Model: EGR2000EM1CC

GE Bottom Oven Part# WB35K10035 is a replacement part for General Electric ovens. It is a genuine OEM part and is designed to fit various models of GE ovens. This bottom oven is made of durable metal and features a black finish. It has two adjustable racks, one for baking and one for broiling. The...

The GE Burner 12K (Part# WB16T10046) is a replacement burner for select GE gas ranges. It is designed to provide an even heat distribution and reliable performance. The burner has a 12,000 BTU output and features a durable cast iron construction with a porcelain enamel finish. The burner also incl...

The GE Burner Medium (9500) Part# WB16K10055 is a replacement burner for select GE gas ranges. It is designed to fit into the existing range top and provide a medium-sized flame for cooking. The burner has a 9500 BTU rating and is made of durable stainless steel. It also features an adjustable air...

The GE CAP-BURNER L - Part# WB29K10008 is a replacement burner cap for GE gas ranges. It is designed to fit specific models of GE gas ranges and cooktops. The cap is made of durable stainless steel and features a large diameter that allows for better heat distribution. The cap also has a built-in ...

The GE CAP-BURNER M - Part# WB29K10005 is a replacement burner cap for GE gas ranges. It is designed to fit on the top of the burner and provide a secure seal between the burner and the cooktop. The cap is made of durable stainless steel and features a round shape with four notches for easy instal...

GE COOKTOP (WH) - Part# WB62K10048 is a white electric cooktop from General Electric. It is a 30-inch wide cooktop with four burners and a warming zone. The cooktop has two 6-inch and two 8-inch burners, each with its own power level. The warming zone is located in the center of the cooktop and ca...

GE DEFLECTOR-BR - Part# WB49K10003 is a replacement part for GE ovens. It is a broil element deflector that helps to evenly distribute heat when broiling. The deflector is made of metal and has a black finish. It measures approximately 10 inches by 6 inches and has two mounting holes on the back. ...

GE Drawer Support Part# WB02K10158 is a replacement part for GE brand ovens. It is a metal support bracket that attaches to the oven drawer and helps to keep it in place. The part is made of durable metal and comes with mounting hardware for easy installation. This part is compatible with many GE ...

GE Economic Nut Part# WB01K10037 is a high-quality, economical nut designed for use in a variety of applications. It is made from steel and features a zinc plating for corrosion resistance. The nut has a coarse thread and is designed to be used with Grade 5 or 8 bolts. It has an outside diameter o...

GE ELBOW HI BROIL - Part# WB28K10310 is a replacement part for General Electric (GE) ovens. It is a metal elbow-shaped piece that connects the broil element to the oven's back wall. The part is used to provide an electrical connection between the broil element and the oven's wiring. This part is m...

GE Foot Leveling is a part designed to help level the feet of a GE refrigerator. The part number WB02X10521 is used for the GE Profile, GE Cafe, and GE Artistry series refrigerators. This part helps to ensure that the refrigerator is level and stable on any surface. It includes four adjustable fee...

The GE Front Orifice Holder (Part# WB28K10189) is a replacement part for a gas range. It is used to hold the orifice in place and secure it to the burner. The orifice holder is made of metal and has a threaded hole in the center for attaching the orifice. It also has two tabs on either side that a...

GE GASKET ASM. DOOR - Part# WB04K10013 is a replacement part for a General Electric (GE) oven door. It is a rubber gasket that fits around the perimeter of the oven door and helps to create an airtight seal when the door is closed. This helps to keep heat and moisture inside the oven, which improv...

GE GASKET FRONT FRAME - Part# WB04K10021 is a replacement part for GE brand ovens. It is a gasket that seals the front frame of the oven to the oven cavity. The gasket helps to keep heat and smoke from escaping the oven cavity, and also helps to keep moisture out of the oven cavity. This part is m...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Cooktop Top Burner Spark Igniter Electrode - Part# WB13K10014 is a replacement part for a range, stove, cooktop, or oven. It is an igniter electrode that produces a spark to ignite the gas when the burner knob is turned on. The spark ig...

GE Glider Drawer Left - Part# WB02K10060 is a replacement part for GE ovens. It is a left-side drawer glider that helps to smoothly open and close the oven door. The part is made of durable plastic and features a smooth gliding action that allows for easy access to the oven interior. The part is d...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE ORIFICE-LP L Part# WB28K10023 is a replacement part for a gas range. It is an orifice that regulates the flow of gas to the burner. The orifice is made of brass and has a male 3/8" thread. It is used to control the amount of gas that flows to the burner, allowing for precise temperature control...

GE ORIFICE-LP R - Part# WB28K10031 is a replacement part for a gas range. It is an orifice assembly that is used to regulate the flow of gas to the burners on the range. The orifice assembly consists of a brass body with a stainless steel sleeve and a removable cap. The orifice has two ports, one ...

GE ORIFICE-LP R - Part# WB28K10032 is a replacement part for a gas range. It is an orifice assembly that controls the flow of gas to the burners. The orifice is a small hole that allows the correct amount of gas to flow through it. This part is made of metal and has a threaded end for easy install...

GE Rear Orifice HR 150N 9500 Part# WB28K10188 is a part for a gas range. It is a rear orifice, which is the part of the gas range that connects the gas line to the burner. This particular part is designed for use with GE's HR 150N 9500 series of gas ranges. It has a maximum BTU rating of 150,000 B...

The GE Rear Orifice Holder (Part# WB28K10187) is a part used in gas ranges and cooktops. It is a metal bracket that holds the orifice, which is the small opening that controls the flow of gas to the burner. The orifice holder is located at the back of the range or cooktop and is secured with screw...

GE Receptacle P - Part# WB08T10004 is a 4-wire, 125/250V, 15A receptacle. It is designed to be used in residential and commercial applications. The receptacle features a durable construction with an impact-resistant thermoplastic body and terminal screws that are backed out for easy wiring. It als...

A GE rotary switch is a type of electrical switch that uses a rotating contact arm to control the flow of electricity. The switch is typically used to control the power supply to an appliance or device. The GE rotary switch Part# WB24K10042 is a single-pole, double-throw (SPDT) switch with three t...

GE SCR 10-16PL PNT 2.22S - Part# WB01K10073 is a range surface element switch manufactured by General Electric. It is a single pole, double throw (SPDT) switch with a 10-16 amp rating and a 2.22 inch diameter mounting hole. The switch has two positions, one for the "on" position and one for the "o...

GE SCREW - Part# WB01K10043 is a replacement part for GE appliances. It is a screw that is used to secure the top panel of the appliance to the frame. The screw measures approximately 1/4 inch in diameter and is made of metal. It has a Phillips head and comes with a black finish. This part is comp...

GE SCREW 8-18 AB HXW 5/8 S - Part# WB01T10016 is a self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. The screw has an 8-18 thread size, an AB head style, and a 5/8 inch length. It is designed for use in wood and metal applications. The part numb...

GE SCREW 8-22 PL 1HX 71 - Part# WB01K10012 is a part manufactured by General Electric. It is a self-tapping screw made of steel and has a Phillips head. The screw has an 8-22 thread size, meaning that it has 8 threads per inch and the major diameter of the thread is 22mm. The “PL” in the part numb...

GE SCREW 8-32 - Part# WB01K10002 is a self-tapping screw used to secure various parts of a GE appliance. It is made of steel and has a zinc plated finish for corrosion resistance. The screw has an 8-32 thread size and is 1/2 inch long. It is designed to be used with a #2 Phillips head screwdriver....

GE SCREW MTG CK - Part# WB01K10008 is a mounting clip manufactured by General Electric. It is used to secure the mounting of various components in an appliance, such as a refrigerator, dishwasher, or range. The clip is made of plastic and has two holes for screws to secure it in place. The clip is...

GE SCREW MTG END CAP (BISQUE) - Part# WB01K10024 is a part used in GE appliances. It is an end cap for mounting screws and is made of bisque-colored plastic. The end cap helps to secure the screws in place and prevents them from loosening or coming out. It also helps to protect the surrounding are...

The GE SPARK MODULE 4+0 Part# WB13K10018 is a replacement part for the GE range and oven. It is a spark module that controls the spark ignition system on the range or oven. The spark module has four terminals and four wires that connect to the spark igniter, safety valve, and gas valve. The spark ...

The GE Temperature Sensor Part# WB20K10015 is a temperature sensing device designed to detect and measure the temperature of air, liquids, and surfaces. It is typically used in HVAC systems to monitor and control the temperature of a room or area. The sensor has a range of -40°F to 140°F (-40°C to...

GE TRIM BOTTOM ASM - Part# WB07K10269 is a part used in some GE ovens. It is a trim piece that goes along the bottom of the oven door. It is made of stainless steel and has a brushed finish. The trim piece helps to give the oven door a finished look and also helps to protect the door from damage. ...

GE Tube Burner Supply - Part# WB28K10168 is a replacement part for GE gas ranges. It is a metal tube that supplies the gas to the burner. The tube has a threaded end that connects to the gas valve and a flared end that connects to the burner. This part is used to replace worn or damaged burner sup...