Model: DCVH660GH0MS

GE Connector Motor Part# WE1M650 is a direct drive motor designed to be used in a variety of applications. It is a single-phase, permanent split capacitor (PSC) motor with a 1/2 HP rating and a maximum speed of 1725 RPM. The motor features an open drip proof (ODP) enclosure and is designed for use...

GE Door Gasket Part# WE9M19 is a replacement part for GE dryers. It is a flexible rubber gasket that fits around the door opening of the dryer to create an airtight seal. This helps to keep hot air from escaping and helps to ensure that the dryer runs efficiently. The gasket also helps to reduce n...

GE Filter Asm - Part# WE18M24 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric dryers. This part is made of metal and plastic and is used to filter lint from the air inside the dryer. It helps to keep the dryer running efficiently and prevents lint buildup i...

The GE GAS VALVE & PIPE ASM. NG - Part# WE14M114 is a gas valve and pipe assembly designed for use with natural gas appliances. It is used to control the flow of natural gas to the appliance, and it includes a valve, pipe, and fittings. The valve is designed to shut off the flow of gas when the ap...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Blower Wheel - Part# WE16M15 is a replacement part for clothes dryers. It is a wheel that is used to circulate air within the dryer, helping to evenly distribute heat and moisture throughout the drum. The wheel is made of durable ...

GE HEAT DET ASM - Part# WE4X448 is a replacement part for a General Electric dryer. It is the assembly that contains the heat detector, which is responsible for monitoring the temperature of the dryer and shutting it off when it reaches a certain level. The assembly includes the heat detector, two...

GE Levelling Screw Gray - Part# WE1M642 is a part used in washing machines to level the machine. It is a plastic screw with a metal thread and is used to adjust the height of the washing machine. The screw has a hex head and can be adjusted using a hex key or screwdriver. The screw is gray in colo...

The GE Lock Button (Part# WE1M562) is a replacement part for a variety of GE dryers. It is used to lock the door of the dryer in place when it is not in use. The button is made of plastic and has a small metal spring inside that helps keep the door closed. The button is easy to install and require...

The GE Rear Bracket Level Leg - Part# WE1M528 is a part used in some GE dryers. It is a metal bracket that attaches to the back of the dryer and helps to level the machine. The bracket has two adjustable legs that can be adjusted to fit different floor heights. The legs are made of metal and have ...

GE Screw #8 X 5/8 Ss Door H - Part# WE1M582 is a stainless steel door hinge screw manufactured by General Electric. It is a #8-32 x 5/8 inch long, self-tapping screw with a Phillips head. The screw is designed to be used with GE door hinges and other door hardware. It is made of stainless steel fo...

GE Sensor Rods, Part# WE1M575, are a type of linear position sensor designed to measure the displacement of a moving object. They are commonly used in industrial applications such as machine tools, robotics, and automated assembly lines. The sensor rod consists of a stainless steel rod with an emb...

The GE Strike Plate with Strike Hole (Part# WE1M570) is a strike plate designed to be used with a door latch or deadbolt. It is made of steel and has a hole in the center for the latch or deadbolt to fit through. The strike plate is designed to reinforce the door jamb and provide additional securi...

GE THERMISTOR Part# WE4M336 is a temperature sensing device used to measure the temperature of an environment or object. It is a thermistor, which is a type of resistor that changes its resistance with changes in temperature. The GE THERMISTOR Part# WE4M336 has a resistance range of 10K ohms at 25...

GE THERMO is a thermostat manufactured by General Electric. It is a digital, programmable thermostat that allows users to control the temperature of their home or office. The GE THERMO Part# WE4M80 is a single-stage, non-programmable thermostat that features an easy-to-read LCD display and simple ...

GE TOP BEARING ASM - Part# WE14M124 is a top bearing assembly manufactured by General Electric. It is used in various types of appliances such as washing machines, dryers, and refrigerators. The part number WE14M124 is a genuine OEM (Original Equipment Manufacturer) part and is designed to fit spe...

GE TRAP DUCT COMPLETE ASM - Part# WE14M119 is a complete assembly for a dryer vent trap. It includes the vent trap, the connecting duct, and all necessary hardware. The vent trap is designed to capture lint and other debris that may be present in the dryer exhaust air. The connecting duct allows f...

The GE T-STAT OUTLET BKUP ORG Part# WE4M300 is a backup outlet that provides an extra outlet for use with a thermostat. This outlet is designed to be used in conjunction with a thermostat to provide an additional outlet for powering other devices such as fans, humidifiers, dehumidifiers, and other...

The GE USER INTERFACE BOARD ASM - Part# WE4M385 is a user interface board assembly designed for use with General Electric (GE) dryers. It is a replacement part for the original user interface board in the dryer. The board is responsible for controlling the operation of the dryer, including tempera...