Model: DW80F600UTSAA

ASSY DUCT - Part# DD82-01100A is an assembly duct part used in Samsung dryers. It is a plastic duct that connects the blower fan to the exhaust vent. It helps to direct air from the blower fan to the exhaust vent, allowing air to be expelled from the dryer. The part number DD82-01100A is specific ...

ASSY SENSOR LEAK - Part# DD94-01062A is a part used in Samsung washing machines. It is an assembly that includes a leak sensor, which is used to detect water leaks in the washing machine. The leak sensor is connected to the main control board and sends a signal when it detects water. This signal t...

ASSY-CASE VENT - Part# DD94-01045A is a part used in Samsung dryers. It is a vent assembly that is located on the back of the dryer and helps to exhaust hot air from the dryer during the drying cycle. The vent assembly includes a vent cover, a fan blade, and a motor. The fan blade helps to draw ai...

ASSY-DRY DUCT - Part# DD94-01030A is a dryer duct assembly used in Samsung dryers. It is made of metal and includes the vent hood, clamps, and screws. The vent hood is designed to direct air from the dryer to the outside of the home. The clamps are used to secure the duct to the back of the dryer ...

A clamper hose, also known as a dust collection hose, is a flexible hose used to collect dust and other particles from a variety of sources. It is typically made of a durable material such as rubber or plastic and is designed to be flexible enough to fit into tight spaces. The clamps on the ends o...

Cover-Power Cord Part# DD63-00082A is a replacement part for Samsung dryers. It is a plastic cover that fits over the power cord to protect it from damage. The cover is designed to fit snugly over the power cord and keep it safe from dirt, dust, and other debris. It also helps to prevent accidenta...

The D/W Install Kit - Part# DD94-01002A is a complete installation kit for dishwashers. It includes all the necessary components to install a dishwasher in a kitchen. The kit includes a mounting bracket, screws, washers, nuts, and other hardware needed to secure the dishwasher to the countertop or...

The D/W SUMP & MOTOR ASSY - Part# DD82-01126B is a part used in dishwashers. It is the assembly that houses the motor and pump for the dishwasher. The sump is the part of the dishwasher that collects water and debris from the dishes before it is pumped out of the dishwasher. The motor is responsib...

A door lock switch, also known as a door lock actuator, is an electrical component that is used to control the locking and unlocking of a vehicle's doors. The switch is typically located on the interior of the vehicle, near the door handle or window switch. It is connected to the vehicle's central...

DOOR-LINK(L) - Part# DD64-00047A is a door lock actuator assembly for Samsung refrigerators. It is used to replace the existing door lock actuator on Samsung refrigerators. The DOOR-LINK(L) is designed to fit a variety of Samsung refrigerator models and features a two-wire connection for easy inst...

DOOR-LINK(R) - Part# DD64-00046A is a door opener system designed to provide secure access control for residential and commercial applications. It is a wireless system that can be used to open and close doors remotely, allowing users to control access to their property from anywhere in the world. ...

Gasket-Brake Part# DD63-00072A is a replacement part for a variety of brake systems. It is designed to provide a seal between the brake caliper and the brake rotor, preventing dirt, dust, and other debris from entering the system. The gasket is made of durable rubber material that can withstand hi...

The GUIDE-DOOR LINK - Part# DD61-00207A is a part used in Samsung washing machines. It is a metal link that connects the door to the guide rail on the front of the machine. This part helps to keep the door in place and ensure that it opens and closes properly. The link also helps to reduce vibrati...

GUIDE-TUB EDGE(L) - Part# DD61-00178A is a part used in Samsung washing machines. It is a left side guide tub edge that helps to keep the tub from moving around during the wash cycle. The guide tub edge is made of plastic and attaches to the inner wall of the washer tub. It helps to keep the tub i...

HEATER - Part# DD47-00008A is a replacement part for Samsung dryers. It is a heating element that is used to generate heat in the dryer. The heating element consists of a coiled wire that is surrounded by a metal housing. When electricity passes through the coiled wire, it generates heat which is ...

HOLDER-SUMP is a part number DD61-00212A manufactured by Samsung. It is a part of the dishwasher assembly and is used to hold the sump in place. The sump is the part of the dishwasher that collects water and debris from the dishes before it is drained away. The HOLDER-SUMP holds the sump in place ...

MAIN PCB ASSY. - Part# DD82-01139B is a printed circuit board assembly (PCBA) used in Samsung washing machines. It is the main control board for the machine and is responsible for controlling all of the functions of the washer, including water level, temperature, spin speed, and cycle selection. T...

Roller Basket (L) - Part# DD66-00023A is a laundry basket with four casters that make it easy to move around. It is made of durable plastic and has a large capacity of up to 50 liters. The basket has two handles on the sides for easy carrying and a lid that can be opened and closed with ease. The ...

Samsung Bracket-Rail - Part# DD97-00116A is a part used in Samsung dishwashers. It is a metal bracket that attaches to the side of the dishwasher and holds the dishrack in place. The bracket is made of stainless steel and has two mounting holes for attaching it to the side of the dishwasher. It al...

Samsung Cap-Tub Spacer - Part# DD67-00040A is a part used in Samsung washing machines. It is a plastic spacer that fits between the tub and the outer drum of the washing machine. The spacer helps to reduce noise and vibration when the washer is running. It also helps to keep the tub from shifting ...

Samsung CASE ASSY - Part# DD82-01373A is a replacement part for Samsung washing machines. It is the outer casing of the washing machine and is made of plastic. It includes the control panel, door, and other components that make up the exterior of the machine. The part number DD82-01373A is specifi...

Samsung Cover-Brake Part# DD63-00073A is a replacement part for Samsung washing machines. It is a plastic cover that fits over the brake assembly on the back of the machine. The cover helps to protect the brake assembly from dust and debris, as well as helping to keep it in place. It also helps to...

Samsung Cover-Guide PCB - Part# DD63-00098A is a part used in Samsung washing machines. It is a printed circuit board (PCB) that serves as a guide for the cover of the washing machine. It helps to keep the cover in place and prevents it from moving or shifting during operation. The PCB also helps ...

The Samsung D/W Chopper Blade - Part# DD70-01003A is a replacement part for Samsung dishwashers. It is a circular blade that chops up food particles and other debris that may be present in the dishwasher. The blade is made of stainless steel and is designed to fit into the bottom of the dishwasher...

The Samsung D/W SUMP CHECK VALVE - Part# DD66-00045A is a part used in dishwashers to prevent water from flowing back into the dishwasher after it has been drained. It is a one-way valve that allows water to flow out of the dishwasher, but not back in. The valve is made of plastic and has two port...

The Samsung Dishwasher Access Panel - Part# DD82-01102B is a replacement part for Samsung dishwashers. It is the panel that covers the front of the dishwasher and provides access to the interior of the appliance. The panel is made of durable plastic and is designed to fit all Samsung dishwashers. ...

The Samsung Dishwasher Leveling Leg - Part# DD61-00232A is a replacement part for Samsung dishwashers. It is used to level the dishwasher and ensure that it is stable and secure. The leveling leg is made of durable plastic and features a threaded design for easy installation. It also has an adjust...

Samsung DUCT-NOZZLE - Part# DD67-00048A is a replacement part for Samsung dryers. It is a nozzle that connects to the dryer's exhaust duct and helps to direct the hot air out of the dryer. The nozzle is made of plastic and has two small holes in it that allow air to pass through. It also has a rub...

Samsung Filter-Circulation Part# DD63-00087A is a replacement filter for Samsung refrigerators. It is designed to reduce the amount of sediment, chlorine, and other contaminants from the water supply. The filter also helps to improve the taste and odor of the water. The filter should be replaced e...

Samsung Holder-Door Lock - Part# DD61-00175A is a replacement part for Samsung dishwashers. It is a metal bracket that holds the door lock assembly in place. The holder is made of durable metal and is designed to last for many years. It comes with all the necessary hardware for installation, inclu...

Samsung HOSE-DRAIN IN - Part# DD81-01502A is a replacement part for Samsung dishwashers. It is a flexible hose that connects the dishwasher drain pump to the sink drain. The hose is made of durable plastic and has a diameter of 3/4 inch. It also includes a clamp to secure it in place. This part is...

Samsung Leg-Adjust Part# DD61-00232B is a part used in Samsung washing machines. It is a metal leg that is adjustable and can be used to level the washing machine. The leg can be adjusted by turning the knob on the top of the leg, which will raise or lower the height of the leg. This allows for ea...

Samsung Nozzle-Middle - Part# DD82-01064A is a replacement part for Samsung dishwashers. It is a plastic nozzle that is located in the middle of the dishwasher and helps to distribute water evenly throughout the dishwasher during the wash cycle. The nozzle has multiple holes that allow water to sp...

Samsung Pump-Circulation Part# DD81-01640A is a part used in Samsung dishwashers. It is a pump that circulates water throughout the dishwasher during the wash cycle. The pump helps to ensure that all dishes are washed evenly and thoroughly. The pump also helps to keep the water temperature consist...

Samsung Roller-Basket Upper - Part# DD66-00022A is a replacement part for Samsung dishwashers. It is the upper roller basket that holds dishes and other items during the washing cycle. The roller basket is made of durable plastic and has four rollers that allow it to move freely in and out of the ...

Samsung Seal-Bracker Rail - Part# DD62-00109A is a part used in Samsung dishwashers. It is a metal bracket that helps to secure the seal around the door of the dishwasher. The seal helps to keep water from leaking out of the dishwasher when it is in use. The bracket also helps to keep the seal in ...

Samsung SEAL-DUCT NOZZLE - Part# DD62-00068A is a replacement part for Samsung dishwashers. It is a nozzle that is used to seal the ducts of the dishwasher. The nozzle helps to prevent water from leaking out of the dishwasher. It is made of durable plastic and has a white finish. The nozzle fits i...

Samsung SEAL-FAN (Part# DD62-00044A) is a fan assembly designed for use in Samsung refrigerators. It is responsible for circulating air throughout the refrigerator and freezer compartments to ensure even cooling. The fan assembly consists of a motor, fan blade, and housing. The motor is powered by...

The Samsung PartsIPS Kenmore Dishwasher Drain Pump (Part# DD31-00005A) is a replacement part for Samsung, PartsIPS, and Kenmore dishwashers. It is designed to pump water out of the dishwasher during the drain cycle. The pump is powered by an electric motor and uses a set of impellers to create suc...

The Samsung PartsIPS Kenmore Dishwasher Installation Bracket (Part# DD61-00176A) is a mounting bracket designed to secure the dishwasher to the countertop. It is made of durable metal and comes with all the necessary hardware for installation. The bracket is designed to fit most standard dishwashe...

The Samsung PartsIPS Kenmore Dishwasher RINSE AID DISPENSER - Part# DD59-01001A is a replacement part for dishwashers. It is designed to dispense rinse aid, which helps to reduce water spots and improve drying performance. The dispenser is made of durable plastic and includes a cap and seal to pre...

The Samsung PartsIPS Kenmore Dishwasher Roller Holder, Part# DD61-00222A, is a replacement part for Samsung dishwashers. It is used to hold the rollers in place and ensure that the dishwasher runs smoothly. The roller holder is made of durable plastic and features two mounting holes for easy insta...

The Samsung PartsIPS Kenmore Dishwasher Water Inlet Fill Valve (Part# DD62-00084A) is a replacement part for Samsung, PartsIPS, and Kenmore dishwashers. This valve is responsible for controlling the flow of water into the dishwasher. It is located at the back of the dishwasher and connects to the ...

Samsung Stopper-Rail Part# DD61-00182A is a replacement part for Samsung dishwashers. It is a plastic rail that helps to keep the dishwasher door closed during operation. The stopper rail is located on the bottom of the dishwasher door and helps to prevent the door from opening during operation. I...

SEAL-OIL Part# DD62-00053A is a replacement oil seal for Samsung washing machines. It is used to prevent water from leaking out of the washing machine. The seal is made of high-quality rubber and is designed to fit perfectly into the machine's housing. It also helps to reduce noise and vibration d...

SEAL-SUMP Part# DD62-00050A is a sump seal manufactured by Samsung. It is designed to provide a watertight seal between the sump and the washing machine tub. The seal is made of a durable rubber material that is resistant to wear and tear, and it helps to prevent water from leaking out of the wash...

SEAL-TUB FRONT - Part# DD62-00043A is a replacement part for Samsung washing machines. It is a rubber seal that fits around the front of the washing machine tub. This seal helps to keep water from leaking out of the tub and onto the floor. It also helps to reduce noise and vibration from the spinn...

Spring ETC (Electronic Throttle Control) is a technology used in modern vehicles to control the throttle position of the engine. It is an electronic system that replaces the traditional mechanical throttle linkage and allows for precise control of the engine's power output. The system uses sensors...

A thermistor is a type of resistor whose resistance is dependent on temperature. The part number DD32-00005A is a specific type of thermistor manufactured by Panasonic. It is a negative temperature coefficient (NTC) thermistor, meaning that its resistance decreases as the temperature increases. Th...

A turbidity sensor, part# DD32-00003A, is a device used to measure the amount of suspended particles in a liquid. It works by measuring the amount of light that is scattered when a beam of light passes through the liquid. The more particles present in the liquid, the more light that is scattered a...