Model: CGT8000XQ0

Whirlpool BELT - Part# WP3405160 is a replacement drive belt for Whirlpool dryers. It is made of rubber and measures approximately 93 1/4 inches in length and 1/4 inch in width. This belt is used to connect the motor to the drum, allowing the drum to rotate when the motor is running. It helps to k...

Whirlpool BELT - Part# WPW10131172 is a replacement drive belt for Whirlpool washing machines. This belt is made of rubber and measures approximately 4.5 inches wide and 92.5 inches long. It is designed to fit specific Whirlpool manufactured washing machine models including: GHW9100LW0, GHW9150PW0...

Whirlpool BELT - Part# WPW10260319 is a replacement drive belt for Whirlpool washers. It is made of rubber and measures approximately 4 feet in length. This belt is used to connect the motor to the transmission, allowing the washer to spin and agitate. It is an OEM (Original Equipment Manufacturer...

The Whirlpool Bulkhead Part# 8565061 is a part used in many Whirlpool dishwashers. It is a plastic bulkhead that fits between the dishwasher tub and the door. It helps to keep water from leaking out of the dishwasher when it is running. The bulkhead also helps to keep the door from rattling when i...

Whirlpool BULKHEAD - Part# WPW10080170 is a genuine OEM replacement part for Whirlpool washers. It is a bulkhead panel that is used to secure the washer’s internal components and to provide access to the interior of the machine. The bulkhead panel is made of durable plastic and features a white fi...

Whirlpool BUMPER - Part# 238614 is a replacement part for Whirlpool dishwashers. It is a black rubber bumper that is used to cushion the dishwasher door when it is opened and closed. The bumper helps to reduce noise and vibration from the door slamming shut. It also helps to protect the dishwasher...

The Whirlpool Burner-Gas Part# WPW10135231 is a replacement gas burner for Whirlpool gas ranges. It is designed to fit most Whirlpool and KitchenAid gas ranges, including models with griddles. This burner has a durable construction and is made of stainless steel for long-lasting use. The burner ha...

The Whirlpool Cap - Part# W10018050 is a replacement part for Whirlpool washers. It is a plastic cap that fits over the top of the agitator in the washer tub. The cap helps to keep water from splashing out of the washer during the wash cycle. It also helps to keep dirt and debris from entering the...

Whirlpool Channel Part# WPW10266747 is a part used in Whirlpool washers. It is a plastic channel that helps to guide the water from the water inlet valve to the tub. The channel is designed to help keep the water flowing evenly and prevent it from splashing out of the washer. It also helps to redu...

Whirlpool CLAMP - Part# WP8540092 is a clamp used to secure the drain hose to the pump on Whirlpool washing machines. It is made of durable plastic and is designed to fit most Whirlpool washers. The clamp helps to prevent leaks and keep the drain hose in place. It is easy to install and comes with...

Whirlpool CLAMP - Part# WP8540108 is a replacement part for Whirlpool washing machines. It is a clamp that holds the drain hose in place and prevents it from slipping out of the drain outlet. The clamp is made of durable plastic and has a spring-loaded design that makes it easy to install and remo...

Whirlpool CLAMP - Part# WPW10217563 is a genuine OEM replacement part for Whirlpool washers. It is used to secure the drain hose to the pump. This clamp is made of metal and is designed to fit specific Whirlpool manufactured washer models including KitchenAid, Roper, Estate, and Kenmore. This part...

Whirlpool Cntrl-Elec - Part# WPW10384849 is a replacement electronic control board for Whirlpool washing machines. It is used to replace the original control board in Whirlpool washers that have stopped working due to a faulty control board. This part is designed to fit specific Whirlpool manufact...

The Whirlpool Collar Part# WPW10344699 is a replacement part for Whirlpool washers. It is a collar that fits around the agitator shaft and helps to secure the agitator to the washer tub. The collar is made of plastic and has two metal clips that attach it to the agitator shaft. It also has two hol...

The Whirlpool Counterweight (Part# WPW10200747) is a replacement part for some Whirlpool washing machines. It is a metal weight that is used to balance the drum during the spin cycle. The counterweight helps to reduce vibration and noise, as well as keep the drum from moving around too much during...

The Whirlpool Counterweight (Part# WPW10223198) is a replacement part for Whirlpool washing machines. It is used to balance the load in the washer during the spin cycle. The counterweight helps to reduce vibration and noise during the spin cycle, and it also helps to keep the washer from moving ar...

Whirlpool COVER - Part# WP8540268 is a replacement part for Whirlpool washing machines. It is a cover that fits over the top of the washing machine and helps to protect it from dust, dirt, and other debris. The cover is made of durable plastic and has a textured finish to help keep it looking new....

Whirlpool Cover - Part# WP8540399 is a replacement part for Whirlpool washing machines. It is a plastic cover that fits over the top of the washer and helps to protect it from dust, dirt, and other debris. The cover also helps to keep the washer clean and free from lint and other particles that ca...

Whirlpool CUTOFF-TML - Part# WP8573713 is a replacement part for Whirlpool washers. It is a thermal cutoff that is used to protect the motor from overheating. The thermal cutoff monitors the temperature of the motor and will shut off power to the motor if it gets too hot. This helps to prevent dam...

The Whirlpool Door Part# WPW10298953 is a replacement door for a variety of Whirlpool refrigerator models. This door is made of stainless steel and has a white finish. It features an adjustable top hinge, allowing you to adjust the height of the door to fit your refrigerator model. The door also i...

Whirlpool DOOR-GLASS - Part# WPW10387885 is a replacement part for Whirlpool brand refrigerators. It is the glass panel that covers the door of the refrigerator. This part is made of tempered glass and is designed to fit specific models of Whirlpool refrigerators. It measures approximately 20 inch...

The Whirlpool Drain Hose Extension 4' - Part# 285863 is a four-foot extension for the drain hose of a washing machine. It is designed to extend the length of the existing drain hose, allowing it to reach further into a sink or other drainage area. The extension is made from flexible plastic and ha...

Whirlpool DUCT-AIR - Part# 3394346 is a replacement air duct for Whirlpool dryers. It is made of durable plastic and measures approximately 4-1/2 inches in diameter and 12 inches in length. The air duct connects the blower wheel to the outside vent, allowing air to be drawn into the dryer and expe...

Whirlpool FEET-LVLNG - Part# W10245373 is a leveling foot kit designed for use with Whirlpool brand washers and dryers. The kit includes four adjustable feet, two for the front of the appliance and two for the back. The feet are adjustable to ensure that the appliance is level and stable on any su...

The Whirlpool Funnel (Part# WP8573824) is a replacement part for Whirlpool dishwashers. It is designed to help direct water and debris away from the dishwasher's filter and drain. The funnel is made of durable plastic and features a sloped design that helps to keep water flowing in the right direc...

Whirlpool GRILL-OUT Part# WPW10153412 is a replacement part for a Whirlpool gas grill. It is a stainless steel burner that measures 17-1/2 inches in length and has a diameter of 3-1/4 inches. The part number is used to identify the specific model of the burner and ensure compatibility with the gri...

The Whirlpool Handle - Part# WPW10112925 is a replacement handle for a variety of Whirlpool refrigerators. This handle is made of durable plastic and is designed to fit the specific models listed in the product description. It features a white finish and is easy to install. The handle measures app...

Whirlpool Harns-Wire Part# W10242897 is a replacement part for Whirlpool washers. It is a wiring harness that connects the electronic control board to the motor and other components in the washer. The harness is made of durable plastic and features a strain relief to protect the wires from damage....

Whirlpool HARNS-WIRE Part# WPW10201879 is a replacement wire harness for Whirlpool dryers. This wire harness is used to connect the electronic control board to the various components in the dryer, such as the heating element, motor, and sensors. The wire harness consists of a set of colored wires ...

Whirlpool HINGE - Part# WPW10198417 is a replacement part for Whirlpool refrigerators. It is a genuine OEM part and is used to replace the existing hinge on the refrigerator door. The hinge is made of metal and plastic and has two mounting holes on each side. It attaches to the refrigerator door f...

Whirlpool HOSE - Part# WP8540012 is a replacement part for Whirlpool washing machines. It is a 6-foot long, 5/8-inch diameter hose that connects the water inlet valve to the water supply line. The hose is made of durable rubber and features a 90-degree elbow on one end for easy installation. This ...

Whirlpool HOSE - Part# WP8540019 is a replacement part for Whirlpool washing machines. It is a 5-foot long hose that connects the water inlet valve to the water supply line. This hose is made of durable rubber and plastic materials and is designed to withstand high pressure and temperatures. The h...

Whirlpool HOSE - Part# WP8540063 is a replacement part for Whirlpool washing machines. It is a drain hose that connects the washer to the drain pipe. The hose is made of flexible plastic and measures 8 feet in length. It has an inner diameter of 1-1/4 inches and an outer diameter of 1-3/8 inches. ...

Whirlpool HOSE - Part# WP8540294 is a replacement part for Whirlpool washing machines. It is a flexible hose that connects the water inlet valve to the water supply line. This hose is made of durable rubber and is designed to withstand high pressure and temperatures. It measures approximately 4 fe...

Whirlpool KEY - Part# WPW10114740 is a replacement part for Whirlpool washing machines. It is a plastic key that fits into the lid lock assembly and allows the lid to be opened and closed. The key is designed to fit into the lid lock assembly on Whirlpool washing machines, including those with mod...

Whirlpool KIT-SECUR Part# WPW10169579 is a security kit designed to help protect your home from intruders. The kit includes a door and window sensor, a motion detector, and a keypad. The door and window sensor will detect when a door or window is opened or closed, while the motion detector will de...

Whirlpool LATCH Part# WPW10375379 is a replacement part for Whirlpool washing machines. It is a plastic latch that attaches to the lid of the washing machine and helps keep it closed during operation. The latch is designed to be easy to install and use, and it can be used with both top-loading and...

Whirlpool Motor-Drive Part# WPW10171927 is a direct drive motor for Whirlpool washers. It is designed to replace the older belt-drive motors used in many Whirlpool washers. This motor is designed to be quieter and more efficient than the older belt-drive motors, as well as providing more power and...

The Whirlpool Nozzle (Part# WP8183181) is a replacement part for a variety of Whirlpool dishwashers. It is a plastic nozzle that attaches to the spray arm of the dishwasher and directs the water spray onto the dishes. The nozzle has four small holes in it that allow water to be sprayed in differen...

Whirlpool NUT - Part# 233076 is a replacement part for Whirlpool washing machines. It is a hex nut that is used to secure the water inlet valve to the back of the washer. The nut is made of metal and has a diameter of 3/8 inch. It is designed to fit all Whirlpool washing machines, including front-...

Whirlpool PAD Part# WPW10212660 is a replacement part for Whirlpool washing machines. It is a control panel overlay that covers the control panel of the washing machine. This part is used to replace a worn or damaged control panel overlay and restore the appearance of the washing machine. The part...

Whirlpool PIPE-EXHST - Part# WP8563728 is a replacement exhaust pipe for Whirlpool dryers. It is made of metal and measures approximately 8 inches in length. The pipe is used to vent the hot air from the dryer to the outside of the home. It connects to the back of the dryer and runs through a wall...

Whirlpool PLUG is a replacement part for Whirlpool appliances. It is a plug-in part that fits into the back of the appliance and connects to the power source. The part number 8565119 is a three-pronged plug that fits into the outlet and has two flat prongs and one round prong. This plug is used in...

The Whirlpool PULLEY - Part# WP8540088C is a replacement part for Whirlpool washing machines. It is a plastic pulley that helps to drive the belt that turns the agitator in the washer. The pulley has a diameter of 2-3/4 inches and is used in many models of Whirlpool washers. It is important to rep...

The Whirlpool PULLEY-IDR - Part# WPW10344192 is a replacement part for a variety of Whirlpool washing machines. It is a plastic pulley that helps to drive the belt that turns the agitator in the washer. The pulley has an inner diameter of 1-1/4 inches and an outer diameter of 2-3/4 inches. It is m...

The Whirlpool Retainer Part# WPW10198458 is a part used in many Whirlpool washing machines. It is a plastic retainer that holds the inner tub of the washing machine in place. It is located on the back of the washer and attaches to the inner tub with two screws. The retainer helps to keep the inner...

The Whirlpool Screw Part# 3400618 is a replacement part for Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw that is used to secure the top panel of the appliance to the frame. This screw is made of steel and has a zinc plated finish for corrosion resistance. The screw has a Phi...

The Whirlpool 355515 is a replacement screw for many Whirlpool appliances. This screw is used to secure the outer tub to the inner tub in washing machines and dishwashers. It is made of metal and measures approximately 1/4 inch in diameter and 1-1/2 inches in length. The head of the screw has a sl...

The Whirlpool Screw Part# 8540329 is a replacement part for Whirlpool washers and dryers. It is a 5/16-inch-by-1-1/4-inch hex head screw that is used to secure the outer tub to the cabinet of the appliance. This screw is made of steel and has a zinc finish for corrosion resistance. It is designed ...

Whirlpool SCREW - Part# W10246531 is a replacement part for Whirlpool washing machines. It is a Phillips head screw that is used to secure the agitator to the transmission shaft. The screw measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It is made of metal and has a zinc fi...

The Whirlpool Screw - Part# WP355515 is a replacement part for various Whirlpool appliances. It is a #8-32 x 1/2 inch long, Phillips head screw. This screw is used to secure the outer tub to the cabinet of the appliance. It is made of metal and has a zinc finish for corrosion resistance. The part ...

Whirlpool SCREW - Part# WP8534022 is a replacement part for Whirlpool appliances. It is a metal screw used to secure the parts of the appliance together. This screw is made of steel and has a Phillips head. It measures approximately 1/4 inch in diameter and 1-1/2 inches in length. The part number ...

Whirlpool SCREW - Part# WP8540282 is a replacement part for Whirlpool appliances. It is a screw that is used to secure the door liner to the cabinet frame of the appliance. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of steel. This part is u...

Whirlpool SCREW - Part# WP8540382 is a replacement part for Whirlpool appliances. It is a self-tapping screw that is used to secure the front panel of the appliance to the frame. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of steel. This par...

Whirlpool Screw Part# WP8540725 is a replacement part for Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw used to secure the top panel of the appliance to the cabinet. This screw is made of steel and has a zinc plated finish for corrosion resistance. It is designed to fit all W...

The Whirlpool Screw Part# WPW10137456 is a replacement part for many Whirlpool washing machines. It is a metal screw that is used to secure the agitator to the drive shaft of the washer. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of zinc-pl...

Whirlpool SCREW - Part# WPW10259288 is a replacement part for Whirlpool washing machines. It is a genuine OEM part and is made of metal. This screw is used to secure the agitator to the transmission shaft in the washer. It measures approximately 1 inch in length and has a Phillips head. This part ...

Whirlpool SEAL - Part# 8579663 is a replacement part for Whirlpool washers. It is a rubber seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the washer. The seal also helps to reduce noise and vibration during the wash cycle. This part is made of du...

The Whirlpool Seal-Door Part# WPW10407973 is a replacement part for Whirlpool refrigerators. It is a door gasket that seals the refrigerator door to the refrigerator cabinet. The seal helps to keep cold air in and warm air out, helping to maintain an even temperature inside the refrigerator. The s...

The Whirlpool SHAFT - Part# WPW10359271 is a replacement part for a variety of Whirlpool washing machines. It is the drive shaft that connects the motor to the transmission. The shaft is made of metal and measures approximately 8 inches in length. It has a 5/16 inch diameter and is designed to fit...

The Whirlpool SHAFT - Part# WPW10359272 is a replacement part for a variety of Whirlpool washing machines. It is the drive shaft that connects the motor to the transmission. The shaft is made of metal and measures approximately 17 inches in length. It has two grooves on one end and a single groove...

Whirlpool STRIKE - Part# WP8540221 is a replacement part for Whirlpool washers. It is a strike that is used to secure the lid of the washer when it is closed. The strike is made of metal and has two mounting holes for easy installation. It also includes a spring-loaded plunger that helps keep the ...

Whirlpool STRIKE is a part used in Whirlpool washing machines. It is a plastic strike that is used to secure the lid of the washing machine. The part number WP8565122 is specific to Whirlpool washers and is designed to fit into the lid of the washer. The strike helps keep the lid closed during ope...

Whirlpool SWITCH - Part# WPW10085220 is a replacement part for Whirlpool washers. It is a three-position switch that controls the water level, agitation speed, and spin speed of the washer. The switch has three positions: low, medium, and high. When the switch is in the low position, the washer wi...

Whirlpool SWITCH - Part# WPW10155571 is a replacement part for Whirlpool washing machines. It is a 3-position switch that controls the water level, agitation speed, and spin speed of the washer. The switch has three positions: low, medium, and high. It is used to select the desired water level, ag...

The Whirlpool Switch-Plg Part# WP8564010 is a replacement part for Whirlpool washing machines. It is a 3-position switch that controls the water level in the washer. The switch has three positions: Low, Medium, and High. When the switch is in the Low position, the washer will fill with a low amoun...

Whirlpool Switch-Vlt Part# WPW10131838 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the agitation, spin, and drain functions of the machine. The switch has three positions: agitate, spin, and drain. When the switch is in the agitate position, it...

Whirlpool SWITCH-WL - Part# WPW10292407 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the water level in the washer. The switch has three positions: low, medium, and high. The switch is used to select the desired water level for the wash cycle. I...

A Whirlpool Thermistor (Part# WP8577274) is a temperature-sensing device used in many Whirlpool appliances. It is a small, disc-shaped component that contains a material that changes resistance when exposed to different temperatures. The thermistor is connected to the appliance’s control board and...

Whirlpool THRMST-FIX Part# WP3391912 is a replacement thermostat for Whirlpool dryers. It is designed to regulate the temperature of the dryer and ensure that it runs at the correct temperature. The thermostat is located inside the dryer and can be accessed by removing the back panel. The thermost...

Whirlpool TRAP Part# WPW10405608 is a drain trap assembly for Whirlpool washing machines. It is used to prevent sewer gases from entering the home through the washing machine drain. The trap includes a rubber gasket, plastic nut, and plastic elbow. The rubber gasket creates a seal between the drai...

The Whirlpool VALVE - Part# WPW10212596 is a replacement part for a variety of Whirlpool washing machines. It is a water inlet valve that controls the flow of water into the washer. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the...

The Whirlpool VALVE - Part# WPW10212598 is a water inlet valve for a washing machine. It is used to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when the washer is in ...

The Whirlpool Valve-Gas Part# WPW10141728 is a gas valve used in many Whirlpool gas dryers. It is a two-stage, dual solenoid valve that controls the flow of gas to the burner. The valve has two coils, one for each stage of operation. The first coil opens the main gas supply line when the dryer is ...

Whirlpool WHEEL - Part# WPW10349492 is a replacement part for Whirlpool washing machines. It is a plastic wheel that fits onto the agitator in the washer tub. The wheel helps to move the agitator back and forth during the wash cycle, allowing clothes to be agitated and cleaned. This part is made o...