Model: DU8016XX3

Whirlpool COVER DIP - Part# 3371569 is a replacement part for Whirlpool washing machines. It is a plastic cover that fits over the dip tube in the washer's water supply line. The dip tube is a plastic tube that runs from the water inlet valve to the bottom of the washer tub. Its purpose is to ensu...

Whirlpool DISK-MOUNT - Part# WP3369012 is a disk mounting kit designed for use with Whirlpool dishwashers. This kit includes all the necessary hardware and instructions to securely mount a dishwasher to the underside of a countertop or cabinet. The kit includes four mounting screws, two mounting b...

The Whirlpool Draw Bar (Part# WP3369000) is a replacement part for Whirlpool washers. It is a plastic draw bar that connects the agitator to the transmission in the washer. The draw bar helps to keep the agitator from spinning too fast and damaging the transmission. It also helps to keep the agita...

The Whirlpool ENDCAP (Part# WP300845) is a part used in many Whirlpool washers and dryers. It is a plastic endcap that fits over the end of the drive shaft and helps to keep the drive shaft from coming out of the washer or dryer. The ENDCAP also helps to keep dirt and debris from entering the driv...

Whirlpool FUSE Part# WP3368928 is a thermal fuse that is used in many Whirlpool dryers. It is designed to protect the dryer from overheating and potentially causing a fire. The fuse is located on the blower housing of the dryer and it will blow if the temperature inside the dryer gets too high. If...

Whirlpool HOSE - Part# 3369035 is a replacement part for Whirlpool washing machines. It is a drain hose that connects the washing machine to the drain pipe. The hose is made of flexible plastic and measures approximately 4 feet in length. It has an inner diameter of 1-1/4 inches and an outer diame...

Whirlpool Housing Part# WP3369011 is a replacement part for Whirlpool dishwashers. It is the housing that holds the dishwasher motor and pump assembly. This part is made of plastic and is used to replace a damaged or worn out housing. The part includes the mounting screws and gasket needed for ins...

Whirlpool LEVER - Part# 3368954 is a replacement part for Whirlpool washing machines. It is a plastic lever that is used to open and close the lid of the washing machine. The lever is connected to the lid by two metal pins, which fit into two holes in the lid. The lever has a handle on one end and...

Whirlpool NUT - Part# 3370856 is a genuine OEM replacement part for Whirlpool washers. It is a metal nut that is used to secure the agitator to the drive shaft of the washer. This part is made of metal and is approximately 1 inch in diameter. It has a coarse thread and is used to secure the agitat...

The Whirlpool P1-TIP-TINES Part# 676458 is a replacement part for Whirlpool dishwashers. It is a set of tines that are used to hold dishes in place during the dishwashing cycle. The tines are made of durable plastic and feature a unique design that helps to reduce noise and vibration during the cy...

The Whirlpool Panel - Part# WP3369769 is a replacement part for a range of Whirlpool ovens. It is the control panel that houses the buttons and knobs used to control the oven. It includes the display, timer, temperature selector, and other settings. The panel also includes a lighted display that s...

Whirlpool PIN - Part# 3368955 is a replacement part for Whirlpool washing machines. It is a plastic pin that is used to secure the agitator to the transmission shaft. The pin fits into a hole in the agitator and is held in place by a metal clip. This part helps keep the agitator from moving around...

Whirlpool RING Part# 3369029 is a replacement part for Whirlpool dishwashers. It is a black rubber ring that fits around the bottom of the dishwasher tub and helps to keep water from leaking out. The ring helps to seal the tub and prevent water from escaping, which can cause damage to the floor or...

The Whirlpool SCREW - Part# 3370389 is a replacement part for Whirlpool washing machines. It is a metal screw that is used to secure the agitator to the drive shaft of the washer. The screw measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It has a Phillips head and is made o...

Whirlpool SCREW-TORX - Part# WP3368921 is a replacement part for Whirlpool appliances. It is a Torx screw that is used to secure the top panel of the appliance to the frame. The Torx head allows for a secure fit and prevents tampering. The screw is made of stainless steel and has a length of 1/2 i...

Whirlpool SEAL - Part# 3369031 is a replacement part for Whirlpool washing machines. It is a rubber seal that fits around the inner tub of the washing machine and helps to keep water from leaking out. The seal is made of durable rubber and is designed to last for many years. It is an important par...

Whirlpool SPRING - Part# WP3368999 is a replacement part for Whirlpool washing machines. It is a tension spring that helps to keep the agitator in place and provide tension for the agitator to move up and down. The spring is made of metal and measures approximately 1-1/2 inches in length. It is de...

Whirlpool TIP-TINES WHITE - Part# 675679 is a dishwasher tine kit designed for use with Whirlpool dishwashers. The kit includes 8 white plastic tines, 4 short and 4 long, that are designed to fit into the lower rack of the dishwasher. The tines are made from durable plastic and feature a unique ti...

The Whirlpool WASHER - Part# 3369038 is a top-loading washing machine that features a 4.2 cu. ft. capacity and 11 wash cycles. It has a stainless steel wash basket and an automatic temperature control for optimal cleaning performance. The washer also features a delay start option, so you can set i...

The Whirlpool WASHER - Part# 3371634 is a top-loading washing machine that features a 3.5 cu. ft. capacity and a stainless steel wash basket. It has an advanced wash system with the Adaptive Wash Technology that senses the size of the load and automatically adjusts the water level, wash action, an...