Model: DDW2470AWP

The Maytag CLIP, ADJUSTABLE PEG - Part# Y912709 is a replacement part for Maytag washing machines. It is a plastic clip that is used to adjust the height of the agitator in the washer tub. The clip has two prongs that fit into two slots on the agitator and can be adjusted up or down to change the ...

The Maytag O-Ring Heater, Part# Y913079 is a replacement part for Maytag dryers. It is an O-ring made of rubber that fits around the heating element in the dryer. The O-ring helps to keep the heat from escaping and helps to keep the dryer running efficiently. This part is used in many Maytag model...

The Maytag P-1 ACTUATOR LEVER - Part# 912014 is a replacement part for Maytag washers. It is a lever that connects the timer knob to the timer shaft. This part is used to control the cycle selection and water level settings on the washer. The lever is made of durable plastic and has a black finish...

Maytag P-1 CAP - Part# 99001443 is a replacement part for Maytag washing machines. It is a plastic cap that fits over the drain hose and helps to prevent water from leaking out of the machine. The cap is designed to fit over the drain hose, and it has an inner diameter of 1-1/4 inches. The cap als...

The Maytag P-1 CLIP, FOLD AWAY TINE - Part# 99001436 is a replacement part for Maytag dishwashers. It is a clip that attaches to the lower rack of the dishwasher and holds the fold away tines in place. The fold away tines are used to adjust the height of the lower rack, allowing for larger items t...

The Maytag P-1 ELEMENT, HEATING - Part# 99002360 is a replacement part for Maytag dryers. It is a heating element that helps to dry clothes in the dryer. The element is made of metal and has two terminals that connect to the power source. It is rated at 5400 watts and 240 volts. The element has a ...

The Maytag P-1 LATCH, FOLD-AWAY TIN - Part# 99001746 is a replacement part for Maytag washers and dryers. It is a latch that allows the top of the washer or dryer to fold away for easy access to the interior of the machine. The latch is made of durable plastic and features a spring-loaded design t...

The Maytag P-1 NUT - Part# 99001426 is a replacement part for Maytag washers. It is a metal nut that is used to secure the drain hose to the washer's drain pump. The nut is made of metal and has a diameter of 1/2 inch. It has a hexagonal shape and is used to secure the drain hose to the pump. This...

The Maytag P-1 O Ring Part# 912510 is a replacement part for Maytag washing machines. It is an O-ring that fits around the water inlet valve and helps to create a seal between the valve and the washing machine's water supply line. The O-ring helps to prevent water from leaking out of the machine, ...

The Maytag P-1 OUTLET, SNAP - Part# 912680 is a replacement part for a Maytag washing machine. It is an electrical outlet that connects to the main power source and provides power to the washing machine. The outlet has two prongs and is designed to fit into a standard wall outlet. It is made of du...

Maytag P-1 SCREW, TRIM - Part# 912618 is a replacement part for Maytag appliances. It is a screw that is used to secure the trim on the appliance. The screw is made of metal and has a Phillips head. It measures 1/4 inch in diameter and 1/2 inch in length. This part is used to secure the trim on th...

The Maytag P-1 SEAL, VENT (DOOR) - Part# 99002186 is a replacement part for Maytag refrigerators. It is a plastic seal that fits around the door of the refrigerator to help keep cold air in and warm air out. The seal helps to maintain the temperature inside the refrigerator and prevent energy loss...

The Maytag P-1 SEAL,INLET ASSEM - Part# 99002150 is a part used in Maytag washing machines. It is a seal that fits around the inlet valve and helps to prevent water from leaking out of the machine. The seal is made of rubber and is designed to fit snugly around the inlet valve. This part helps to ...

The Maytag P-1 TINE, BOWL (FRT) - Part# 99002137 is a replacement part for Maytag dishwashers. It is a tine that fits into the front of the dishwasher bowl and helps to hold dishes in place during the washing cycle. The tine is made of durable plastic and is designed to last for many years. It is ...

The Maytag P-1 TINE, BOWL (REAR - Part# 99002138) is a replacement part for Maytag dishwashers. It is a rear tine that fits into the dishwasher's bowl and helps to keep dishes in place during the washing cycle. The tine is made of durable plastic and is designed to last for many years. It is easy ...

The Maytag P-1 Wheel Mounting Plate (Part# 99002073) is a replacement part for Maytag washers. It is used to secure the wheels to the washer cabinet. The plate is made of durable metal and has four mounting holes for attaching the wheels. It also has two slots for the wheel axles. This part is des...

The Maytag P-1 WHEEL, TUB - Part# 99002183 is a replacement part for Maytag washing machines. It is a plastic wheel that attaches to the tub of the washing machine and helps to spin the tub during the wash cycle. The wheel is made of durable plastic and has a diameter of 3.5 inches. It is designed...

Maytag TRACK, RACK - Part# Y912545 is a replacement part for Maytag dishwashers. It is a plastic track that is used to hold the dishwasher rack in place. The track is designed to fit most Maytag dishwashers and can be used to replace a broken or worn out track. The part number Y912545 is specific ...

Whirlpool ARM-SPRAY - Part# WP99001788 is a replacement part for Whirlpool dishwashers. It is a spray arm assembly that helps to evenly distribute water and detergent throughout the dishwasher during the wash cycle. The spray arm is made of plastic and has multiple holes in it to allow water to be...

Whirlpool ARM-SPRAY - Part# WP99002043 is a replacement part for Whirlpool dishwashers. It is a spray arm assembly that is used to spray water and detergent onto the dishes during the washing cycle. The spray arm is made of plastic and has multiple holes in it to allow water to be sprayed onto the...

The Whirlpool Clip-Adju Part# WPY912709 is a clip-on adjustable bracket designed to fit most Whirlpool dishwashers. This bracket allows you to adjust the height of the dishwasher so that it fits perfectly in your kitchen. The bracket is made of durable plastic and features a simple design that mak...

The Whirlpool Impeller A (Part# WP99002069) is a replacement part for Whirlpool washing machines. It is a plastic impeller that helps to move the water through the washer during the wash cycle. The impeller is located in the bottom of the washer and is connected to the motor shaft. It has four bla...

The Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef PartsIPS Kenmore Admiral Dishwasher Pump Housing Filter Assembly - Part# 99001791 is a replacement part for dishwashers. It is designed to filter out food particles, dirt, and other debris from the water that is us...

Whirlpool LINK-DOOR is a smart door lock system that is designed to provide users with enhanced security and convenience. The system consists of a base unit, which is installed on the inside of the door, and a keypad, which is mounted on the outside. The base unit connects to the home's Wi-Fi netw...

The Whirlpool Plate - Part# WP99002073 is a replacement part for a variety of Whirlpool dishwashers. It is a plastic plate that fits over the bottom of the dishwasher tub and helps to protect the interior of the dishwasher from food particles and other debris. The plate also helps to keep water fr...

The Whirlpool Screw Part# WP912618 is a replacement part for Whirlpool appliances. It is a Phillips head screw with a #8-18 thread size and a 1/2 inch length. This screw is used to secure the top panel of some Whirlpool refrigerators, freezers, and other appliances. It is made of steel and has a z...

The Whirlpool SEAL-DOOR Part# WP99002140 is a replacement part for Whirlpool refrigerators. It is a door seal that helps to keep the cold air inside the refrigerator and prevent warm air from entering. The seal is made of durable plastic and is designed to fit most Whirlpool refrigerators. It is e...

Whirlpool Seal-Air Part# WP99002150 is a replacement part for Whirlpool refrigerators. It is a rubber seal that goes around the door of the refrigerator to help keep cold air in and warm air out. The seal helps to reduce energy costs by preventing cold air from escaping and warm air from entering ...

The Whirlpool SPRING-DO Part# WP912652 is a replacement part for a variety of Whirlpool washing machines. It is a spring that is used to help keep the lid of the washing machine closed. The spring is made from metal and has a black finish. It measures approximately 2 inches in length and 1 inch in...

The Whirlpool STOP-RACK Part# WP99002135 is a dishwasher rack stop that is used to secure the dishwasher rack in place. It is designed to fit most Whirlpool dishwashers and is made of durable plastic. The STOP-RACK helps to keep the dishwasher rack from sliding out of place during operation. It al...

Whirlpool STRIP-WHE Part# WP99002072 is a replacement part for Whirlpool washing machines. It is a drive belt that connects the motor to the transmission and helps to turn the agitator during the wash cycle. The belt is made of rubber and measures 4 ribbed grooves, 5/16" wide and 95-1/2" long. Thi...

The Whirlpool SWITCH-WA Part# WP99002560 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the water level in the washer. The switch has three positions: low, medium, and high. When the switch is in the low position, the washer will fill with a low a...

Whirlpool Tine-Row Part# WP99002138 is a replacement part for Whirlpool dishwashers. It is a plastic tine row that fits into the lower dishrack of the dishwasher. The tine row has four rows of tines that are used to hold dishes in place during the washing cycle. The tines are made of durable plast...

Whirlpool Track - Part# WPY912545 is a replacement part for Whirlpool dryers. It is a metal track that runs along the back of the dryer drum and helps to keep the drum in place. The track is made of durable steel and is designed to last for many years. It also helps to reduce noise and vibration f...

The Whirlpool VALVE-WAT Part# WP99001359 is a water valve used in many Whirlpool washing machines. It is a two-way valve that controls the flow of water into and out of the washing machine. The valve has two ports, one for the hot water supply and one for the cold water supply. The valve also has ...

The Whirlpool WHEEL (Part# WP903093) is a replacement part for Whirlpool washers. It is a plastic wheel that fits onto the agitator of the washer and helps to move the clothes around during the wash cycle. The wheel is made of durable plastic and is designed to last for many years. It can be used ...

The Whirlpool WHEEL - Part# WP99002106 is a replacement part for Whirlpool washing machines. It is a wheel that helps to support the agitator in the washer. The wheel is made of durable plastic and measures approximately 3 inches in diameter. It has a hub with four spokes that fit into the agitato...