip manufactured by General Electric. It is used to secure the mounting of various components in an appliance, such as a refrigerator, dishwasher, or range. The clip is made of plastic and has two holes for screws to secure it in place. The clip is...

The GE Screw Thermostat (Part# WB01K10080) is a thermostat designed to control the temperature of an appliance. It is a single-pole, double-throw (SPDT) switch that can be used to control the temperature of a range, oven, or other appliance. The thermostat has two terminals, one for the power supp...

GE SPACER - Part# WB02K10161 is a replacement part for a range or oven. It is a black plastic spacer that fits between the oven door and the frame of the oven. The spacer helps to keep the door in place and prevents it from rattling or moving around when the oven is in use. It also helps to provid...

The GE SPARK MODULE 4+0 Part# WB13K10029 is a four-burner spark module designed for use with GE gas ranges. This module is used to ignite the gas burners on the range and includes four spark electrodes and a spark generator. The spark generator produces a high voltage electrical current that is se...

The GE Temperature Sensor Part# WB20K10015 is a temperature sensing device designed to detect and measure the temperature of air, liquids, and surfaces. It is typically used in HVAC systems to monitor and control the temperature of a room or area. The sensor has a range of -40°F to 140°F (-40°C to...

GE Tube Burner Supply - Part# WB28K10168 is a replacement part for GE gas ranges. It is a metal tube that supplies the gas to the burner. The tube has a threaded end that connects to the gas valve and a flared end that connects to the burner. This part is used to replace worn or damaged burner sup...

The GE Valve Burner 270 (Part# WB21K10099) is a replacement part for gas ranges. It is designed to replace the existing valve burner on a range and provide an improved cooking experience. The valve burner is made of durable stainless steel and features a 270-degree rotation for maximum heat distri...

The GE Valve Burner 270 Part# WB21K10100 is a replacement part for GE gas ranges. It is a gas valve and burner assembly that is used to control the flow of gas to the burners on the range. The valve has two settings, high and low, which allow you to adjust the flame size. The burner has a 270 degr...