Model: DCCB330EG4WC

GE Baffle Part# WE14M75 is a replacement part for a range hood. It is designed to fit GE and Hotpoint range hoods and is made of stainless steel. The baffle helps to direct the air flow from the fan, preventing grease and smoke from escaping into the kitchen. It also helps to reduce noise levels f...

GE Bearing Slide White - Part# WE1M504 is a white bearing slide manufactured by General Electric. It is designed to provide smooth, quiet operation and long-lasting performance in a variety of applications. The bearing slide is made from high-grade steel and features a self-lubricating design that...

GE Bracket & Level Leg Assembly (Part# WE1M773) is a part used in GE dryers. It is a metal bracket and leg assembly that helps to level the dryer and keep it stable. The bracket attaches to the back of the dryer and the legs attach to the floor. The legs are adjustable so that you can raise or low...

GE Coil Support Part# WE1M452 is a replacement part for GE dryers. It is a plastic support that holds the dryer's heating element in place. The support helps to keep the heating element from moving around and becoming damaged. It also helps to ensure that the heating element is properly aligned wi...

GE Connector Motor Part# WE1M650 is a direct drive motor designed to be used in a variety of applications. It is a single-phase, permanent split capacitor (PSC) motor with a 1/2 HP rating and a maximum speed of 1725 RPM. The motor features an open drip proof (ODP) enclosure and is designed for use...

GE Door Latch - Part# WH42X2507 is a replacement part for General Electric washing machines. It is used to secure the door of the washing machine and keep it closed during operation. The latch is made of plastic and has two parts: a latch and a strike plate. The latch has two prongs that fit into ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer High Limit Safety Thermostat (Part# WE4M137) is a safety device that is designed to protect the dryer from overheating. It is located inside the dryer and monitors the temperature of the air inside the drum. If the temperature get...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Terminal Block & Ground Strap - Part# WE4M325 is a replacement part for dryers. It is used to connect the electrical wiring to the dryer. The terminal block is a plastic block with metal terminals that are used to connect the wire...

GE P.B. SWITCH - Part# WE4M210 is a push button switch manufactured by General Electric (GE). It is a single pole, double throw (SPDT) switch with a normally open and normally closed contact configuration. The switch has a black plastic body and two red push buttons. It is rated for 15A at 125/250...

GE Retainer Brg Part# WE1M300 is a General Electric-branded bearing retainer. It is designed to hold bearings in place and provide support for the bearing during operation. The retainer is made of high-grade steel and features a corrosion-resistant coating for long-term durability. The part number...

GE Screw - Part# WE2M163 is a dryer drum drive belt tensioner roller. It is a replacement part for General Electric (GE) dryers. This part helps to keep the drum drive belt tight and prevents it from slipping off the motor pulley. The roller is made of plastic and has two metal arms that attach to...

GE SCREW - Part# WE2M173 is a part manufactured by General Electric (GE). It is a self-tapping screw made of steel and is used to secure two or more objects together. The screw has a pan head with a Phillips drive and is 1/4 inch in diameter. It has a thread pitch of 20 threads per inch and is 2 i...

GE Screw # 10 - Part# WE2M174 is a type of self-tapping screw manufactured by General Electric. It is a #10-24 thread size, 1/4 inch long, and has a flat head with a Phillips drive. The screw is made from steel and has a zinc plated finish for corrosion resistance. This type of screw is commonly u...

GE SCREW #8 - Part# WE2M196 is a type of screw manufactured by General Electric. It is a self-tapping, hex head screw with a #8 diameter and a 1/2 inch length. The screw is made from steel and has a zinc plated finish for corrosion resistance. It is designed for use in applications such as mountin...

GE SLIDE(GREEN) is a part number WE1M415, which is a replacement dryer drum slide. It is made of green plastic and is used to support the front of the dryer drum as it rotates. The slide helps reduce friction between the drum and the cabinet, allowing for smoother operation. It also helps keep the...

GE THERM Part# WE4M160 is a thermostat designed to control the temperature of a room or area. It is a digital, programmable thermostat that can be used to regulate the temperature in both residential and commercial settings. The thermostat has an easy-to-read LCD display and allows users to set up...

GE Thermostat Outlet Biased - Part# WE4M311 is a thermostat outlet that is designed to be used with GE-branded electric water heaters. This outlet is designed to control the temperature of the water in the tank, allowing you to set a desired temperature and maintain it. The outlet features a built...

GE TOP BEARING - Part# WE3M26 is a top bearing designed for use with General Electric (GE) washing machines. It is a replacement part for the original bearing that came with the machine. The bearing is made of high-quality materials and is designed to provide years of reliable service. It features...

A resistor is an electrical component that limits or regulates the flow of electrical current in a circuit. The resistor (3500 ohm) beige - Part# WE4M307 is a four-band, axial leaded, non-inductive resistor with a resistance value of 3500 ohms. It has a beige body and is marked with the part numbe...