Model: CGB500P3M1D1

A door hinge is a hardware device that connects two pieces of material together, allowing them to swing open and closed. The door hinge is typically made of metal and consists of two plates with screw holes, connected by a pin or rod. The plates are mounted to the door frame and the door itself, a...

DOOR HINGE LT - Part# WB10X26464 is a left-hand door hinge manufactured by General Electric. It is designed to be used with a variety of GE ovens and ranges. The hinge is made of metal and features a black finish. It measures approximately 4 inches long and 1 inch wide. The hinge is designed to at...

GE ASM CAP BURNER SMALL V2 (Part# WB16X28654) is a replacement part for General Electric (GE) gas ranges. It is a small burner cap that fits over the burner head to help protect it from spills and other debris. The cap also helps to evenly distribute the heat from the burner. This part is made of ...

GE Bracket Drawer Part# WB02X24742 is a replacement part for GE ovens. It is a bracket drawer that attaches to the bottom of the oven and holds the drawer in place. The bracket is made of metal and has two holes for mounting screws. This part is used to replace a worn or damaged bracket drawer on ...

The GE Broil Ignitor Glowbar (Part# WB13X24755) is a replacement part for many GE gas ovens. It is a glowbar ignitor, which is an electrical device that produces a spark to ignite the gas in the oven. The glowbar ignitor works by using electricity to heat up a small metal filament inside the ignit...

GE Burner Bake Part# WB16X28250 is a replacement part for GE ovens. It is a bake element that is used to heat the oven cavity. The element is made of metal and has two terminals at the back. It measures approximately 16 inches wide by 28 inches long and has a wattage rating of 2,500 watts. This pa...

The GE Central Orifice Holder - Part# WB28X24762 is a replacement part for a range or cooktop. It is used to hold the orifice in place and secure it to the burner. The orifice is the small hole in the burner that allows gas to flow through and be ignited. This part is made of metal and is designed...

GE CLIP RANGETOP - Part# WB02X26569 is a replacement part for GE range tops. It is a metal clip that attaches to the back of the range top and holds it in place. The clip is made of stainless steel and has two holes for screws to secure it to the range top. This part is used on all GE ranges, incl...

The GE Convection Element Part# WB44X10051 is a replacement part for GE ovens. It is a heating element that helps to circulate hot air throughout the oven cavity, allowing food to cook evenly and quickly. The element is made of metal and has two terminals at the back. It is approximately 16 inches...

GE Crystal Window is a part number WB57K10174, which is a window sash replacement kit. This kit includes all the necessary components to replace a broken or damaged window sash. The kit includes two vinyl-clad frames, two jamb liners, two sash locks, one tilt latch, one balance shoe, and installat...

GE Electrodes & Harness H.V - Part# WB18X26980 is a high voltage electrode and harness assembly for use in GE ovens. This part includes two electrodes and a high voltage harness that connects them to the oven's control board. The electrodes are used to detect the presence of heat in the oven cavit...

GE END SUPPORT DD - Part# WB07X29143 is a part for a General Electric microwave oven. It is an end support for the turntable tray in the oven. This part is made of metal and is used to hold the turntable tray in place. It has two mounting holes on either side and comes with two screws for installa...

GE END SUPPORT DD - Part# WB07X29144 is a part used in some GE ovens. It is an end support for the oven door. This part helps to keep the door in place and provide stability when opening and closing the oven door. The part is made of metal and is designed to fit into the existing holes on the oven...

GE FAN MOTOR CONVECT Part# WB26X28953 is a motor assembly for a convection fan in a range or oven. It is designed to move air around the oven cavity to ensure even cooking temperatures. The motor assembly includes the motor, fan blade, mounting bracket, and wiring harness. The motor is rated at 12...

The GE Igniter Glowbar (Part# WB13X25500) is a replacement part for many GE gas ovens and ranges. It is a metal bar with a ceramic coating that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is an essential p...

The GE Ignition Module Part# WB13X24741 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic control board that controls the oven’s ignition system, which is responsible for lighting the oven’s burner. The module includes a spark igniter, spark electrode, and safety ...

GE LATCH AUTOMATIC - Part# WB10X24780 is a replacement part for General Electric (GE) ovens. It is an automatic latch that is used to secure the oven door in place. The latch is made of durable plastic and metal components and is designed to last for many years. It features a spring-loaded design ...

GE Manifold Tube Supply - Part# WB28X24772 is a replacement part for GE refrigerators. It is a tube that supplies water to the refrigerator's ice maker and water dispenser. The tube is made of plastic and measures approximately 4 feet in length. It has two fittings on either end, one for the water...

The GE Orifice Holder RF Part# WB28X24761 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the burner. It also has an O-ring t...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

GE Panel Side - Part# WB56X29670 is a replacement part for GE refrigerator models. It is a white plastic panel that fits on the side of the refrigerator and helps to keep the temperature consistent inside the appliance. The panel also helps to reduce noise from the refrigerator's compressor. This ...

The GE Plunger Switch - Part# WB24X27550 is a replacement part for many GE ovens. It is a single-pole, double-throw (SPDT) switch that is used to control the oven's bake and broil functions. The plunger switch has two terminals and a plunger that can be pushed in or pulled out to change the positi...

The GE Reversible Grill/Griddle - Part# WB31X24998 is a two-in-one cooking appliance that can be used as either a grill or a griddle. It features a reversible, non-stick cooking surface that can be flipped over to switch between the two functions. The griddle side has raised edges to contain food ...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

GE TRIM FRONT BOTTOM - Part# WB01K10072 is a replacement part for GE refrigerators. It is a plastic trim piece that fits on the bottom of the refrigerator door. It helps to provide a finished look to the refrigerator and also helps to keep food and other items from falling out of the refrigerator ...

The GE Valve Burner 270 Part# WB21X20470 is a replacement part for GE gas ranges. It is a gas valve burner that controls the flow of gas to the burner. The valve has two settings, high and low, and is adjustable to provide the desired flame size. The valve also has a safety feature that will shut ...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...

The GE Valve Burner 270 Part# WB21X25979 is a replacement part for a variety of GE gas ranges. It is a single-valve burner that controls the flow of gas to the burner. The valve is designed to be used with a range of BTU ratings, from 5,000 to 12,000 BTU. It features an adjustable flame control kn...

Range Door Barrier Part# WB07X28885 is a replacement part for many GE and Hotpoint ovens. It is a metal strip that runs along the top of the oven door and helps to keep the door closed. The barrier helps to keep heat from escaping when the oven is in use, and also helps to prevent hot air from ent...

The Range Side Manifold Bracket (Part# WB02X24939) is a part used in some GE and Hotpoint range models. It is a metal bracket that attaches to the side of the range and holds the manifold assembly in place. The manifold assembly is responsible for controlling the gas flow to the burners. The brack...

The Receiver Hinge (Part# WB10X28563) is a part used in some General Electric (GE) and Hotpoint ovens. It is a replacement part for the hinge that connects the oven door to the oven frame. The hinge is made of metal and has two arms that attach to the oven door and frame. The arms are connected by...