Model: DU840CWDQ3

Whirlpool BALL-CHECK Part# WP3369178 is a replacement part for Whirlpool washing machines. It is a small plastic ball that fits into the water inlet valve of the washing machine. The ball helps to prevent water from entering the washer when it is not in use. The ball also helps to regulate the amo...

Whirlpool Channel - Part# WP3374716 is a part used in Whirlpool dishwashers. It is a plastic channel that runs along the bottom of the dishwasher tub and helps to direct water to the spray arms. The channel helps to ensure that water is evenly distributed throughout the dishwasher for optimal clea...

Whirlpool Follower - Part# WP3369529 is a part used in many Whirlpool washing machines. It is a plastic piece that helps to keep the agitator in place during the wash cycle. The follower is located between the agitator and the tub, and it helps to ensure that the agitator moves freely and does not...

Whirlpool FUNNEL-SEP - Part# WP3369176 is a funnel separator used in Whirlpool washing machines. It is a plastic part that helps to separate the clothes from the water during the spin cycle. The funnel separator is located inside the washer drum and helps to keep the clothes from getting tangled u...

Whirlpool GRATE - Part# WP3369322 is a replacement part for Whirlpool gas ranges. It is a cast iron grate that fits over the burner to provide a flat, even cooking surface. The grate helps to evenly distribute heat and prevents food from sticking to the burner. It also helps protect the burner fro...

Whirlpool HOSE - Part# 3369035 is a replacement part for Whirlpool washing machines. It is a drain hose that connects the washing machine to the drain pipe. The hose is made of flexible plastic and measures approximately 4 feet in length. It has an inner diameter of 1-1/4 inches and an outer diame...

Whirlpool Housing Part# WP3369011 is a replacement part for Whirlpool dishwashers. It is the housing that holds the dishwasher motor and pump assembly. This part is made of plastic and is used to replace a damaged or worn out housing. The part includes the mounting screws and gasket needed for ins...

The Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef PartsIPS Kenmore Admiral Dishwasher Detergent Dispenser Door Latch Kit - Part# 676413 is a replacement part for dishwashers. It is designed to replace the existing latch on the detergent dispenser door. The kit inc...

The Whirlpool KNOB-TIMER - Part# 3375349 is a replacement timer knob for Whirlpool washers and dryers. It is a black plastic knob with a white face and red pointer. The timer knob is used to set the amount of time for the washer or dryer cycle. It has a maximum setting of 60 minutes and can be use...

Whirlpool NUT - Part# 3370856 is a genuine OEM replacement part for Whirlpool washers. It is a metal nut that is used to secure the agitator to the drive shaft of the washer. This part is made of metal and is approximately 1 inch in diameter. It has a coarse thread and is used to secure the agitat...

Whirlpool P1-SEAL is a part number 3369177 and is a genuine OEM replacement part for Whirlpool washing machines. It is a rubber seal that fits between the tub and the outer tub of the washing machine. This seal helps to keep water from leaking out of the washing machine during operation. It also h...

The Whirlpool P1-TIP-TINES Part# 676458 is a replacement part for Whirlpool dishwashers. It is a set of tines that are used to hold dishes in place during the dishwashing cycle. The tines are made of durable plastic and feature a unique design that helps to reduce noise and vibration during the cy...

Whirlpool PIN-DOWEL Part# WP3372028 is a replacement part for Whirlpool washers. It is a plastic dowel pin that is used to secure the outer tub to the inner tub. The pin helps to keep the two tubs aligned and prevents them from shifting during operation. The pin also helps to reduce vibration and ...

The Whirlpool Seal - Part# WP3369177 is a replacement part for Whirlpool washing machines. It is a rubber seal that fits around the inner tub of the washing machine and helps to keep water from leaking out. The seal also helps to reduce noise and vibration during the wash cycle. This part is made ...

Whirlpool SPRING - Part# 3373228 is a replacement part for Whirlpool washing machines. It is a tension spring that helps to keep the agitator in place and prevents it from moving around during the wash cycle. The spring is made of metal and measures approximately 1-1/2 inches in length and 1/4 inc...

Whirlpool Support - Part# WP3371745 is a part used in Whirlpool washing machines. It is a suspension rod kit that helps to support the washer tub and keep it level during operation. The kit includes four suspension rods, four rod nuts, and four trunnion assemblies. The rods are made of stainless s...

Whirlpool TIP-TINES WHITE - Part# 675679 is a dishwasher tine kit designed for use with Whirlpool dishwashers. The kit includes 8 white plastic tines, 4 short and 4 long, that are designed to fit into the lower rack of the dishwasher. The tines are made from durable plastic and feature a unique ti...

The Whirlpool WASHER - Part# 3371634 is a top-loading washing machine that features a 3.5 cu. ft. capacity and a stainless steel wash basket. It has an advanced wash system with the Adaptive Wash Technology that senses the size of the load and automatically adjusts the water level, wash action, an...

Whirlpool WHEEL - Part# WP3376961 is a replacement part for Whirlpool washing machines. It is a wheel that helps to support the agitator in the washer. The wheel is made of durable plastic and has a diameter of 3 inches. It is designed to fit most Whirlpool washers and can be used to replace worn ...