Model: DV22K6800EWA1-00

DOOR-S/W (Door Switch) Part# DC64-00828B is a door switch used in Samsung washing machines. It is a safety device that detects if the door of the washing machine is open or closed. When the door is open, it will prevent the machine from operating and will display an error code on the control panel...

The LG Electronics Samsung PartsIPS Kenmore Clothes Dryer Drum Roller Wheel Support Assembly DC97-16782A by SUPCO - Part# DE7523 is a replacement part for dryers. It is designed to replace the original roller wheel support assembly in LG, Samsung, PartsIPS and Kenmore clothes dryers. This part is ...

Samsung BELT-TIMING GEAR - Part# 6602-001717 is a timing belt gear that is used in Samsung washing machines. It is a plastic gear that is connected to the motor and helps to control the speed of the drum rotation. The belt-timing gear helps to ensure that the drum rotates at a consistent speed, wh...

Samsung CASE-FILTER - Part# DC61-02273A is a replacement part for Samsung washing machines. It is a filter that is located in the back of the washer and helps to keep lint, dirt, and other debris from entering the machine. The filter should be cleaned regularly to ensure optimal performance of the...

Samsung Cover-Filter(B) - Part# DC63-01002A is a replacement part for Samsung dryers. It is a filter that is used to trap lint and other debris from the air that passes through the dryer. The filter is made of plastic and has a mesh screen on one side. It fits into the lint trap area of the dryer ...

Samsung DOOR LEVER - Part# DC66-00814A is a replacement part for Samsung washing machines. It is a lever that attaches to the door of the washing machine and allows the user to open and close the door. The lever is made of durable plastic and is designed to fit most Samsung washing machines. It co...

The Samsung Drum-Lifter Part# DC66-00541A is a part designed to lift the drum from the washing machine. It is made of durable plastic and metal components and is designed to be used with Samsung washing machines. The Drum-Lifter helps to reduce the amount of strain on the user when lifting the dru...

The Samsung DRYER MOTOR CLAMP - Part# DC61-04225A is a genuine OEM replacement part for Samsung dryers. It is used to secure the motor to the dryer cabinet. This clamp is made of metal and has two holes for mounting screws. It is designed to fit specific Samsung dryer models and replaces part numb...

Samsung Heater-Dry Part# DC47-00030H is a replacement part for Samsung dryers. It is a heating element that helps to dry clothes in the dryer. The heating element is made of a metal coil that heats up when electricity passes through it. The heat produced by the element helps to evaporate the moist...

Samsung Housing-Bearing - Part# DC97-15720A is a replacement part for Samsung washing machines. It is a plastic housing that holds the bearing in place and helps to reduce noise and vibration during the spin cycle. The part is made of durable plastic and includes a bearing, seal, and mounting scre...

Samsung MICRO SWITCH - Part# 3405-001077 is a miniature, snap-action switch designed for use in a variety of applications. It is a single pole, double throw (SPDT) switch with a contact rating of 5A at 125/250VAC and 1A at 30VDC. The switch has an operating temperature range of -40°C to +85°C and ...

Samsung Motor-Ac Drive Part# DC31-00055K is a variable frequency drive (VFD) designed to control the speed of an AC motor. It is a single-phase, 240VAC, 3HP motor controller that can be used to control the speed of an AC motor from 0 to 400Hz. The drive has a built-in keypad and LCD display for ea...

Samsung NUT-INCH is a proprietary fastening system developed by Samsung Electronics. It is designed to provide a secure and reliable connection between two components, such as a motherboard and a daughterboard. The system consists of two parts: the NUT-INCH nut and the NUT-INCH screw. The nut is m...

Samsung PCB-Main - Part# DC92-01851A is a printed circuit board (PCB) that is used in Samsung washing machines. It is the main control board for the machine and is responsible for controlling all of the functions of the washer, such as water level, temperature, spin speed, and cycle selection. The...

The Samsung Roller Retaining Clip (Part# DC61-01228A) is a genuine OEM replacement part for Samsung washing machines. It is used to secure the roller assembly to the drum. The clip is made of durable plastic and features a simple design that makes it easy to install. This clip is compatible with m...

Samsung Screw-Tapping Part# 6002-001306 is a specialized screw used in Samsung products. It is a self-tapping screw that has a unique thread design which allows it to be used in various applications. The screw is made from high-grade steel and has a black oxide finish for corrosion resistance. The...

Samsung Tapping-Screw Part# 6002-000213 is a self-tapping screw used to secure components in Samsung products. It is made of stainless steel and has a flat head with a Phillips drive. The screw has a thread diameter of 3.5mm and a thread pitch of 0.8mm. It is designed to be used with plastic, meta...

A Samsung Thermistor - Part# DC90-10128G is a temperature sensing device that is used in many Samsung appliances. It is a small, round, disc-shaped component that contains a metal oxide semiconductor material. This material changes its electrical resistance when exposed to changes in temperature. ...

Samsung Wire Harness Assy - Part# DC96-00766A is a replacement part for Samsung washing machines. It is a wiring harness that connects the various electrical components of the washing machine, such as the motor, timer, and water level switch. The wire harness helps to ensure that all of these comp...

A screw machine is a type of automated lathe used for mass production of small, precision parts. It is also known as an automatic lathe or a turret lathe. The screw machine is designed to produce parts with a high degree of accuracy and repeatability. It uses a variety of cutting tools to shape th...