Model: CWB713P2N2S1

The GE Brushed Copper Handle W/ Caf - Part# WB15X33368 is a replacement handle for GE Cafe series dishwashers. This handle is made of brushed copper and features a sleek, modern design. It is designed to fit perfectly on the door of your dishwasher, providing a secure and comfortable grip when ope...

GE CANOPY MICA is a replacement part for GE microwaves. It is a flat, round piece of mica that fits over the heating element in the microwave. The mica helps to protect the heating element from damage and helps to evenly distribute heat throughout the cooking chamber. The part number WB06X10638 is...

GE Digitron Part# WB27X10856 is a digital control board for GE ovens. It is designed to replace the original control board in GE ovens and ranges. The board controls the temperature, bake, broil, and clean functions of the oven. It also includes a timer and clock display. The board has a digital d...

GE Duct Asm - Part# WB34X32594 is a genuine OEM (Original Equipment Manufacturer) part manufactured by GE. It is a duct assembly for a range hood or microwave oven. The assembly includes the vent duct, damper, and mounting hardware. The damper helps to regulate the amount of air that is drawn thro...

GE FUSE Part# WB27X10928 is a genuine OEM (Original Equipment Manufacturer) replacement part for GE Microwave Ovens. It is a thermal fuse that is used to protect the oven from overheating. The fuse will open if the temperature exceeds a certain level, cutting off power to the oven and preventing i...

GE Holder ASM - Part# WB06X10646 is a part used in some GE microwaves. It is a holder assembly that is used to secure the turntable motor and drive shaft to the microwave chassis. The holder assembly includes two plastic clips, one metal clip, and four screws. The clips are used to secure the moto...

GE Installation Hardware - Part# WB01X32574 is a set of hardware components used to install a range of GE appliances. This includes screws, nuts, bolts, washers, and other necessary items for installation. The hardware is designed to be compatible with a variety of GE appliances, including ranges,...

GE KNOB ASM - Part# WB03X10281 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that includes the knob, the shaft, and the mounting hardware. The knob is used to control the temperature of the oven and has a black finish with white markings. The shaft is made of m...

The GE MAGNETRON - Part# WB26X32629 is a microwave oven component that produces the microwaves used to cook food. It is a high-voltage device that converts electrical energy into microwave energy. The magnetron consists of a cylindrical metal chamber with an electromagnet in the center. Electrons ...

The GE Motor Turntable Part# WB26X10193 is a replacement part for many GE microwave ovens. It is a motorized turntable that rotates the food inside the microwave oven to ensure even cooking. The motor is connected to the turntable tray and spins it at a constant speed. This helps to evenly distrib...

GE Motor(Circ) Circulation - Part# WB26X10182 is a motor used in some GE dishwashers. It is responsible for circulating the water throughout the dishwasher during the wash cycle. The motor circulates the water by spinning a fan blade, which pushes the water through the spray arms and into the dish...

GE Plate Bottom - Part# WB07X32843 is a replacement part for GE microwaves. It is the bottom plate that sits beneath the turntable and provides support for the turntable. This part is made of metal and is approximately 12 inches in diameter. It has a hole in the center to allow for the turntable t...

GE Rotating Ring Assembly (Part# WB06X10651) is a replacement part for GE microwave ovens. It is a metal ring that rotates inside the microwave cavity to help evenly distribute heat and cook food more evenly. The rotating ring assembly helps to ensure that the food is cooked evenly throughout, and...

GE SCREW - Part# WB01X10121 is a replacement part for various GE appliances. It is a screw that is used to secure the top of the control panel to the cabinet. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of metal. This part is used in many GE...

GE Shaft Assembly Part# WB06X10693 is a replacement part for many GE microwave ovens. It is a part of the turntable motor assembly and is responsible for rotating the turntable inside the oven. The shaft assembly consists of a plastic hub, a metal shaft, and two bearings. The hub attaches to the m...

GE Switch Monitor Interlock - Part# WB24X25397 is a safety device used to prevent the accidental opening of an electrical circuit. It is designed to be installed between the switch and the load, and it monitors the current flowing through the circuit. If the current exceeds a certain threshold, th...

GE Thermostat Part# WB20X10048 is a digital thermostat designed to control the temperature in your home. It features a large, easy-to-read LCD display and simple push-button controls. The thermostat can be programmed to maintain a comfortable temperature throughout the day and night, and it also h...

GE Thermostat Part# WB21X10149 is a digital thermostat designed to control the temperature in your home. It is a single-stage, non-programmable thermostat that can be used with most heating and cooling systems. The thermostat has a large, easy-to-read LCD display and simple push button controls. I...

GE Top Cover - Part# WB06X32851 is a replacement part for a range of GE ovens. It is the top cover of the oven, which helps to protect the interior components from dust and debris. The top cover also helps to keep heat in the oven, which can help to improve cooking performance. This part is made o...

GE Tray Glass - Part# WB49X10166 is a replacement part for GE ovens. It is a glass tray that fits into the bottom of the oven and is used to catch any spills or splatters that may occur during cooking. The tray is made of tempered glass and measures approximately 16-3/4 inches by 12-1/2 inches. It...

GE Trim Lh - Part# WB07X32627 is a trim piece for a GE microwave. It is a left-hand side trim piece that is used to cover the gap between the microwave and the wall or cabinet. The trim piece is made of stainless steel and has a brushed finish. It measures approximately 4 inches wide by 1 inch hig...

GE Trim Rh - Part# WB07X32622 is a trim part for a range hood. It is made of plastic and is used to cover the gap between the range hood and the wall. The trim part is designed to fit GE brand range hoods and has a white finish. It measures approximately 4 inches wide by 1 inch high and comes with...

The Transformer High Voltage - Part# WB17X10030 is a high voltage transformer used in many different types of appliances. It is typically used to convert the incoming line voltage from the wall outlet into a lower voltage that can be used by the appliance. This transformer is designed to provide a...