Model: DU1055XTPQ3

Maytag SCREW - Part# 3400836 is a replacement part for Maytag washing machines. It is a Phillips head screw that is used to secure the agitator to the transmission in the washer. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It is made of metal and has a zinc plated finish for ...

The Whirlpool Actuator - Part# 8524472 is a replacement part for Whirlpool washing machines. It is a motorized device that is used to control the operation of the washer. The actuator is responsible for controlling the water level, wash cycle selection, and spin speed. It also controls the timer a...

The Whirlpool Actuator - Part# WP8524472 is a replacement part for Whirlpool washers. It is an actuator, which is a device that converts energy into motion. This particular actuator is used to control the water level in the washer. It is connected to the water inlet valve and controls the amount o...

Whirlpool ARM-SPRAY - Part# WP8269024 is a replacement part for Whirlpool dishwashers. It is a spray arm that helps to evenly distribute water during the dishwashing cycle. The spray arm is made of durable plastic and has multiple holes that allow water to be sprayed in all directions. This helps ...

Whirlpool Bearing - Part# WP8268340 is a genuine OEM replacement part for Whirlpool washing machines. This bearing is used to support the drum and tub assembly in the washer. It helps to reduce noise and vibration during the spin cycle. The bearing is made of high-quality materials and is designed...

Whirlpool Bushing - Part# WP8268990 is a replacement part for Whirlpool washers. It is a plastic bushing that fits between the inner and outer tubs of the washer. The bushing helps to reduce vibration and noise during the spin cycle. It also helps to keep the inner and outer tubs from rubbing agai...

Whirlpool CAP - Part# WP8268317 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the water inlet valve on the back of the washer. The cap helps to keep dirt and debris from entering the water inlet valve, which can cause clogs and other problems. The cap als...

Whirlpool CAP - Part# WP8558307 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the top of the water inlet valve on the back of the washer. The cap helps to keep dirt and debris from entering the water inlet valve, which can cause problems with the washer's...

The Whirlpool Chopper (Part# WP8268383) is a kitchen appliance designed to quickly and easily chop, mince, and dice food. It features a powerful motor and stainless steel blades that can chop through even the toughest ingredients. The chopper also has a large capacity bowl that can hold up to 8 cu...

The Whirlpool Clip - Part# WP8269016 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with Whirlpool washing machines. This clip is used to secure the agitator to the drive shaft. It is made of durable plastic and measures approximately 1-1/2 inches in length and 1/...

Whirlpool COVR-SCREW - Part# WP3400919 is a replacement part for Whirlpool appliances. It is a cover screw that is used to secure the front panel of the appliance to the cabinet. The screw is made of metal and has a Phillips head for easy installation. It measures 1/4 inch in diameter and 1/2 inch...

The Whirlpool Dishrack Part# WP8539214 is a dishrack designed to fit most standard kitchen sinks. It is made of durable plastic and features a two-tier design with a removable top rack for easy cleaning. The top rack has adjustable tines to accommodate different sizes of dishes, while the bottom r...

The Whirlpool DOOR-BSKT - Part# 8535077 is a replacement part for Whirlpool dishwashers. It is the door basket, which holds the dishes and silverware in place during the dishwashing cycle. The basket is made of durable plastic and has a handle for easy removal. It fits models beginning with GU2400...

The Whirlpool Door-Inner (Part# WP8269311) is a replacement part for Whirlpool refrigerators. It is the inner part of the refrigerator door, which includes the handle and hinges. This part is made of plastic and is designed to fit all Whirlpool refrigerators. It comes with a one-year warranty and ...

Whirlpool FLOAT-ASM - Part# WP8268913 is a part used in Whirlpool washing machines. It is a float assembly that helps to detect the water level in the washer. The float assembly consists of a plastic float, a metal arm, and a switch. The float is connected to the metal arm which is connected to th...

The Whirlpool GASKET - Part# WP8269258 is a replacement part for Whirlpool refrigerators. It is a rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and is designed to fit perfectly around the door frame of your refriger...

The Whirlpool GASKET - Part# WP8269259 is a replacement part for Whirlpool refrigerators. It is a black rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is designed to fit most Whirlpool refrigerators and is easy to install. It helps to ensure ...

Whirlpool Handle (Part# WP8534984) is a replacement handle for Whirlpool refrigerators. It is made of durable plastic and is designed to fit a variety of Whirlpool refrigerator models. The handle measures approximately 5-1/2 inches long and 1-3/4 inches wide. It has two mounting holes that are spa...

The Whirlpool Handle (Part# WP8534985) is a replacement part for a variety of Whirlpool appliances. It is used to open and close the door of the appliance. The handle is made of durable plastic and comes in a white finish. It measures approximately 4-1/2 inches long and 1-1/2 inches wide. The hand...

The Whirlpool Holder Part# WP8268325 is a replacement part for a variety of Whirlpool dishwashers. This part is used to hold the lower dishrack in place and prevent it from sliding out of the dishwasher. It is made of durable plastic and is designed to fit specific models of Whirlpool dishwashers....

Whirlpool LATCH Part# WP8539118 is a replacement part for Whirlpool washing machines. It is a latch assembly that is used to secure the lid of the washing machine. The latch assembly includes a handle, spring, and two screws. The handle is used to open and close the lid of the washing machine, whi...

Whirlpool LEVER - Part# WP8268892 is a replacement part for Whirlpool washing machines. It is a lever that is used to open and close the lid of the washing machine. The lever is made of durable plastic and has a white finish. It measures approximately 4 inches in length and 1 inch in width. This p...

Whirlpool MOUNT - Part# WP8268321 is a mounting bracket designed to securely attach a Whirlpool dishwasher to the underside of a countertop. The bracket is made of heavy-duty steel and features two adjustable arms that can be adjusted to fit different countertop depths. The bracket also includes f...

The Whirlpool P1-CLIP Part# 8269308 is a clip designed to secure the water line to the back of a refrigerator. It is made of durable plastic and is designed to fit most refrigerators. The clip helps keep the water line in place and prevents it from becoming loose or disconnected. The clip also hel...

The Whirlpool P1-VALVE-CHEK is a part used in many Whirlpool washing machines. It is a valve check that helps to regulate the water flow in the machine. The valve check is located between the water inlet valve and the pressure switch. It helps to ensure that the correct amount of water is entering...

Whirlpool PAD (Part# WP8268961) is a part for Whirlpool washing machines. It is a drain pump assembly that helps to pump out the water from the washer during the draining cycle. The part includes the motor, housing, and impeller. The motor helps to spin the impeller which creates suction to draw w...

Whirlpool PROTECTOR - Part# WP8531857 is a water heater protector designed to protect your water heater from corrosion and scale buildup. It is a unique combination of polyphosphate and scale inhibitor that helps reduce the amount of corrosion and scale buildup in your water heater. The protector ...

The Whirlpool Pump-Drain Part# WP661658 is a replacement part for a variety of Whirlpool washing machines. It is designed to pump out water from the washer during the drain cycle. The pump-drain is made of durable plastic and features a built-in check valve to prevent backflow. It also includes an...

The Whirlpool Screw - Part# WP3400836 is a replacement part for various Whirlpool appliances. It is a #8-32 x 1/2 inch Phillips head screw. This screw is used to secure the control panel to the appliance frame. It is made of steel and has a zinc plated finish for corrosion resistance. The screw ha...

The Whirlpool Screw Cover - White - Part# 3400919 is a white plastic screw cover designed to fit over the screws used to secure the top panel of a Whirlpool washer or dryer. The cover is made of durable plastic and features a textured finish that helps it blend in with the surrounding washer or dr...

Whirlpool SEAL - Part# 8269296 is a replacement part for Whirlpool washers. It is a rubber seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the washer. The seal also helps to reduce noise and vibration during the wash cycle. This part is made of du...

Whirlpool SEAL - Part# WP8268433 is a replacement part for Whirlpool washing machines. It is a tub seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the washer. The seal is made of rubber and is designed to be durable and long-lasting. It is an impo...

Whirlpool SEAL - Part# WP8269296 is a replacement part for Whirlpool washing machines. It is a rubber seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the machine. The seal is made of durable rubber and is designed to last for many years. It is an ...

Whirlpool SHIELD is a water filtration system designed to reduce contaminants in drinking water. It uses a combination of activated carbon and ion exchange resin to reduce chlorine, lead, cysts, and other contaminants from your water. The system also includes a sediment filter to remove dirt and r...

The Whirlpool Support-Arm Part# WP8268342 is a replacement part for a variety of Whirlpool washing machines. It is designed to provide additional support to the washer's drum and suspension system. The part is made of durable plastic and metal components, and it includes a mounting bracket that at...

Whirlpool SUPPRT-HTR - Part# 8269262 is a replacement part for Whirlpool dryers. It is a heating element support bracket that helps to secure the heating element in place. This part is made of metal and has two mounting holes for attaching the heating element to the dryer. The bracket also has two...

The Whirlpool SWITCH - Part# WP8268909 is a replacement part for a variety of Whirlpool appliances. It is a 3-position switch that is used to control the operation of the appliance. The switch has three positions: off, on, and start. The switch is typically used to control the operation of a motor...

Whirlpool SWITCH - Part# WP8269209 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the water level, temperature, and agitation settings of the machine. The switch has three positions: Low, Medium, and High. In the Low position, the water level is s...

A Whirlpool Thermister (Part# WP8269208) is a temperature-sensing device used in many Whirlpool appliances. It is a small, round, black plastic component with two wires attached to it. The thermister measures the temperature of the air or liquid inside the appliance and sends a signal to the contr...

The Whirlpool WP661566 Thermostat is a digital, programmable thermostat designed to control the temperature in your home. It features a large, easy-to-read LCD display and simple controls that allow you to set the desired temperature and schedule when it should be maintained. The thermostat also h...

The Whirlpool Valve-Chek (Part# WP8268375) is a valve testing and repair kit designed to help diagnose and repair problems with Whirlpool washers. The kit includes a valve testing tool, a pressure gauge, a valve seat removal tool, and a valve seat installation tool. The valve testing tool is used ...

The Whirlpool WASHER - Part# 8531018 is a top-loading washing machine that features a large capacity of 4.2 cubic feet. It has a stainless steel wash basket and a direct drive motor for quiet operation. The washer also features 12 wash cycles, including the Deep Water Wash cycle for larger loads a...

Whirlpool WHEEL - Part# WP8268645 is a replacement part for Whirlpool washing machines. It is a plastic wheel that is used to support the agitator in the washer. The wheel is designed to fit most Whirlpool washing machines and is made of durable plastic. It has a diameter of 2-3/4 inches and comes...

Whirlpool WHEEL - Part# WP8268655 is a replacement part for Whirlpool washing machines. It is a wheel that helps to move the agitator in the washer. The wheel is made of durable plastic and is designed to fit most Whirlpool washers. It measures approximately 3 inches in diameter and has four spoke...

The Whirlpool WHEEL-TUB Part# 8270016 is a replacement part for a washing machine. It is the main component of the washing machine that holds the clothes and water during the wash cycle. The tub is made of durable plastic and features a unique wheel design that allows it to spin freely during the ...

The Whirlpool Wheel-Tub Part# WP8270016 is a replacement part for Whirlpool washing machines. It is a plastic wheel that fits into the tub of the washing machine and helps to rotate the clothes during the wash cycle. The wheel is made of durable plastic and is designed to last for many years. It c...