Model: CA2180XMW0

ASY Light, Halogen - Part# 92398 is a halogen light bulb manufactured by ASY Lighting. It is a 12V, 20W bulb with a G4 base. This bulb is commonly used in accent lighting, landscape lighting, and other low voltage applications. It has a long life of up to 2,000 hours and produces a bright white li...

B,C Rails - Part# 98057 is a part used in the installation of guardrails. It is a two-piece system that consists of a base rail and a cover rail. The base rail is designed to be installed directly onto the ground or concrete surface and provides the structural support for the guardrail system. The...

The Whirlpool Actuator - Part# 370959 is a replacement part for Whirlpool washers. It is a small, plastic device that is used to control the water level in the washer. The actuator is connected to the water level switch and it moves up and down depending on the water level in the washer. When the ...

The Whirlpool Bearing & Seal Kit - Part# 285134 is a replacement part for Whirlpool washing machines. This kit includes two bearings and one seal that are used to replace worn out or damaged parts in the washer. The bearings are made of high-quality materials and are designed to last for years. Th...

Whirlpool BELT - Part# WP95405 is a replacement drive belt for Whirlpool washers. It is a flat, flexible belt made of rubber and nylon that connects the motor to the transmission in order to drive the washer's agitator and spin basket. This belt is designed to fit most Whirlpool direct-drive washe...

The Whirlpool Bumper - Part# WP356908 is a protective rubber bumper that is designed to fit the bottom of a Whirlpool refrigerator. It is used to protect the refrigerator from scratches and dents caused by movement or accidental contact. The bumper is made of durable rubber and comes in black or w...

Whirlpool CLIP Part# WP359364 is a genuine OEM (Original Equipment Manufacturer) part designed for use with Whirlpool washing machines. This clip is used to secure the water inlet hose to the back of the washer. It is made of durable plastic and is easy to install. The clip helps prevent water fro...

6 Whirlpool CONNECTOR - Part# WP954406 is a part used in Whirlpool dishwashers. It is a two-wire electrical connector that connects the dishwasher's power cord to the dishwasher's control board. The connector has two male terminals that are inserted into the female terminals on the control board. T...

Whirlpool FEET-LVLNG - Part# WP358594 is a leveling foot kit designed for use with Whirlpool brand washing machines. The kit includes four adjustable feet and a wrench for installation. The feet are designed to help level the washing machine and reduce vibration during operation. The adjustable fe...

Whirlpool Feet-Leveling Part# WP367594 is a part designed to level a Whirlpool refrigerator. It is used to adjust the height of the refrigerator so that it sits level on the floor. The feet-leveling part consists of four adjustable feet, two of which are adjustable in height and two of which are a...

Whirlpool HOSE - Part# WP96743 is a replacement part for Whirlpool washing machines. It is a 6-foot long, black rubber hose that connects the water inlet valve to the water supply line. The hose is designed to withstand high pressure and temperatures up to 200°F (93°C). It is made of durable rubbe...

Whirlpool LOCK Part# WP18776 is a high-security locking system designed to protect your appliances from unauthorized access. It is a combination of a mechanical lock and an electronic keypad that can be programmed with up to eight different user codes. The lock is designed to fit most Whirlpool ap...

202 Whirlpool PAD Part# WP21097202 is a replacement part for Whirlpool washers. It is a plastic agitator pad that fits on the bottom of the agitator in the washer. The pad helps to reduce noise and vibration when the washer is running. It also helps to protect the clothes from being damaged by the ...

Whirlpool RIVET - Part# 356907 is a genuine OEM replacement part for Whirlpool appliances. It is a rivet used to secure two pieces of metal together. The rivet has a head on one end and a stem on the other end. The head is inserted into one piece of metal and the stem is inserted into the other pi...

Whirlpool RIVET Part# 98669 is a replacement part for Whirlpool refrigerators. It is a plastic rivet that is used to secure the refrigerator door gasket to the refrigerator door frame. The rivet has a diameter of 1/4 inch and a length of 1/2 inch. It is made of durable plastic and is designed to l...

Whirlpool Rivet - Part# WP356907 is a genuine OEM replacement part for Whirlpool appliances. This rivet is used to secure the door panels on Whirlpool refrigerators and freezers. It is made of durable metal and has a black finish. The rivet measures approximately 1/4" in diameter and 1/2" in lengt...

The Whirlpool Screw - Part# WP273556 is a replacement part for various Whirlpool appliances. It is a #8-32 x 1/2 inch long Phillips head screw used to secure the outer tub to the cabinet on some Whirlpool washers. This screw is made of metal and has a zinc finish for corrosion resistance. It is an...

A Whirlpool Snubber Pad (Part# 358336) is a part used in many Whirlpool washing machines. It is a rubber pad that helps to reduce the vibration and noise caused by the washer's spinning tub. The snubber pad is located between the tub and the cabinet of the washer, and it helps to absorb some of th...

The Whirlpool SPRING-BAR Part# 94726 is a replacement part for Whirlpool refrigerators. It is a spring-loaded bar that is used to hold the refrigerator door in place. The bar is made of metal and has two ends that fit into slots on the refrigerator door. The bar helps to keep the door closed and p...