Model: DBVH512EF3WW

The Fisher & Paykel Drum Slide (Green) - Part# WE1M507 is a replacement part for Fisher & Paykel washing machines. It is a green plastic drum slide that fits into the bottom of the washing machine drum and helps to support the weight of the drum. The slide also helps to reduce noise and vibration ...

The GE "O" Ring - Part# WE1M461 is a replacement part for a variety of GE appliances. It is an O-ring, which is a type of gasket that is used to create a seal between two surfaces. The O-ring is made of rubber and has an inner diameter of 1/4 inch and an outer diameter of 3/8 inch. It is designed ...

GE Baffle Part# WE14M75 is a replacement part for a range hood. It is designed to fit GE and Hotpoint range hoods and is made of stainless steel. The baffle helps to direct the air flow from the fan, preventing grease and smoke from escaping into the kitchen. It also helps to reduce noise levels f...

GE Bearing Slide White - Part# WE1M504 is a white bearing slide manufactured by General Electric. It is designed to provide smooth, quiet operation and long-lasting performance in a variety of applications. The bearing slide is made from high-grade steel and features a self-lubricating design that...

GE Bracket & Level Leg Assembly (Part# WE1M773) is a part used in GE dryers. It is a metal bracket and leg assembly that helps to level the dryer and keep it stable. The bracket attaches to the back of the dryer and the legs attach to the floor. The legs are adjustable so that you can raise or low...

GE Coil Support Part# WE1M452 is a replacement part for GE dryers. It is a plastic support that holds the dryer's heating element in place. The support helps to keep the heating element from moving around and becoming damaged. It also helps to ensure that the heating element is properly aligned wi...

GE Connector Motor Part# WE1M650 is a direct drive motor designed to be used in a variety of applications. It is a single-phase, permanent split capacitor (PSC) motor with a 1/2 HP rating and a maximum speed of 1725 RPM. The motor features an open drip proof (ODP) enclosure and is designed for use...

GE Door Gasket Part# WE9M19 is a replacement part for GE dryers. It is a flexible rubber gasket that fits around the door opening of the dryer to create an airtight seal. This helps to keep hot air from escaping and helps to ensure that the dryer runs efficiently. The gasket also helps to reduce n...

GE Filter Asm - Part# WE18M24 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric dryers. This part is made of metal and plastic and is used to filter lint from the air inside the dryer. It helps to keep the dryer running efficiently and prevents lint buildup i...

The GE General Electric Hotpoint PartsIPS Kenmore Dryer Rear Sleeve Bearing, Part# WE1M462, is a replacement part for dryers. It is a sleeve bearing that fits in the rear of the dryer and helps to support the drum. The bearing helps to reduce friction between the drum and the rear wall of the drye...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer High Limit Safety Thermostat (Part# WE4M137) is a safety device that is designed to protect the dryer from overheating. It is located inside the dryer and monitors the temperature of the air inside the drum. If the temperature get...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Terminal Block & Ground Strap - Part# WE4M325 is a replacement part for dryers. It is used to connect the electrical wiring to the dryer. The terminal block is a plastic block with metal terminals that are used to connect the wire...

The GE Heater Element & Housing Assembly (Part# WE11M23) is a replacement part for many GE dryers. It is an assembly that includes the heating element, housing, and mounting bracket. The heating element is a coiled wire that produces heat when electricity passes through it. The housing holds the h...

The GE Lock Button (Part# WE1M562) is a replacement part for a variety of GE dryers. It is used to lock the door of the dryer in place when it is not in use. The button is made of plastic and has a small metal spring inside that helps keep the door closed. The button is easy to install and require...

GE Retainer Brg Part# WE1M300 is a General Electric-branded bearing retainer. It is designed to hold bearings in place and provide support for the bearing during operation. The retainer is made of high-grade steel and features a corrosion-resistant coating for long-term durability. The part number...

GE Screw - Part# WE2M163 is a dryer drum drive belt tensioner roller. It is a replacement part for General Electric (GE) dryers. This part helps to keep the drum drive belt tight and prevents it from slipping off the motor pulley. The roller is made of plastic and has two metal arms that attach to...

GE Screw # 10 - Part# WE2M174 is a type of self-tapping screw manufactured by General Electric. It is a #10-24 thread size, 1/4 inch long, and has a flat head with a Phillips drive. The screw is made from steel and has a zinc plated finish for corrosion resistance. This type of screw is commonly u...

GE THERM Part# WE4M160 is a thermostat designed to control the temperature of a room or area. It is a digital, programmable thermostat that can be used to regulate the temperature in both residential and commercial settings. The thermostat has an easy-to-read LCD display and allows users to set up...

GE THERMISTOR Part# WE4M336 is a temperature sensing device used to measure the temperature of an environment or object. It is a thermistor, which is a type of resistor that changes its resistance with changes in temperature. The GE THERMISTOR Part# WE4M336 has a resistance range of 10K ohms at 25...

GE TOP BEARING ASM - Part# WE14M124 is a top bearing assembly manufactured by General Electric. It is used in various types of appliances such as washing machines, dryers, and refrigerators. The part number WE14M124 is a genuine OEM (Original Equipment Manufacturer) part and is designed to fit spe...

GE TRAP DUCT COMPLETE ASM - Part# WE14M119 is a complete assembly for a dryer vent trap. It includes the vent trap, the connecting duct, and all necessary hardware. The vent trap is designed to capture lint and other debris that may be present in the dryer exhaust air. The connecting duct allows f...

The GE T-STAT OUTLET BKUP ORG Part# WE4M300 is a backup outlet that provides an extra outlet for use with a thermostat. This outlet is designed to be used in conjunction with a thermostat to provide an additional outlet for powering other devices such as fans, humidifiers, dehumidifiers, and other...

The GE USER INTERFACE BOARD ASY - Part# WE4M387 is a user interface board assembly for General Electric (GE) dryers. It is a replacement part for many GE dryer models and is used to control the operation of the dryer. The board includes a display, buttons, and LED indicators that allow users to se...