Model: CAW9244BW0

The Maytag Whirlpool KitchenAid Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Clothes Washer Washing Machine LID LOCK STRIKE - Part# W10240513 is a replacement part for washing machines. It is used to secure the lid of the washing machine in place, preventing it from opening during operati...

The Maytag Whirlpool Magic Chef Roper Norge PartsIPS Kenmore Admiral Amana Washing Machine Clothes Washer Pulley Nut - Part# W10163336 is a replacement part for washing machines. It is used to secure the pulley to the motor shaft. The nut is made of metal and has a hexagonal shape with a diameter ...

The Washing Machine Clothes Washer Water Leak Floor Protection Tray Fits Most Including Front Load Washers By Whirlpool Maytag - Part# 8212526 is a floor protection tray designed to fit most front-load washers, including those made by Whirlpool and Maytag. This tray is designed to catch any water ...

The Whirlpool Actuator - Part# WPW10006355 is a replacement part for Whirlpool washing machines. It is an electrical component that controls the movement of the washer's agitator and spin basket. The actuator is connected to the control board and receives signals from it to move the agitator and s...

The Whirlpool Agitator is a part that is used in washing machines to help move the clothes around during the wash cycle. It is made up of a central post with a series of fins or paddles attached to it. The fins or paddles help to create a swirling motion in the water, which helps to move the cloth...

Whirlpool BELT - Part# WPW10006384 is a replacement drive belt for Whirlpool washers. It is made of a durable rubber material and is designed to fit specific models of Whirlpool washers. The belt helps to drive the motor, which in turn drives the agitator and spin basket. This belt should be repla...

Whirlpool BEZEL - Part# WPW10392041 is a bezel or trim piece for a Whirlpool range. It is used to cover the gap between the oven door and the range top. The bezel is made of stainless steel and has a brushed finish. It measures approximately 24 inches wide by 3 inches high. This part is used on ma...

The Whirlpool BRAIDED FILL HOSE 2PK 5' - Part# 8212487RP is a two-pack of five-foot-long hoses designed for use with washing machines. The hoses are made of braided stainless steel, which is more durable and resistant to kinking than traditional rubber hoses. The hoses have 3/4" female hose thread...

The Whirlpool Cap - Part# WP3352483 is a replacement part for Whirlpool washers. It is a plastic cap that fits over the top of the washer's water inlet valve. The cap helps to keep dirt and debris from entering the valve and clogging it up. It also helps to prevent water from leaking out of the va...

Whirlpool CLAMP - Part# W10005430 is a replacement part for Whirlpool washing machines. It is a clamp that secures the drain hose to the pump. The clamp is made of durable plastic and has a metal band that tightens around the hose to keep it in place. This part helps prevent water from leaking out...

Whirlpool CNTRL-ELEC - Part# W10480289 is a replacement electronic control board for Whirlpool refrigerators. This part is used to replace the original electronic control board in the refrigerator and is responsible for controlling all of the refrigerator's functions, such as temperature, defrost ...

The Whirlpool CONNECTOR - Part# 285835 is a part used to connect two pieces of plumbing together. It is a straight connector that is made of plastic and has two ends that fit into the pipes. The connector is designed to provide a secure connection between the pipes and prevent any leaks or other i...

Whirlpool CORD-POWER - Part# WPW10525194 is a power cord for Whirlpool appliances. It is a 4-wire cord that is designed to be used with most Whirlpool dryers and ranges. The cord has a 3-prong plug on one end and a 4-prong plug on the other end. The 3-prong plug fits into any standard 120V wall ou...

The Whirlpool Dispenser Part# WPW10192089 is a part for a refrigerator. It is the water dispenser assembly, which includes the dispenser housing, the actuator, and the water tube. The dispenser housing is the part that holds all of the components together and mounts to the refrigerator door. The a...

The Whirlpool Drain Hose Extension 4' - Part# 285863 is a four-foot extension for the drain hose of a washing machine. It is designed to extend the length of the existing drain hose, allowing it to reach further into a sink or other drainage area. The extension is made from flexible plastic and ha...

Whirlpool ENDCAP - Part# WP8559501 is a replacement part for Whirlpool washers. It is an end cap that fits on the end of the agitator in the washer tub. This part helps to secure the agitator and keep it from moving around during the wash cycle. The end cap also helps to keep water from leaking ou...

Whirlpool ENDCAP - Part# WP8559502 is a replacement part for Whirlpool washers. It is an end cap that fits on the back of the washer tub and helps to secure the outer tub to the frame of the washer. The end cap also helps to keep water from leaking out of the back of the washer. This part is made ...

Whirlpool HARNS-WIRE Part# WPW10376574 is a replacement wire harness for Whirlpool washers. This part is used to connect the electronic control board to the various components in the washer, such as the water level switch, motor, and temperature switch. The wire harness includes a set of wires wit...

Whirlpool HOSE - Part# DRNEXT4 is a replacement hose for Whirlpool dishwashers. It is a 4-foot long, black rubber hose with a 3/8-inch diameter. The hose is designed to connect the dishwasher to the water supply line and provide a secure connection. It features an internal ribbing that helps reduc...

Whirlpool Lock Part# WPW10248088 is a door lock designed for use with Whirlpool washers and dryers. It is a three-piece assembly that includes the lock, the strike plate, and the mounting screws. The lock is designed to prevent unauthorized access to the washer or dryer, and it can be used in comb...

Whirlpool Panel-Rear - Part# WPW10461159 is a replacement part for Whirlpool washing machines. It is the rear panel of the machine and is used to cover the back of the machine. It is made of durable plastic and comes in white color. The panel helps to protect the internal components of the washing...

Whirlpool Pump-Water Part# WPW10276397 is a direct replacement for many Whirlpool, Kenmore, and Maytag washing machines. This pump is designed to circulate water through the washer during the wash and rinse cycles. It is responsible for draining the water from the washer after each cycle. The pump...

The Whirlpool RING-TUB (Part# WPW10215107) is a replacement part for Whirlpool washing machines. It is a plastic ring that fits around the outer edge of the tub and helps to keep the tub in place during the spin cycle. The ring also helps to reduce vibration and noise from the washer during operat...

The Whirlpool Screw - Part# WPW10249633 is a replacement part for various Whirlpool washing machines. It is a metal screw with a Phillips head and measures approximately 1/4 inch in diameter and 1-1/2 inches in length. This screw is used to secure the agitator to the transmission shaft in the wash...

Whirlpool SCREW - Part# WPW10273971 is a replacement part for Whirlpool appliances. It is a mounting screw used to secure the top panel of the appliance to the cabinet. The screw is made of metal and measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It has a Phillips head and...

Whirlpool SHIELD Part# WPW10427633 is a high-performance, multi-stage water filtration system designed to reduce contaminants from your drinking water. It is certified to NSF/ANSI Standard 42 and 53 for the reduction of chlorine taste and odor, lead, cysts, turbidity, and other contaminants. The s...

The Whirlpool Siphon Break is a part used in many Whirlpool washing machines. It is designed to prevent water from entering the machine during the spin cycle. The siphon break works by creating a vacuum inside the machine that prevents water from entering. The part consists of a rubber seal, a pla...

Whirlpool STRIKE is a replacement part for Whirlpool washing machines. It is a strike that is used to secure the lid of the washing machine. The part number WPW10240513 is a genuine OEM (Original Equipment Manufacturer) part and is made of durable plastic. This strike helps to keep the lid closed ...

Whirlpool SWITCH-CYC - Part# WPW10285512 is a replacement part for Whirlpool washing machines. It is a timer switch that controls the cycle selection, water level, and temperature settings of the washer. The switch has three positions: Off, Normal, and Permanent Press. It also has two terminals fo...

Whirlpool SWITCH-WL - Part# WPW10268911 is a replacement part for Whirlpool washers. It is a three-position switch that controls the water level in the washer. The switch has three positions: Low, Medium, and High. The switch is used to select the desired water level for the wash cycle. It is loca...