Model: CFCP1NIZBSS

GE AIR TOWER ASM - Part# WR17X12456 is a part used in GE refrigerators. It is an air tower assembly that helps to regulate the temperature of the refrigerator. The air tower assembly consists of a fan, a blower wheel, and an evaporator coil. The fan draws in air from outside the refrigerator and c...

GE Articulation Mullion Assembly (Part# WR17X12753) is a part used in some GE refrigerator models. It is a plastic part that connects the two sides of the refrigerator door together. The assembly includes two plastic pieces that are connected by a metal pin. The articulation mullion assembly helps...

GE Board ASM Temp Control - Part# WR55X10684 is a temperature control board for General Electric (GE) refrigerators. It is used to regulate the temperature of the refrigerator and freezer compartments. The board is designed to monitor the temperature of both compartments and adjust the cooling sys...

GE Bracket Evap - Part# WR02X10764 is a replacement part for GE refrigerators. It is a bracket that holds the evaporator fan motor in place. The bracket is made of metal and has two mounting holes for attaching the fan motor. It also has two mounting holes for attaching the evaporator cover. This ...

GE BUMPER - Part# WR02X10540 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with General Electric refrigerators. It is a plastic bumper that is used to protect the refrigerator door from damage when it is opened and closed. The bumper helps to reduce noise and vib...

GE CAP CORNER OC BLACK - Part# WR02X10781 is a replacement part for General Electric (GE) refrigerators. It is a black corner cap that fits over the corner of the refrigerator door. This part helps to keep the door sealed and prevents air from entering the refrigerator. The part number WR02X10781 ...

GE COND RPL KIT - Part# WR84X10022 is a replacement condenser fan motor kit for GE refrigerators. This kit includes a new motor, fan blade, mounting bracket, and wiring harness. The motor is designed to replace the original condenser fan motor in GE refrigerators. It is a 1/4 HP, 115V, 60 Hz, 1550...

GE Cross Bar Pinion (Part# WR02X13388) is a replacement part for GE washers. It is a metal gear that helps to move the agitator back and forth during the wash cycle. The pinion is connected to the drive shaft and engages with the agitator cam to move the agitator. This part is made of metal and me...

GE Filter Asm and Tube - Part# WR17X11894 is a part used in GE refrigerator models. It is a water filter assembly that includes a filter tube, filter head, and a water filter. The filter tube connects to the water supply line and the filter head connects to the refrigerator's water dispenser. The ...

GE Frame Pan Meat (Part# WR72X10218) is a replacement part for GE refrigerators. It is a plastic frame that holds the meat pan in place. The frame is designed to fit into the refrigerator’s meat pan holder and secure the pan in place. This part helps keep the meat pan from sliding around and spill...

GE GASKET - Part# WR14X10330 is a replacement part for a variety of GE refrigerators. It is a gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of flexible rubber and has an adhesive backing for easy installation. It is designed to fit all GE r...

GE GASKET FF INLET - Part# WR14X10227 is a replacement part for GE refrigerators. It is a gasket that seals the inlet of the refrigerator, preventing cold air from escaping and warm air from entering. The gasket is made of flexible rubber and is designed to fit the inlet opening of the refrigerato...

The GE Gasket Frame Meat Side - Part# WR14X10217 is a replacement part for a variety of GE refrigerators. It is a gasket frame that is used to seal the meat side of the refrigerator. The gasket frame helps to keep the cold air in and the warm air out, helping to maintain an even temperature inside...

The GE Gasket Frame Meat Side - Part# WR14X10218 is a replacement part for a variety of GE refrigerators. It is a black plastic frame that seals the meat side of the refrigerator. The frame is designed to fit snugly around the meat drawer and keep it securely in place. It also helps to keep cold a...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator FASTENER SCREW HANDLE SS - Part# WR02X12028 is a stainless steel screw handle that is used to secure the refrigerator door handle to the refrigerator door. This part is designed to fit most GE, Hotpoint, PartsIPS, and Kenmore refrigera...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator French Door Gasket Seal With Flap - Part# WR14X10237 is a replacement part for French door refrigerators. This gasket seal is designed to fit around the edges of the refrigerator door, providing an airtight seal that helps keep cold ai...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Ice Maker Assembly - Part# WR30X10087 is a replacement part for refrigerators that have an ice maker. This assembly includes the ice maker, the mounting bracket, and the wire harness. The ice maker is responsible for producing and disp...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator ICE MAKER FILL CUP - Part# WR29X10092 is a replacement part for the ice maker in certain GE, Hotpoint, PartsIPS and Kenmore refrigerators. This fill cup is used to fill the ice maker with water and then dispense it into the ice tray. T...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Freezer Plastic Water Line UNION CONNECTOR 5/16" X 5/16" - Part# WR02X11330 is a plastic connector used to join two sections of a water line in a refrigerator or freezer. It is designed to fit 5/16" diameter water lines and has two...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Water Filter Bypass Plug Cap (Part# WR02X11705) is a replacement part for the water filter bypass plug on select GE, Hotpoint, RCA, and Kenmore refrigerators. This part is used to seal off the water filter bypass plug when the wate...

GE Grille Senso Part# WR02X10647 is a replacement part for GE refrigerators. It is a plastic grille that fits over the air vent in the refrigerator. The grille helps to keep the air circulating inside the refrigerator and helps to maintain an even temperature throughout the appliance. The grille a...

GE GROMMET - Part# WR02X10099 is a replacement part for a variety of GE refrigerators. It is a rubber grommet that is used to seal the water line connection between the refrigerator and the water supply line. The grommet helps to prevent water from leaking out of the connection and keeps it from e...

GE GROMMET EVAP FAN - Part# WR02X11331 is a replacement part for GE refrigerators. It is a fan that circulates air through the evaporator coils to help keep the refrigerator cool. The fan helps to ensure that the temperature inside the refrigerator remains consistent and that food stays fresh. The...

GE Handle Asm Commercial - Part# WR12X10983 is a replacement handle assembly for commercial GE refrigerators. This part is made of durable plastic and is designed to fit specific models of GE refrigerators. It includes the handle, mounting screws, and a plastic cover to protect the handle from dam...

GE Handle Pan Veg Lh - Part# WR17X12751 is a replacement handle for a GE refrigerator vegetable pan. This part is made of durable plastic and is designed to fit the left side of the vegetable pan. It has a white finish and features a recessed grip for easy handling. The handle measures approximate...

GE Handle Pan Veg Rh - Part# WR17X12750 is a replacement handle for a GE refrigerator vegetable pan. This part is made of durable plastic and is designed to fit the right side of the vegetable pan. It has a white finish and features a screw hole for easy installation. The handle measures approxima...

GE Heater Defrost Assembly (Part# WR51X10094) is a replacement part for GE refrigerators. It is used to regulate the temperature inside the refrigerator and prevent it from freezing up. The assembly includes a heater, a thermostat, and a defrost timer. The heater warms up the evaporator coils in o...

GE Low Side Asm - Part# WR85X10087 is a part for a refrigerator. It is the lower side assembly for the refrigerator and includes the lower grille, lower door gasket, and mounting hardware. The part number WR85X10087 is specific to General Electric (GE) refrigerators. This part helps to keep the te...

The GE Module Shelf Assembly FF (Part# WR71X10875) is a replacement part for GE refrigerators. It is a plastic shelf that fits into the refrigerator door and holds items such as condiments, jars, and bottles. The shelf is designed to be adjustable so that it can fit different sizes of items. It al...

GE Motor DC Evap Fan Asm - Part# WR60X10277 is a replacement evaporator fan motor assembly for GE refrigerator models. This part is used to circulate air through the refrigerator and freezer compartments in order to maintain proper temperatures. The motor assembly includes the motor, fan blade, mo...

GE Overload Part# WR08X10025 is a thermal overload relay designed to protect motors from damage due to excessive current draw. It is designed to detect when the current draw of a motor exceeds its rated capacity and shut off the power supply to the motor before it can be damaged. The overload rela...

GE Relay Start (Part# WR07X10084) is a part used in many GE appliances, such as refrigerators, dishwashers, and washing machines. It is a two-terminal device that controls the starting and stopping of the motor in the appliance. The relay start works by sending an electrical signal to the motor wh...

GE Ring Compression - Part# WR02X12149 is a part used in refrigerators and freezers to create a seal between the evaporator and the condenser. It is made of rubber and is designed to provide a tight seal that prevents air from leaking out of the refrigerator or freezer. The ring compression helps ...

GE Scr 1/4-20 Rt Flat 3/4 S - Part# WR01X10885 is a right-hand thread, flat head, 1/4-inch diameter, 20 threads per inch (TPI) screw manufactured by General Electric (GE). The part number is WR01X10885. This screw is 3/4 inches long and has a slotted drive type. It is made of steel and has a zinc ...

GE Scr 12-24 Tt Hx 7/8 S - Part# WR01X10792 is a replacement part for a GE refrigerator. It is a defrost heater assembly that is used to keep the evaporator coils from freezing up in the refrigerator. The part number WR01X10792 is the manufacturer's part number for this specific defrost heater ass...

The GE Screw Hinge Cover - Part# WR01X10379 is a replacement part for General Electric (GE) brand refrigerators. It is a plastic cover that fits over the screws that hold the refrigerator door hinges in place. The cover helps to keep the screws from becoming loose or coming out of the hinge, which...

GE Shield Light FF (Part# WR17X12671) is a refrigerator light shield designed to protect the light bulb in the refrigerator from being damaged. It is made of a durable plastic material and fits over the light bulb in the refrigerator. The shield helps to protect the bulb from accidental breakage a...

The GE Shunt Sensor (Part# WR02X10668) is a device used to measure the current in an electrical circuit. It is a type of current sensor that works by creating a small voltage drop across a low-resistance conductor, known as a shunt resistor. This voltage drop is then measured by the sensor and use...

GE SNUGGER MODU (Part# WR02X10582) is a motorized fan assembly designed to provide air circulation in refrigerators and freezers. It is designed to fit into the top of the refrigerator or freezer and circulate air throughout the interior. The fan is powered by a 12V DC motor and is equipped with a...

GE Spring Closure Part# WR01X10827 is a replacement part for GE refrigerators. It is a spring-loaded closure that is used to secure the refrigerator door in place. The closure is made of metal and plastic and features a spring-loaded mechanism that allows the door to be opened and closed with ease...

GE Stand Off Part# WR02X10663 is a metal bracket used to mount a refrigerator door to the refrigerator cabinet. It is designed to provide a secure connection between the door and the cabinet, while also allowing for easy adjustment of the door's position. The stand off is made of stainless steel a...

GE Support Cross Bar - Part# WR02X13385 is a part used in many GE refrigerators. It is a metal bar that is used to support the refrigerator shelves and drawers. The bar is made of stainless steel and measures approximately 2 inches wide by 13 inches long. It has two holes at each end for mounting ...

GE Support shelf - Part# WR02X12187 is a part used in some GE refrigerators. It is a plastic shelf support that helps to hold the shelves in place. The shelf support is designed to fit into the side walls of the refrigerator and is secured with two screws. This part helps to keep the shelves from ...

GE Thermostat Defrost Control Part# WR50X10069 is a replacement part for GE refrigerators. It is a thermostat that controls the defrost cycle of the refrigerator. The thermostat monitors the temperature inside the refrigerator and when it reaches a certain temperature, it will activate the defrost...

GE Tube Drain - Part# WR02X11426 is a replacement part for a variety of GE refrigerators. It is a plastic tube that runs from the back of the refrigerator to the drain pan. The tube helps to direct condensation away from the refrigerator and into the drain pan, where it can be safely disposed of. ...

GE Wheel Mobility - Part# WR02X10695 is a wheeled mobility device designed to help people with limited mobility get around more easily. It is a lightweight, foldable device that can be used indoors or outdoors. The device has four large wheels and a handlebar for easy maneuverability. It also feat...

The PIN HINGE ADJ BM - Part# WR01X10793 is a part used in many GE and Hotpoint refrigerators. It is a pin hinge adjustment bracket that is used to adjust the door alignment of the refrigerator. The bracket is made of metal and has two holes for mounting screws. It also has two pins that fit into t...