Model: CHW9150GW0

Whirlpool BELT - Part# WPW10260319 is a replacement drive belt for Whirlpool washers. It is made of rubber and measures approximately 4 feet in length. This belt is used to connect the motor to the transmission, allowing the washer to spin and agitate. It is an OEM (Original Equipment Manufacturer...

Whirlpool BOLT Part# WPW10137319 is a replacement part for Whirlpool washers. It is a plastic bolt that secures the agitator to the transmission shaft. This part is made of durable plastic and is designed to fit most Whirlpool washers. The bolt measures approximately 1-1/2 inches in length and has...

The Whirlpool Cap - Part# W10018050 is a replacement part for Whirlpool washers. It is a plastic cap that fits over the top of the agitator in the washer tub. The cap helps to keep water from splashing out of the washer during the wash cycle. It also helps to keep dirt and debris from entering the...

Whirlpool Cntrl-Elec - Part# WPW10384849 is a replacement electronic control board for Whirlpool washing machines. It is used to replace the original control board in Whirlpool washers that have stopped working due to a faulty control board. This part is designed to fit specific Whirlpool manufact...

The Whirlpool Console - Part# W10779084 is a console designed to be used with Whirlpool washers and dryers. It is a replacement part for the original console that came with the appliance. The console is made of durable plastic and features a control panel with LED lights, buttons, and knobs for co...

The Whirlpool Counterweight (Part# WPW10200747) is a replacement part for some Whirlpool washing machines. It is a metal weight that is used to balance the drum during the spin cycle. The counterweight helps to reduce vibration and noise, as well as keep the drum from moving around too much during...

The Whirlpool Counterweight (Part# WPW10223198) is a replacement part for Whirlpool washing machines. It is used to balance the load in the washer during the spin cycle. The counterweight helps to reduce vibration and noise during the spin cycle, and it also helps to keep the washer from moving ar...

Whirlpool Cover - Part# WPW10137460 is a replacement part for Whirlpool washers. It is a white plastic cover that fits over the top of the washer to protect it from dust and debris. The cover also helps to keep the washer looking neat and tidy. It is designed to fit most Whirlpool washers, includi...

The Whirlpool Door Part# WPW10298953 is a replacement door for a variety of Whirlpool refrigerator models. This door is made of stainless steel and has a white finish. It features an adjustable top hinge, allowing you to adjust the height of the door to fit your refrigerator model. The door also i...

Whirlpool DOOR-GLASS - Part# WPW10388315 is a replacement part for Whirlpool ovens. It is the glass panel that covers the oven door. This part is made of tempered glass and is designed to fit specific Whirlpool models. It measures approximately 20 inches by 14 inches and has a black frame around i...

Whirlpool FEET-LVLNG - Part# W10245373 is a leveling foot kit designed for use with Whirlpool brand washers and dryers. The kit includes four adjustable feet, two for the front of the appliance and two for the back. The feet are adjustable to ensure that the appliance is level and stable on any su...

The Whirlpool Filter - Part# W10391445 is a refrigerator water filter that is designed to reduce chlorine taste and odor, as well as sediment, from your drinking water. It also helps to reduce lead, cysts, and other contaminants. This filter is compatible with many Whirlpool refrigerators and can ...

Whirlpool FRAME - Part# WPW10207904 is a part used in Whirlpool washing machines. It is the frame that holds the washer drum in place. The frame is made of metal and has four mounting holes on each side for attaching the drum to the frame. It also has two mounting holes on the top for attaching th...

The Whirlpool Handle (Part# WPW10137432) is a replacement part for a variety of Whirlpool dishwashers. This handle is made of durable plastic and is designed to fit the front of the dishwasher door. It has a white finish and features a recessed grip for easy opening and closing. The handle also in...

Whirlpool HARNS-WIRE is a part number for a wiring harness used in Whirlpool washing machines. This wiring harness is used to connect the electronic control board to the various components of the washing machine, such as the motor, water valve, and temperature sensors. The wiring harness includes ...

Whirlpool HARNS-WIRE Part# WPW10201879 is a replacement wire harness for Whirlpool dryers. This wire harness is used to connect the electronic control board to the various components in the dryer, such as the heating element, motor, and sensors. The wire harness consists of a set of colored wires ...

Whirlpool LATCH Part# WPW10375379 is a replacement part for Whirlpool washing machines. It is a plastic latch that attaches to the lid of the washing machine and helps keep it closed during operation. The latch is designed to be easy to install and use, and it can be used with both top-loading and...

Whirlpool Motor-Drive Part# WPW10171927 is a direct drive motor for Whirlpool washers. It is designed to replace the older belt-drive motors used in many Whirlpool washers. This motor is designed to be quieter and more efficient than the older belt-drive motors, as well as providing more power and...

The Whirlpool Pump-Water Part# WPW10730972 is a direct replacement for the original pump used in many Whirlpool washing machines. This pump is designed to move water from the washer tub to the drain hose, allowing the machine to complete its cycle. It is made of durable plastic and features a 1/2 ...

The Whirlpool Retainer Part# WPW10198458 is a part used in many Whirlpool washing machines. It is a plastic retainer that holds the inner tub of the washing machine in place. It is located on the back of the washer and attaches to the inner tub with two screws. The retainer helps to keep the inner...

Whirlpool SCREW - Part# W10246531 is a replacement part for Whirlpool washing machines. It is a Phillips head screw that is used to secure the agitator to the transmission shaft. The screw measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It is made of metal and has a zinc fi...

Whirlpool SCREW - Part# WPW10131119 is a replacement part for Whirlpool-brand appliances. It is a metal screw with a Phillips head and measures 1/4 inch in diameter by 1/2 inch in length. This screw is used to secure the door switch on Whirlpool-brand dishwashers, washing machines, and dryers. It ...

The Whirlpool Screw Part# WPW10137456 is a replacement part for many Whirlpool washing machines. It is a metal screw that is used to secure the agitator to the drive shaft of the washer. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of zinc-pl...

The Whirlpool Screw - Part# WPW10137457 is a replacement part for Whirlpool washing machines. It is a small, metal screw that is used to secure the top panel of the washing machine to the frame. The screw measures approximately 1/4 inch in diameter and is made of stainless steel. It has a Phillips...

Whirlpool SCREW - Part# WPW10259288 is a replacement part for Whirlpool washing machines. It is a genuine OEM part and is made of metal. This screw is used to secure the agitator to the transmission shaft in the washer. It measures approximately 1 inch in length and has a Phillips head. This part ...

Whirlpool SENSOR - Part# WPW10467289 is a temperature sensor used in Whirlpool refrigerators. It is a thermistor that measures the temperature inside the refrigerator and sends a signal to the control board to adjust the cooling system accordingly. The sensor is located in the evaporator cover nea...

Whirlpool SWITCH - Part# WPW10085220 is a replacement part for Whirlpool washers. It is a three-position switch that controls the water level, agitation speed, and spin speed of the washer. The switch has three positions: low, medium, and high. When the switch is in the low position, the washer wi...

Whirlpool SWITCH - Part# WPW10135255 is a replacement part for Whirlpool washing machines. It is a rotary switch that controls the water level, temperature, and agitation speed of the washer. The switch has three positions: low, medium, and high. It also has two terminals for connecting wires to t...

Whirlpool Switch-Vlt Part# WPW10131838 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the agitation, spin, and drain functions of the machine. The switch has three positions: agitate, spin, and drain. When the switch is in the agitate position, it...

Whirlpool SWITCH-WL - Part# WPW10448876 is a replacement part for Whirlpool washing machines. It is a rotary switch that controls the cycle selection, water temperature, and spin speed of the machine. The switch has four positions: Off, Normal, Permanent Press, and Delicate. It also has a timer kn...

Whirlpool TRAP Part# WPW10405608 is a drain trap assembly for Whirlpool washing machines. It is used to prevent sewer gases from entering the home through the washing machine drain. The trap includes a rubber gasket, plastic nut, and plastic elbow. The rubber gasket creates a seal between the drai...

The Whirlpool VALVE - Part# WPW10212596 is a replacement part for a variety of Whirlpool washing machines. It is a water inlet valve that controls the flow of water into the washer. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the...

The Whirlpool VALVE - Part# WPW10212598 is a water inlet valve for a washing machine. It is used to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when the washer is in ...