Model: CDE8500W

Maytag Collector Duct - Part# 12001324 is a part used in Maytag dryers. It is a metal duct that collects lint and other debris from the dryer and directs it to the lint trap. The duct is designed to fit specific models of Maytag dryers, and it is important to make sure that the part number matches...

The Maytag P-1 BRACE CYLINDER SUPPO - Part# 53-1625 is a part used in Maytag washing machines. It is a cylindrical support that helps to keep the cylinder in place and provide stability to the machine. The part is made of durable plastic and is designed to last for many years. It has a diameter of...

The Maytag P-1 SCREW - Part# 25-7101 is a replacement part for Maytag washing machines. It is a self-tapping screw that is used to secure the top panel of the washer to the cabinet. The screw measures 1/4 inch in diameter and is 2 inches long. It has a Phillips head and is made of steel. This part...

The Maytag P-1 SEAL ASM, CYL FRONT - Part# 31001637 is a replacement part for Maytag washing machines. It is a rubber seal that fits around the front of the cylinder and helps to keep water from leaking out of the machine. The seal is made of durable rubber and is designed to last for many years. ...

The Maytag P-1 SPRING, IDLER - Part# 31001465 is a replacement part for Maytag washing machines. It is a spring-loaded idler pulley that helps to keep the belt tensioned on the drive motor and helps to keep the belt from slipping off of the pulleys. The idler pulley is made of metal and has a plas...

The Maytag REINFORCEMENT BRACE/GLIDE - Part# 12002126 is a replacement part for Maytag washers. It is designed to reinforce the lower front panel of the washer and provide a smooth gliding surface for the drawer. The brace is made of metal and has two holes in it for mounting screws. It also has a...

This is a replacement blower wheel for a variety of clothes dryers from the brands Maytag, Whirlpool, KitchenAid, Magic Chef, Roper, Norge, PartsIPS Kenmore, Admiral and Amana. The wheel has a diameter of 8 inches and is part number 31001317. It is designed to fit into the blower housing of the dr...

The Maytag Whirlpool KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Dryer Right Hand Glide Kit - Part# LA-1006 is a replacement part for clothes dryers. It is designed to replace the right hand glide on the dryer drum. The kit includes two glides, four screws, and a hex w...

The Maytag Whirlpool KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Dryer Thermal Fuse Kit - Part# LA-1053 is a replacement part for clothes dryers. It is designed to protect the dryer from overheating and potentially causing a fire. The kit includes one thermal fuse, two...

Whirlpool CLIP Part# WP25-7854 is a clip used to secure the water inlet hose to the back of a washing machine. It is made of durable plastic and designed to fit all Whirlpool washers. The clip has two prongs that fit into the holes on the back of the washer, and then it is secured with a screw. Th...

Whirlpool CNTRL-ELEC - Part# WP33001212 is a replacement electronic control board for Whirlpool refrigerators. This part is used to replace the original electronic control board in Whirlpool refrigerators that have failed or are malfunctioning. The control board is responsible for controlling the ...

The Whirlpool FILTER-LI Part# WP53-0918 is a refrigerator water filter that is designed to reduce chlorine taste and odor, as well as sediment, rust, and other contaminants from your drinking water. This filter fits most Whirlpool refrigerators with a round plastic filter housing located in the gr...

Whirlpool GLIDE is a washing machine part that is designed to help reduce the amount of time and effort needed to clean clothes. The part is made up of a stainless steel ball bearing that is attached to a flexible plastic disc. This disc helps to reduce friction between the clothes and the drum of...

Whirlpool GLIDE is a high-efficiency washer that uses advanced technology to provide a powerful and efficient cleaning experience. The Whirlpool GLIDE Part# WP31001470 is a 4.5 cu. ft. top-load washer with a stainless steel drum and direct drive motor for quiet operation. It features an intuitive ...

The Whirlpool Idler Arm, Part# WP31001710, is a replacement part for many Whirlpool washing machines. It is used to help the belt tensioner move the belt in a smooth and consistent manner. The idler arm is made of metal and has a plastic wheel on one end that fits into the belt tensioner. The othe...

The Whirlpool KNOB SKIRT - Part# WP31001388 is a replacement part for Whirlpool ovens. It is a plastic skirt that fits around the oven knob and helps to protect it from damage. The skirt is designed to fit over the existing knob and can be easily removed for cleaning or replacement. The part numbe...

Whirlpool PAD-GLIDE Part# WP31001356 is a replacement part for Whirlpool washers. It is a gliding pad that helps to reduce friction between the washer tub and the basket. This part helps to reduce noise and vibration, while also helping to protect the finish of the washer tub. The pad is made of a...

The Whirlpool PULLEY-MO Part# WP31001535 is a replacement part for washing machines. It is a pulley that helps to drive the belt that turns the drum of the washing machine. The pulley is made of metal and has a diameter of 3 inches. It has a 1/2 inch bore and comes with a mounting bracket and hard...

The Whirlpool Seal Assy - Part# WP31001637 is a replacement part for Whirlpool washers. It is a rubber seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the washer. The seal also helps to reduce noise and vibration during the wash cycle. This part i...

The Whirlpool SEAL-DOOR - Part# WP31001529 is a replacement part for a variety of Whirlpool refrigerators. It is a door seal that helps to keep the cold air inside the refrigerator and prevent warm air from entering. The seal is made of durable plastic and features an adhesive backing for easy ins...

Whirlpool SUPPORT - Part# WP53-0197 is a support bracket designed to provide additional stability and support for Whirlpool washing machines. The bracket is made of heavy-duty steel and is designed to fit most Whirlpool washers. It attaches to the back of the washer and helps to reduce vibration a...

The Whirlpool THERMOSTAT - Part# WP31001192 is a thermostat designed to control the temperature of a home or business. It is a digital, programmable thermostat that can be used to regulate the temperature in both heating and cooling systems. The thermostat has a large, easy-to-read display and can...

The Whirlpool Timer 120 (Part# WP31001513) is a timer switch designed to control the operation of an electric water heater. It is a 120-volt, 15-amp timer that can be used to set the amount of time for which the water heater will be on and off. The timer has a digital display that shows the curren...