Model: DFSF9VKBABB

GE Asm Cap Chute Ice - Part# WR02X12661 is a replacement part for GE refrigerators. It is the chute cap assembly for the ice dispenser. This part is made of plastic and includes the chute cap, spring, and mounting screws. The chute cap fits over the ice chute opening and helps to keep ice from spi...

GE ASM CASE-ICE ROUTE - Part# WR13X10737 is a replacement part for GE refrigerators. It is a plastic ice route that is used to direct the flow of water from the ice maker to the ice bin. The part number WR13X10737 is used to identify this specific part and can be found on the back of the refrigera...

GE ASM COVER VEG - Part# WR32X10762 is a replacement vegetable drawer cover for GE refrigerators. This part is made of durable plastic and is designed to fit specific GE refrigerator models. It helps keep the vegetables in the refrigerator fresh and organized. The part number WR32X10762 is used to...

GE ASM TANK WATER - Part# WR17X12741 is a replacement water tank for select GE refrigerator models. This part is made of durable plastic and is designed to hold the water that is dispensed from the refrigerator. It includes a float switch, which helps to regulate the amount of water in the tank. T...

The GE ASM TEMP SENSOR - Part# WR23X10582 is a temperature sensor used in refrigerators and freezers. It is designed to detect the temperature inside the appliance and send a signal to the main control board. The main control board then uses this signal to adjust the cooling system accordingly. Th...

GE BIMETAL Part# WR02X12592 is a bimetallic thermostat used in refrigerators and freezers. It is a two-piece device consisting of a copper coil and a steel plate. The copper coil is connected to the refrigerator's temperature control knob, while the steel plate is connected to the refrigerator's e...

GE C-CLIP Part# WR02X12604 is a clip used to secure the condenser fan motor to the condenser fan motor bracket. It is made of plastic and is designed to fit a variety of GE refrigerator models. The clip has two prongs that fit into two holes in the bracket, and then the clip is snapped into place....

GE CAP CASE FRENCH MID - Part# WR02X12645 is a replacement part for French-door refrigerators. It is a plastic cover that fits over the mid-section of the refrigerator door, and it helps to keep the cold air inside the refrigerator. The part number WR02X12645 is specific to GE brand refrigerators,...

The GE Cover Heater French (Part# WR13X10491) is a replacement part for General Electric refrigerators. It is a heating element that helps to keep the refrigerator's interior temperature consistent. The cover heater is located on the back wall of the refrigerator and helps to prevent condensation ...

GE Cover Relay Part# WR02X11949 is a replacement part for a variety of GE refrigerators. It is a two-pole, double-throw relay that helps control the compressor and defrost cycle. The relay is used to switch power to the compressor and defrost heater on and off as needed. It is also used to control...

The GE Cover Water Filter (Part# WR13X10495) is a replacement water filter for select GE refrigerators. It is designed to reduce chlorine taste and odor, as well as sediment, rust, and other impurities from your drinking water. The filter also helps to reduce the amount of lead, cysts, and other c...

GE Defrost Heater - Part# WR51X10105 is a replacement part for GE refrigerator models. It is used to defrost the evaporator coils in the freezer section of the refrigerator. The heater is located behind the back wall of the freezer and is responsible for melting any ice that has built up on the ev...

The GE Defrost Heater FZ - Part# WR51X10104 is a replacement part for GE refrigerator models. It is used to help keep the evaporator coils from freezing up and preventing the refrigerator from cooling properly. The heater is made of a stainless steel sheath with a heating element inside. It is des...

GE EVAP BLADE BACKWARD - Part# WR60X10264 is a replacement evaporator fan blade for GE refrigerators. This part is used to replace the original evaporator fan blade that has become worn or damaged. The part is made of plastic and is designed to fit most GE refrigerator models. It measures approxim...

The GE EVAP MOTOR FZ LEFT - Part# WR60X10255 is a replacement evaporator fan motor for GE refrigerators. It is designed to circulate air through the refrigerator and freezer compartments to keep them at the desired temperature. The motor is located in the back of the refrigerator and has two wires...

The GE Evap Motor Housing - Part# WR13X10509 is a replacement part for refrigerators. It is the housing that contains the evaporator fan motor and blade assembly. The evaporator fan motor and blade assembly are responsible for circulating air throughout the refrigerator to keep it cool. This part ...

The GE Fixer Handle - Part# WR02X12621 is a replacement handle for GE refrigerators. It is used to replace the existing handle on the refrigerator door. The handle is made of durable plastic and features a white finish that will match most refrigerator models. The handle measures approximately 3 i...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Ice Maker Part# WR30X10131 is a replacement ice maker kit for select GE, Hotpoint, PartsIPS and Kenmore refrigerators. This kit includes the ice maker, mounting hardware, and installation instructions. The ice maker is designed to prod...

GE Heater Metal Sheath - Part# WR02X12603 is a replacement part for GE dryers. It is a metal sheath that surrounds the heating element in the dryer. The metal sheath helps to protect the heating element from damage and also helps to keep the heat inside the dryer. This part is made of durable meta...

The GE Ice Bucket Assembly Profile (Part# WR29X10097) is a replacement part for GE refrigerators. It is a plastic bucket that holds the ice cubes and directs them into the ice maker. The assembly includes the bucket, auger, and agitator. The bucket has a lid that helps keep the ice cubes from spil...

GE Rear Wheel - Part# WR02X13137 is a replacement wheel for GE brand dryers. It is made of durable plastic and measures approximately 4 inches in diameter. The wheel has a 3/4 inch hub and is designed to fit most GE dryers. This part helps to keep the drum of the dryer rotating smoothly, allowing ...

GE Relay Protector O/L - Part# WR07X10088 is a protective device designed to protect electrical circuits from overloading and short-circuiting. It is a single-pole, double-throw (SPDT) relay with an adjustable trip point. The trip point can be adjusted from 0.1 to 0.9 amperes, allowing the user to...

GE Sensor Temp - Part# WR23X10580 is a temperature sensor for GE refrigerators. It is used to monitor the temperature inside the refrigerator and send a signal to the main control board when the temperature rises above or falls below a certain level. The sensor is located in the fresh food compart...

GE Valve-Water Fitting - Part# WR57X10091 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with General Electric refrigerators. This valve-water fitting is used to connect the water line from the wall to the refrigerator. It is made of durable plastic and includes a...

The GE Water Filter Head (Part# WR17X12512) is a replacement part for the GE refrigerator water filter system. It is designed to replace the existing filter head in your refrigerator and is compatible with all GE SmartWater and select GE Profile refrigerators. The filter head is made of durable pl...

Hinge French is a part used in refrigerators and freezers. It is a type of door hinge that is designed to be used with French doors. The part number WR13X10516 is a replacement part for the right side of the refrigerator door. It is made of plastic and metal and measures approximately 3 inches lon...