Model: DV330AGWXAA

The ASSY CASE FILTER - Part# DC97-16013A is a replacement filter for Samsung washing machines. It is designed to trap lint, dirt, and other debris from the water used in the washing machine. The filter is located inside the washer's tub and should be replaced every 6 months or when it becomes clog...

The Assy Holder Lever - Part# DC97-07510B is a part used in Samsung washing machines. It is a replacement part for the holder lever assembly and is used to secure the detergent drawer in place. The holder lever assembly consists of two parts: the holder lever and the holder lever spring. The holde...

CASE-FILTER - Part# DC61-02613A is a filter used in Samsung washing machines. It is a plastic filter that helps to remove lint, dirt, and other debris from the water before it enters the washing machine. The filter is located at the back of the washer and should be checked and cleaned regularly to...

DOOR-S/W (Door Switch) Part# DC64-00828A is a door switch used in Samsung washing machines. It is a safety device that detects if the door of the washing machine is open or closed. When the door is open, it will prevent the machine from operating and will also alert the user with an audible alarm....

LEVER-DOOR Part# DC66-00395A is a replacement part for Samsung refrigerators. It is a door lever that attaches to the refrigerator door and allows the user to open and close the door with ease. The lever is made of durable plastic and is designed to fit all Samsung refrigerator models. It features...

Samsung Assy Motor Parts DC93-00634A is a replacement part for Samsung washing machines. It is a direct drive motor assembly that includes the motor, pulley, and belt. This part is used to replace worn or damaged motors in Samsung washing machines. The DC93-00634A motor assembly is designed to pro...

The Samsung DRYER DRUM ASSY (LP) - Part# DC97-14849A is a replacement part for Samsung dryers. It is the drum assembly, which includes the drum, bearing, belt, and motor. The drum is the cylindrical container that holds the clothes during the drying cycle. The bearing supports the drum and allows ...

The Samsung DRYER MOTOR CLAMP - Part# DC61-04225A is a genuine OEM replacement part for Samsung dryers. It is used to secure the motor to the dryer cabinet. This clamp is made of metal and has two holes for mounting screws. It is designed to fit specific Samsung dryer models and replaces part numb...

The Samsung Dryer Thermostat Assembly DC47-00016A is a replacement part for Samsung dryers. It is designed to regulate the temperature of the dryer and ensure that it runs at the correct temperature. The thermostat assembly includes a thermostat, a thermal fuse, and a high-limit thermostat. The th...

Samsung NUT-INCH is a proprietary fastening system developed by Samsung Electronics. It is designed to provide a secure and reliable connection between two components, such as a motherboard and a daughterboard. The system consists of two parts: the NUT-INCH nut and the NUT-INCH screw. The nut is m...

The Samsung Roller Retaining Clip (Part# DC61-01228A) is a genuine OEM replacement part for Samsung washing machines. It is used to secure the roller assembly to the drum. The clip is made of durable plastic and features a simple design that makes it easy to install. This clip is compatible with m...

Samsung Seal-Door Part# DC62-00262A is a replacement part for Samsung washing machines. It is a rubber seal that fits around the door of the washing machine and helps to keep water from leaking out. The seal is made of durable rubber and is designed to fit perfectly around the door of your Samsung...

The Samsung PartsIPS Kenmore Clothes Dryer Blower Wheel Fan Blade (Part# DC67-00180B) is a replacement part for Samsung and Kenmore clothes dryers. It is a fan blade that is used to circulate air in the dryer drum. The fan blade is made of plastic and measures approximately 8 inches in diameter. I...

The Samsung PartsIPS Kenmore Clothes Dryer Drive Motor Assembly - Part# DC96-01112E is a replacement part for Samsung and Kenmore clothes dryers. It is an electric motor that drives the drum of the dryer, allowing it to rotate and tumble the clothes. The motor assembly includes the motor, pulley, ...

The Samsung PartsIPS Kenmore Clothes Dryer Heater Ignitor Part# DC47-00022A is a replacement part for Samsung, PartsIPS, and Kenmore clothes dryers. This ignitor is used to ignite the gas that heats the dryer drum. The ignitor is a small metal rod that glows red hot when electricity passes through...

The Samsung PartsIPS Kenmore Clothes Dryer Induction Motor (Part# DC31-00055D) is a high-efficiency, brushless motor designed to provide reliable and powerful performance for your clothes dryer. This motor is specifically designed to reduce energy consumption and noise levels while providing a lon...

The Samsung PartsIPS Kenmore Clothes Dryer Leg Assembly - Part# DC97-12150A is a replacement part for select Samsung, PartsIPS, and Kenmore clothes dryers. This leg assembly is designed to provide stability and support for the dryer. It includes four adjustable legs with a height range of 3.5 inch...

The Samsung PartsIPS Kenmore Clothes Dryer THERMISTOR SENSOR - Part# DC32-00007A is a temperature sensing device used in dryers to monitor the temperature of the air inside the drum. The thermistor is a small disc-shaped component that is typically located near the heating element. It measures the...

The Samsung PartsIPS Kenmore Clothes Dryer THERMOSTAT - Part# DC47-00017A is a replacement part for many Samsung, PartsIPS, and Kenmore clothes dryers. This thermostat is designed to regulate the temperature of the dryer during operation. It works by sensing the temperature inside the dryer and th...

The Samsung PartsIPS Kenmore Clothes Dryer TIMING GEAR DRUM DRIVE BELT - Part# 6602-001655 is a replacement part for Samsung and Kenmore clothes dryers. This belt is used to connect the motor to the drum of the dryer, allowing it to rotate and tumble the clothes. The belt is made of durable rubber...

Samsung Sensor-Radiant Part# DC32-00008A is a motion sensor designed to detect movement in a room. It is used in Samsung SmartThings home automation systems to trigger certain actions when motion is detected. The sensor has a range of up to 15 feet and can detect movement from up to 45 degrees. It...

Samsung SPRING - Part# DC61-02740A is a part used in Samsung washing machines. It is a spring that helps to keep the door of the washing machine closed. The spring is made of metal and has a hook on one end and a loop on the other end. The hook attaches to the door frame and the loop attaches to t...

Samsung Tapping-Screw Part# 6002-000213 is a self-tapping screw used to secure components in Samsung products. It is made of stainless steel and has a flat head with a Phillips drive. The screw has a thread diameter of 3.5mm and a thread pitch of 0.8mm. It is designed to be used with plastic, meta...

Samsung Wire Harness Assy - Part# DC96-00766A is a replacement part for Samsung washing machines. It is a wiring harness that connects the various electrical components of the washing machine, such as the motor, timer, and water level switch. The wire harness helps to ensure that all of these comp...

A screw machine is a type of automated lathe used for mass production of small, precision parts. It is also known as an automatic lathe or a turret lathe. The screw machine is designed to produce parts with a high degree of accuracy and repeatability. It uses a variety of cutting tools to shape th...

The Samsung DC61-02627A Sensor Plate is a replacement part for Samsung washing machines. It is a small, round, plastic plate that sits in the bottom of the washing machine drum. The sensor plate is responsible for detecting the amount of water in the drum and adjusting the water level accordingly....

Socket-Lamp Part# DC47-00021A is a replacement part for Samsung dryers. It is a socket and lamp assembly that is used to provide illumination inside the dryer drum. The socket-lamp assembly consists of a socket, a bulb, and a bracket. The socket is made of plastic and has two metal prongs that fit...

Spring ETC-Tension Part# DC61-01215B is a tension spring used in Samsung washing machines. It is a part of the Electronic Tub Clean (ETC) system, which helps to keep the tub clean and free of debris. The spring is used to provide tension on the ETC system's drive belt, which helps to keep it in pl...

The Tube-Burner Part# DC62-00200A is a device used to heat up air in order to create a hot air stream. It is typically used in HVAC systems, such as furnaces and boilers, to help circulate warm air throughout the home. The Tube-Burner consists of a metal tube with an electric heating element insid...

VALVE-GAS Part# DC62-00201A is a gas valve used in many Samsung dryers. It is a safety device that controls the flow of gas to the burner in the dryer. The valve opens when the dryer calls for heat and closes when the dryer stops calling for heat. This valve is an important part of any gas dryer a...