Model: DU1055XTVD3

Maytag SCREW - Part# 3400836 is a replacement part for Maytag washing machines. It is a Phillips head screw that is used to secure the agitator to the transmission in the washer. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It is made of metal and has a zinc plated finish for ...

The Whirlpool Actuator - Part# WP8524471 is a replacement part for Whirlpool washers. It is an actuator, which is a device that converts energy into motion. This particular actuator is used to control the water level in the washer. It works by sensing the water level in the washer and then activat...

Whirlpool ARM-SPRAY - Part# WP8535083 is a replacement part for Whirlpool dishwashers. It is a spray arm assembly that is used to distribute water evenly throughout the dishwasher during the wash cycle. The spray arm is made of plastic and has several holes in it that allow water to be sprayed ont...

Whirlpool CAP - Part# WP8268317 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the water inlet valve on the back of the washer. The cap helps to keep dirt and debris from entering the water inlet valve, which can cause clogs and other problems. The cap als...

Whirlpool CAP - Part# WP8558307 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the top of the water inlet valve on the back of the washer. The cap helps to keep dirt and debris from entering the water inlet valve, which can cause problems with the washer's...

The Whirlpool CAPACITOR - Part# WPW10334457 is a replacement part for many Whirlpool and Maytag refrigerators. It is a dual-run capacitor that helps the compressor and fan motor run more efficiently. The capacitor stores electrical energy temporarily, then releases it in a controlled manner to hel...

Whirlpool CLAMP - Part# WP8269146 is a part used in Whirlpool washing machines. It is a clamp that holds the drain hose in place and prevents it from slipping out of the drain pipe. The clamp is made of plastic and has two metal clips that attach to the drain hose. It is designed to fit most Whirl...

The Whirlpool Clip - Part# WP8269016 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with Whirlpool washing machines. This clip is used to secure the agitator to the drive shaft. It is made of durable plastic and measures approximately 1-1/2 inches in length and 1/...

Whirlpool CNTRL-ELEC - Part# WPW10285180 is a replacement electronic control board for Whirlpool washing machines. This part is used to replace the original control board in Whirlpool washers that have failed or are no longer working properly. The control board is responsible for controlling the v...

The Whirlpool DOOR-BSKT - Part# 8535077 is a replacement part for Whirlpool dishwashers. It is the door basket, which holds the dishes and silverware in place during the dishwashing cycle. The basket is made of durable plastic and has a handle for easy removal. It fits models beginning with GU2400...

The Whirlpool DOOR-INNER - Part# WPW10254546 is a replacement part for Whirlpool refrigerators. It is the inner door panel that covers the interior of the refrigerator door. This part is made of plastic and comes in white. It is designed to fit most Whirlpool refrigerators and can be used to repla...

Whirlpool FLOAT-ASM - Part# WP8268913 is a part used in Whirlpool washing machines. It is a float assembly that helps to detect the water level in the washer. The float assembly consists of a plastic float, a metal arm, and a switch. The float is connected to the metal arm which is connected to th...

The Whirlpool Gasket - Part# WPW10254545 is a replacement part for a variety of Whirlpool washing machines. It is a black rubber gasket that seals the door of the washing machine to prevent water from leaking out. The gasket is designed to fit around the door opening and create a tight seal when t...

Whirlpool Handle (Part# WP8534984) is a replacement handle for Whirlpool refrigerators. It is made of durable plastic and is designed to fit a variety of Whirlpool refrigerator models. The handle measures approximately 5-1/2 inches long and 1-3/4 inches wide. It has two mounting holes that are spa...

The Whirlpool Handle (Part# WP8534985) is a replacement part for a variety of Whirlpool appliances. It is used to open and close the door of the appliance. The handle is made of durable plastic and comes in a white finish. It measures approximately 4-1/2 inches long and 1-1/2 inches wide. The hand...

The Whirlpool HINGE-DOOR Part# WPW10143373 is a replacement part for a refrigerator door. It is designed to replace the existing hinge on the door of a Whirlpool refrigerator. The part is made of durable plastic and metal and is designed to provide a secure fit and long-lasting performance. The pa...

The Whirlpool HINGE-DOOR Part# WPW10143374 is a replacement part for a refrigerator door. It is designed to replace the original hinge on the door of a Whirlpool refrigerator. The part is made of durable plastic and metal and features a spring-loaded design that helps keep the door securely closed...

Whirlpool Holder - Part# WP3385160 is a replacement part for Whirlpool dishwashers. It is a plastic holder that holds the silverware basket in place in the dishwasher. The holder is made of durable plastic and is designed to fit most Whirlpool dishwashers. It attaches to the side of the dishwasher...

The Whirlpool INLET-WATR Part# WPW10195536 is a water inlet valve for a washing machine. It is used to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when the washer is ...

The Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef PartsIPS Kenmore Admiral Dishwasher Anti-Tip Side Mount Installation Bracket Kit - Part# 8212560 is a kit designed to help secure a dishwasher to the floor. The kit includes two brackets, screws, and instructions f...

The Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef PartsIPS Kenmore Admiral Dishwasher Bi-Metal Fuse - Part# W10258275 is a safety device that is designed to protect the dishwasher from electrical overloads. It is a two-piece device that consists of a metal strip a...

Whirlpool LATCH Part# WP8539118 is a replacement part for Whirlpool washing machines. It is a latch assembly that is used to secure the lid of the washing machine. The latch assembly includes a handle, spring, and two screws. The handle is used to open and close the lid of the washing machine, whi...

Whirlpool MOUNT - Part# WP3385159 is a mounting bracket designed to secure a Whirlpool washing machine to the wall. It is made of heavy-duty steel and features a powder-coated finish for added durability. The bracket includes two mounting holes and comes with all necessary hardware for installatio...

The Whirlpool P1-CLIP Part# 8269308 is a clip designed to secure the water line to the back of a refrigerator. It is made of durable plastic and is designed to fit most refrigerators. The clip helps keep the water line in place and prevents it from becoming loose or disconnected. The clip also hel...

Whirlpool PAD-INS Part# WPW10073520 is a replacement part for Whirlpool washers. It is a pad that fits between the inner and outer tubs of the washer to help reduce noise and vibration. The pad is made of a durable rubber material that helps absorb shock and reduce noise. It also helps to keep the...

The Whirlpool Panel - Part# WPW10195777 is a genuine OEM (Original Equipment Manufacturer) replacement part for Whirlpool refrigerators. This panel is used to cover the control board and other components of the refrigerator. It is made of durable plastic and is designed to fit perfectly in place. ...

Whirlpool PANEL - Part# WPW10195778 is a replacement part for Whirlpool washers. It is a control panel that houses the various buttons and dials used to operate the washer. The panel includes the power button, cycle selector knob, temperature selector knob, and other settings such as water level a...

Whirlpool PARTS-MISC - Part# WPW10292152 is a miscellaneous part for Whirlpool appliances. It is a replacement part for a variety of Whirlpool appliances, including refrigerators, dishwashers, washers and dryers. This part is used to replace worn or damaged parts in the appliance. It is made of du...

The Whirlpool SCREW - Part# W10348413 is a replacement part for Whirlpool washing machines. It is a genuine OEM part and is used to secure the agitator to the drive shaft. The screw measures 1/4-20 x 1/2 inch and is made of metal. It is used in many different models of Whirlpool washers, including...

The Whirlpool Screw - Part# WP3400836 is a replacement part for various Whirlpool appliances. It is a #8-32 x 1/2 inch Phillips head screw. This screw is used to secure the control panel to the appliance frame. It is made of steel and has a zinc plated finish for corrosion resistance. The screw ha...

The Whirlpool Screw - Part# WPW10177098 is a replacement part for Whirlpool appliances. It is a metal screw with a Phillips head and measures approximately 1/4 inch in diameter and 1-1/2 inches in length. This screw is used to secure the agitator to the transmission shaft in some Whirlpool washers...

Whirlpool SCREW - Part# WPW10348413 is a replacement part for Whirlpool appliances. It is a self-tapping screw that is used to secure the cabinet panels of the appliance. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a slotted head and is made of steel. This part is used...

Whirlpool SHIELD is a water filtration system designed to reduce contaminants in drinking water. It uses a combination of activated carbon and ion exchange resin to reduce chlorine, lead, cysts, and other contaminants from your water. The system also includes a sediment filter to remove dirt and r...

Whirlpool SHIELD is a refrigerator water filter that is designed to reduce contaminants from your drinking water. It is part of the Whirlpool line of refrigerator water filters and is designed to fit most Whirlpool refrigerators. The WP8573240 filter uses a carbon block filter to reduce chlorine t...

Whirlpool Shield Part# WPW10343251 is a part designed to protect the interior of a Whirlpool washing machine from water damage. It is made of a durable plastic material and is designed to fit around the inner tub of the washing machine. The shield helps to prevent water from entering the interior ...

Whirlpool Standpipe Part# WPW10175383 is a part used in Whirlpool washing machines. It is a plastic pipe that connects the water inlet valve to the water level pressure switch. The standpipe is designed to allow water to flow from the inlet valve into the washer tub and also provide an air gap bet...

Whirlpool STRIKE - Part# WP8580309 is a replacement part for Whirlpool washers. It is a strike that is used to secure the lid of the washer when it is closed. The strike attaches to the lid and the cabinet of the washer, and when the lid is closed, it engages with a latch on the cabinet to keep it...

The Whirlpool SUMP Part# WP8572618 is a sump pump designed to help keep basements and crawl spaces dry. It is designed to remove excess water from these areas, preventing flooding and other water damage. The pump features a 1/3 HP motor that can move up to 3,000 gallons of water per hour. It also ...

Whirlpool SWITCH - Part# WP8269209 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the water level, temperature, and agitation settings of the machine. The switch has three positions: Low, Medium, and High. In the Low position, the water level is s...

The Whirlpool VALVE-INLT - Part# WPW10195049 is a water inlet valve for a washing machine. It is used to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when activated by...

The Whirlpool Volute W10142656 is a part used in Whirlpool washing machines. It is a plastic part that fits into the pump housing and helps to circulate the water during the wash cycle. The volute is responsible for helping to move the water from the tub to the pump, and then back into the tub. It...

Whirlpool WHEEL - Part# WP8575281 is a replacement part for Whirlpool washers. It is a plastic wheel that fits on the bottom of the washer tub and helps to keep the tub in place during operation. The wheel has a diameter of 3-1/2 inches and is made of durable plastic. It is designed to fit Whirlpo...