Model: DS30E2

COVER, STIRRER - Part# R0150115 is a replacement part for a laboratory stirrer. It is a plastic cover that fits over the top of the stirrer to protect it from dust and debris. The cover is made of durable plastic and has an easy-to-use snap-on design. The part number R0150115 is specific to this p...

A fan blade motor, also known as a blower motor, is an electric motor that is used to power a fan blade in order to move air. The fan blade motor is typically found in HVAC systems and other applications where air needs to be moved. The fan blade motor is connected to the fan blade via a belt or d...

FUSE-20A - Part# M0805203 is a 20 Amp fuse manufactured by Cooper Bussmann. It is a Class RK5, time-delay fuse with a voltage rating of 600VAC/300VDC. The fuse has a dual element design that provides both time-delay and current limiting characteristics. The time-delay feature allows the fuse to wi...

KIT, TRIAC - Part# R0157373 is a repair kit for a TRIAC (Triode for Alternating Current) device. A TRIAC is an electronic component that acts as a switch for controlling the flow of alternating current (AC). It is used in many applications such as dimmers, motor speed control, and light dimming. T...

Relay 59001981 is a type of electromechanical switch that is used to control the flow of electricity in an electrical circuit. It consists of a coil, an armature, and a set of contacts. When the coil is energized, it creates a magnetic field which causes the armature to move and close the contacts...

A snubber assy - Part# 59002017 is an electrical component used to protect sensitive electronic equipment from voltage spikes. It is typically used in power supplies, motor controllers, and other high-voltage applications. The snubber assy consists of a resistor and capacitor connected in series t...

The Universal Microwave Oven Ceramic Fuse by Whirlpool Maytag is a safety device designed to protect the microwave oven from damage due to an overload or short circuit. The fuse is made of a ceramic material and is designed to blow when the current exceeds its rated value. This prevents further da...

Washer-Nylon Part# M0274066 is a type of washer used in many applications. It is made of nylon and is designed to provide a secure, tight fit between two components. The washer has an outer diameter of 0.625 inches and an inner diameter of 0.500 inches. It also has a thickness of 0.062 inches and ...

A wheel-blower is a type of air blower that is designed to be used in industrial and commercial applications. It is typically used to move air, dust, and other particles from one area to another. The wheel-blower Part# C3670809 is a high-performance blower that features a powerful motor and a dura...

The Whirlpool BULB-LIGH Part# WP67002552 is a replacement light bulb for select Whirlpool and Maytag refrigerators. This light bulb is designed to fit into the refrigerator's interior light socket and provide illumination for the interior of the refrigerator. It is a 25 watt, 120 volt, A15 style b...

Whirlpool FUSE Part# WPM0805102 is a replacement fuse for Whirlpool dryers. It is a thermal fuse that is designed to shut off the power to the dryer if it overheats. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the bur...

The Whirlpool SCREW - Part# 59002061 is a replacement part for a variety of Whirlpool appliances. It is a Phillips head screw with a 1/4-inch diameter and a length of 1-1/2 inches. This screw is used to secure the top panel of the appliance to the frame. It is made from steel and has a zinc plated...

Whirlpool SCREW - Part# WP12990527 is a replacement part for Whirlpool appliances. It is a metal screw with a Phillips head and measures 1/4 inch in diameter by 1-1/2 inches in length. This screw is used to secure the top panel of the appliance to the frame. It is also used to secure other compone...

The Whirlpool Screw - Part# WP59002061 is a replacement part for Whirlpool washing machines. It is a small, metal screw that is used to secure the agitator to the top of the washer tub. The screw measures approximately 1/4 inch in diameter and 1/2 inch in length. It has a Phillips head and is made...