Model: CVM517P4M1W2

GE ASM HOOD DAMPER - Part# WB06X10920 is a replacement part for GE range hoods. It is a damper assembly that helps to regulate the air flow in the range hood. The damper assembly consists of a plastic frame, two metal arms, and a spring-loaded damper blade. The frame attaches to the range hood and...

GE ASM-MAGNETRON - Part# WB27X10939 is a replacement part for GE microwave ovens. It is a magnetron, which is the component of a microwave oven that produces the microwaves used to cook food. The magnetron is an electronic device that converts electrical energy into microwaves. It consists of a cy...

GE BLADE FAN - Part# WB02X20626 is a replacement fan blade for GE microwave ovens. It is made of durable plastic and measures approximately 8 inches in diameter. The fan blade is designed to circulate air within the oven cavity, helping to evenly distribute heat and maintain a consistent temperatu...

GE COVER MGT - Part# WB02X27042 is a replacement part for GE range hoods. It is a metal cover that fits over the fan motor and helps to protect it from dust and debris. The cover also helps to reduce noise from the fan motor. This part is designed to fit specific models of GE range hoods, so it is...

The GE END CAP DOOR (BLACK) - Part# WB06X10947 is a replacement part for GE microwaves. It is a black plastic end cap door that fits over the end of the microwave door frame. The end cap door helps to keep the microwave door closed and secure, and it also helps to protect the interior of the micro...

GE Hardware ASM - Part# WB06X29773 is a replacement part for GE microwaves. It is a mounting plate assembly that is used to secure the microwave to the wall or cabinet. The assembly includes the mounting plate, screws, and other hardware needed to install the microwave. This part is designed for u...

GE LATCH BODY - Part# WB10X27044 is a replacement part for GE ovens. It is the latch body that holds the door closed when the oven is in use. The latch body is made of metal and has two screws that attach it to the oven door. It also has a spring-loaded mechanism that allows the door to open and c...

GE MAGNETRON TCO - Part# WB24X29270 is a replacement part for GE microwave ovens. It is a magnetron tube control (TCO) that controls the power output of the magnetron tube. The TCO is responsible for regulating the voltage and current to the magnetron tube, which in turn produces microwaves. The T...

The GE MAGNETRON THERMOSTAT - Part# WB24X26784 is a thermostat designed to control the temperature of a microwave oven. It is a replacement part for GE microwaves and is made to fit specific models. The thermostat monitors the temperature inside the oven and turns off the power when it reaches a c...

The GE Main Board - Part# WB27X29754 is a replacement main board for select GE ovens. It is a printed circuit board that controls the functions of the oven, such as temperature, timer, and other settings. The board is designed to replace the original main board in GE ovens and can be used to repai...

The GE Microwave LED Board - Part# WB02X26814 is a replacement part for certain GE microwaves. It is a circuit board that contains the LED lights that are used to indicate the status of the microwave, such as when it is in use or when it has finished cooking. The board also contains other componen...

The GE Microwave Rack Support - Part# WB02X27051 is a replacement part for a GE microwave. It is used to support the microwave rack and keep it in place. The part is made of metal and has two holes for mounting screws. It measures approximately 3 inches long by 1 inch wide. This part is compatible...

The GE Microwave Rotating Ring (Part# WB02X27043) is a replacement part for GE microwaves. It is a round, metal ring that sits inside the microwave and rotates when the microwave is in use. The rotating ring helps to evenly distribute heat throughout the food being cooked in the microwave. The rot...

A GE Microwave Timing Belt (Part# WB02X27021) is a replacement part for certain GE microwave ovens. It is a rubber belt that connects the motor to the turntable drive shaft, and it helps to keep the turntable spinning at a consistent speed. The belt is made of durable rubber and is designed to las...

GE Noise Filter ASM - Part# WB02X27056 is a noise filter assembly designed to reduce the amount of electrical interference caused by motors, pumps, and other appliances. This noise filter is designed to be used with GE Profile and GE Monogram refrigerators. It helps to reduce the amount of electri...

GE NUT-MOUNTING - Part# WB01X27055 is a mounting nut used to secure the mounting bracket to the wall. It is designed for use with select GE microwaves and is made of metal for durability. The nut has a threaded hole in the center and two tabs on either side that fit into slots in the mounting brac...

GE Plate Mounting ASM - Part# WB56X10446 is a part used in many GE microwaves. It is a mounting plate assembly that is used to secure the microwave to the wall or cabinet. The plate consists of two metal plates that are connected by four screws. The plates have holes in them that allow for the scr...

GE Sensor Temp - Part# WB02X27046 is a temperature sensor designed for use in GE refrigerators. It is a thermistor-type temperature sensor that measures the temperature inside the refrigerator and sends a signal to the main control board. The main control board then uses this signal to adjust the ...

GE TCO - BOTTOM - Part# WB21X10162 is a replacement part for the bottom tray of a GE oven. This part is made of metal and is designed to fit the bottom of the oven. It helps to keep food from spilling out onto the floor when cooking. The part also helps to keep the oven clean and free from grease ...

GE Thermo Switch Part# WB27X709 is a thermal switch designed to protect electric motors from overheating. It is a single-pole, double-throw (SPDT) switch that is normally open until the temperature reaches a preset level. When the temperature reaches the preset level, the switch closes and trips t...

GE Thermostat Asm W/ Brkt - Part# WB24X26785 is a thermostat assembly with bracket manufactured by General Electric (GE). It is used in many GE appliances, including refrigerators, ovens, and dishwashers. The thermostat assembly includes a temperature sensor, a control knob, and a bracket for moun...

GE TRANS H.V - Part# WB27X10910 is a high voltage transformer manufactured by General Electric. It is used in many appliances such as microwaves, ovens, and ranges. This transformer is designed to convert the incoming line voltage from 120 volts to a higher voltage of up to 2700 volts. This higher...

The GE Turntable Motor Part# WB26X10233 is a replacement part for many GE microwave ovens. It is a 120V, 60Hz, 0.8A motor that rotates the turntable in the microwave oven. The motor is designed to be mounted on the bottom of the microwave oven and has two mounting holes for easy installation. The ...