Model: CT19G6FW

Maytag PIN - Part# 61002104 is a part used in Maytag washers and dryers. It is a plastic pin that fits into the back of the washer or dryer to secure the drum in place. The pin is made of durable plastic and measures approximately 1/2 inch in diameter. It is used to keep the drum from shifting dur...

Maytag PLUG, WHT - Part# 61001795 is a replacement part for Maytag appliances. It is a white plug that fits into the back of the appliance and connects to the power cord. The plug is made of durable plastic and is designed to fit securely into the appliance's power outlet. This part is compatible ...

Maytag SCREW - Part# 61005388 is a replacement part for Maytag washing machines. It is a metal screw that is used to secure the agitator to the transmission in the washer. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of steel. This part helps...

Maytag SCREW - Part# 61005394 is a replacement part for Maytag washing machines. It is a Phillips head screw that is used to secure the top panel of the washer to the cabinet. The screw measures approximately 1/2 inch in length and has a diameter of 4mm. It is made of metal and has a zinc plated f...

The Maytag SWITCH, LIGHT - Part# 61006075 is a replacement part for a range of Maytag appliances. It is a two-position switch that controls the light in the oven cavity. The switch has two terminals and is made of plastic. It is used to turn the oven light on and off. This part is compatible with ...

The Maytag WASHER, CENTER HINGE - Part# 61002231 is a replacement part for Maytag washers. It is a center hinge that attaches the top and bottom of the washer together. This part is made of durable plastic and metal and is designed to last for many years. The center hinge helps keep the washer doo...

The Maytag WHEEL - Part# 61003826 is a replacement part for a variety of Maytag washing machines. It is a plastic wheel that is used to turn the agitator in the washer. The wheel has two mounting holes and is made of durable plastic. It measures approximately 4 inches in diameter and 1 inch in wid...

The Whirlpool CAPACITOR - Part# WP65889-4 is a single-phase, three-wire capacitor designed for use in air conditioners and other motor applications. It is rated at 5 MFD (microfarads) and 440 volts. The capacitor is designed to help the motor start and run more efficiently by providing a steady cu...

The Whirlpool END CAP- S - Part# WP61002112 is a replacement part for Whirlpool dishwashers. It is an end cap that is used to cover the end of the dishwasher tub and provide a finished look. The end cap is made of plastic and has a white finish. It measures approximately 3 inches in length and 1 i...

Whirlpool HARNS-WIRE Part# WP61001882 is a wiring harness for Whirlpool appliances. It is used to connect the electrical components of the appliance to the main power source. The wiring harness includes a 4-wire cord, which connects to the appliance's power source, and two wires that connect to th...

The Whirlpool HEATER-DE Part# WP61002045 is a high-efficiency electric water heater designed to provide hot water for residential and commercial applications. This unit features a 6-year limited tank and parts warranty, as well as a 1-year in-home labor warranty. It has an energy factor of 0.95, m...

The Whirlpool MOTOR-EVAP (Part# WP61004888) is a motor and evaporator assembly for refrigerators. It is designed to circulate air through the refrigerator and freezer compartments, allowing them to maintain the desired temperature. The motor-evap assembly includes a fan blade, evaporator fan motor...

The Whirlpool PIN-LOWER Part# WP61001925 is a part used in many Whirlpool dishwashers. It is a plastic pin that is used to secure the lower dishrack to the dishwasher tub. The pin is inserted into the lower dishrack and then into the hole in the tub. This part helps keep the lower dishrack from mo...

The Whirlpool Pin-Wheel, Part# WP61002104, is a replacement part for Whirlpool dishwashers. It is a small plastic wheel with several pins on it that helps to agitate the dishes during the wash cycle. The pin-wheel is connected to the motor shaft and spins when the motor runs. The pins on the wheel...

Whirlpool SEAL- F.F. - Part# WP61004008 is a replacement part for Whirlpool washing machines. It is a foam seal that fits between the front panel and the tub of the washing machine. This seal helps to keep water from leaking out of the washer during operation. The seal also helps to reduce noise a...

Whirlpool Seal-Frz Part# WP61004007 is a replacement part for Whirlpool refrigerators. It is a freezer door gasket seal that helps to keep the cold air in and the warm air out. The seal is made of durable vinyl material and is designed to fit around the edges of the freezer door. It helps to ensur...

The Whirlpool THERMOSTAT - Part# WP61005254 is a thermostat designed to control the temperature of a room or area. It is a digital, programmable thermostat that can be used to set and maintain the desired temperature in the room or area. The thermostat has an easy-to-read LCD display and can be pr...

The Whirlpool Timer-DEF Part# WP68233-3 is a replacement timer for Whirlpool dryers. It is a mechanical timer that controls the amount of time the dryer runs. The timer has two knobs, one for the cycle time and one for the delay start. The cycle time knob sets the amount of time the dryer will run...

The Whirlpool VALVE-INLT - Part# WP61005273 is a water inlet valve for a washing machine. It is used to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when activated by ...