Model: C2S995SEL1SS

Badge ASM - Part# WB02X29479 is a genuine OEM (Original Equipment Manufacturer) part from General Electric. It is a badge assembly for the GE range hoods. This badge assembly includes the front panel, the control knobs, and the light switch. It is used to replace a worn or damaged badge assembly o...

The Brushed SS Range Knob Bezel - Part# WB03X28165 is a replacement part for a range or stove. It is made of stainless steel and has a brushed finish. The bezel is designed to fit around the range knob and provide a finished look. It also helps to protect the knob from damage and wear. The bezel h...

The Burner Large V2 - Part# WB16X24723 is a replacement part for a range or oven. It is a large burner that is used to provide heat to the cooking surface. The burner has two parts: the burner head and the burner base. The burner head is made of stainless steel and has a large diameter of 8 inches...

A door hinge left (Part# WB10X26521) is a type of hardware used to attach a door to its frame. It is designed to allow the door to swing open and closed. The hinge consists of two parts: the pin and the knuckle. The pin is the metal rod that connects the two parts of the hinge together, while the ...

A door hinge right (Part# WB10X26520) is a type of hinge used to attach a door to a frame or wall. It is designed to be installed on the right side of the door when viewed from the outside. This particular part number is manufactured by General Electric and is designed for use with some GE brand o...

The GE Air Deviator (Part# WB02X28652) is a device designed to regulate the air flow in a room. It is typically used in heating and cooling systems to ensure that the air is evenly distributed throughout the space. The device works by diverting air from one area of the room to another, allowing fo...

GE ASM CAP BURNER SMALL V2 (Part# WB16X28654) is a replacement part for General Electric (GE) gas ranges. It is a small burner cap that fits over the burner head to help protect it from spills and other debris. The cap also helps to evenly distribute the heat from the burner. This part is made of ...

The GE Base Burner Part# WB16X28656 is a replacement part for a variety of GE gas ranges. It is designed to replace the base burner on a range that has been damaged or worn out. The base burner is the part of the range that provides heat to the cooktop and oven. It consists of a metal plate with s...

The GE Board Sensor, Part# WB27X28659, is a replacement part for General Electric (GE) ovens. It is a temperature sensor that monitors the oven temperature and sends signals to the electronic control board to regulate the oven temperature. The sensor is typically located in the back wall of the ov...

GE BUMPER - Part# WB02X24790 is a replacement part for GE range and ovens. It is a black plastic bumper that is used to protect the range or oven from damage when it is opened and closed. The bumper fits around the edge of the range or oven door and helps to reduce noise when the door is opened an...

The GE Burner Small V2 - Part# WB16X24721 is a replacement part for a variety of GE gas ranges. It is designed to replace the small burner on the range and is made of durable metal construction. The burner has a total of four ports, two for the flame and two for the air intake. The ports are desig...

The GE Burner XL V2 (Part# WB16X24722) is a replacement burner for select GE gas ranges. It is designed to replace the original burner on the range and features a durable construction that is built to last. The burner has an adjustable flame control knob that allows you to adjust the flame size fo...

GE CAP INNER - Part# WB16X28252 is a replacement part for General Electric (GE) ovens. It is an inner cap that fits inside the outer cap of the oven door. This part helps to keep the oven door sealed and secure when it is closed. The inner cap also helps to keep heat and moisture from escaping fro...

GE CKT SCREW - Part# WB01X24735 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric brand appliances. It is a screw used to secure the circuit board to the frame of the appliance. This part is made of metal and is approximately 1/2 inch in length. It has a Phil...

GE FAN SUPPORT - Part# WB02K10170 is a support bracket designed to provide additional support for ceiling fans. It is made of steel and is designed to be used with GE ceiling fans. The bracket attaches to the fan motor housing and provides additional stability for the fan. It also helps reduce vib...

The GE Frame Front Bumper (Part# WB02X28737) is a replacement part for select GE refrigerators. It is designed to protect the front of the refrigerator from damage caused by bumps and scrapes. The bumper is made of durable plastic and features a sleek, modern design that complements the look of yo...

The GE Frame Front Bumper (Part# WB02X28738) is a replacement part for select GE dishwashers. It is made of durable plastic and is designed to fit the front of the dishwasher frame. The bumper helps protect the dishwasher from damage caused by accidental bumps or scrapes. It also helps keep the di...

GE Gasket Oven Light - Part# WB32K10044 is a replacement part for GE ovens. It is a gasket that fits around the oven light bulb to keep it secure and prevent heat from escaping. The gasket is made of high-temperature silicone and is designed to fit all GE ovens. It helps to keep the oven light in ...

GE Harness Switches - Part# WB18X28761 are a type of electrical switch used in many GE appliances. They are designed to control the flow of electricity to the appliance, and can be used to turn it on or off. The switches are made from durable plastic and feature a simple push-button design for eas...

The GE Head Burner Part# WB16X28764 is a replacement part for a range or cooktop. It is designed to replace the head burner on a GE range or cooktop. The head burner is the main burner that provides heat to the cooking surface. It is made of durable stainless steel and has a black finish. The head...

The GE Inject Burner Mrhob Asm - Part# WB16X28867 is a replacement part for a variety of GE gas ranges. It is an injector burner assembly that includes the burner, the injector, and the mounting bracket. The injector burner assembly is responsible for providing a precise amount of fuel to the burn...

GE KNOB ASM - Part# WB03X28123 is a replacement part for General Electric (GE) range ovens. It is a knob assembly that includes the knob, shaft, and mounting hardware. The knob is used to control the temperature of the oven. It has a black finish and is made of plastic. The shaft is made of metal ...

GE KNOB ASM - Part# WB03X28125 is a replacement part for General Electric (GE) range ovens. It is a knob assembly that includes the knob, shaft, and clip. The knob is used to control the temperature of the oven. The shaft connects the knob to the oven's control board, and the clip holds it in plac...

GE KNOB ASM - Part# WB03X28126 is a replacement part for General Electric (GE) range ovens. It is a black plastic knob assembly that includes the knob, the shaft, and the mounting hardware. The knob is used to control the temperature of the oven. It has a metal insert in the center of the knob tha...

GE Lamp Insulation Part# WB02K10349 is a high-quality insulation material designed to protect lamps from heat and electrical shock. It is made of a flexible, flame-retardant material that can be easily cut to fit any lamp size. The insulation is UL listed and meets all safety standards for use in ...

GE LATCH AUTOMATIC - Part# WB10X28794 is a replacement part for GE ovens. It is an automatic latch that helps to keep the oven door closed while the oven is in use. The latch is made of durable plastic and metal components and features a simple design that makes it easy to install. The latch works...

GE LATCH AUTOMATIC is a latch assembly designed to be used with GE range ovens. It is a replacement part for GE ovens and can be used to replace a broken or worn out latch. The part number WB10X28795 is the official part number for the GE LATCH AUTOMATIC. This latch assembly is made of durable pla...

The GE Medium Burner - Part# WB16X24724 is a replacement part for a variety of GE and Hotpoint gas ranges. This medium burner is designed to provide an even heat distribution across the cooking surface. It features a durable porcelain-enameled steel construction and includes the mounting hardware ...

GE Oven Rack Part# WB48X21508 is a replacement oven rack for select GE ovens. This rack is made of heavy-duty steel and is designed to fit perfectly in your oven. It has a durable black finish and features a stop mechanism that prevents it from sliding out when you open the oven door. The rack als...

The GE Range LP High Altitude Kit (Part# WB28X29255) is a kit designed to help ensure that your gas range functions properly at high altitudes. The kit includes a pressure regulator, a venturi tube, and an orifice. The pressure regulator helps to reduce the amount of gas pressure that is delivered...

The GE Range Ng High Altitude Kit - Part# WB28X29254 is a kit designed to help adjust the performance of a gas range in high altitude areas. The kit includes an air shutter, air shutter spring, and an instruction sheet. The air shutter is used to adjust the amount of air that enters the burner whe...

The GE RF Burner Jet with Electrode (Part# WB02X24727) is a replacement part for GE gas ranges. It is a burner jet that uses radio frequency (RF) energy to ignite the gas. The RF burner jet has an electrode that is used to detect the presence of a flame and shut off the gas if the flame goes out. ...

GE SCREW 8-18 AB TRPO 3/8 SS - Part# WB01K10086 is a stainless steel screw manufactured by General Electric. It is an 8-18 AB thread size, with a 3/8 inch length and a TRPO (triple-start) thread pattern. The part number for this screw is WB01K10086. This screw is designed for use in a variety of a...

The GE TRIM KIT - Part# WB07X28824 is a trim kit designed to provide a finished look to your GE built-in microwave oven. This trim kit is made of stainless steel and fits most GE built-in microwaves. It features an adjustable trim frame that allows you to customize the fit of the trim kit to your ...

The GE Tube Manifold Supply - Part# WB28X28157 is a replacement part for a variety of GE dishwashers. It is a tube manifold supply that supplies water to the dishwasher. It is made of plastic and has two inlet ports and one outlet port. The inlet ports are used to connect the water supply line to ...

The GE Valve Burner 270 Part# WB21X20470 is a replacement part for GE gas ranges. It is a gas valve burner that controls the flow of gas to the burner. The valve has two settings, high and low, and is adjustable to provide the desired flame size. The valve also has a safety feature that will shut ...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...

The GE Valve Burner 270 Part# WB21X25979 is a replacement part for a variety of GE gas ranges. It is a single-valve burner that controls the flow of gas to the burner. The valve is designed to be used with a range of BTU ratings, from 5,000 to 12,000 BTU. It features an adjustable flame control kn...

GE Vent Trim - Part# WB07X28818 is a replacement part for a range hood. It is designed to fit select GE range hoods and is used to cover the gap between the vent and the wall. The trim is made of durable plastic and comes in a white finish. It measures approximately 8 inches long by 4 inches wide ...

HINGE ASM RH (Right Hand) Part# WB10X28782 is a replacement part for a range of General Electric (GE) ovens. It is the right hand side hinge assembly for the oven door. This part includes the hinge, mounting screws, and other necessary hardware. The hinge is made of metal and plastic and is design...

Range Glass & Touch Board AS (Part# WB56X28191) is a replacement part for a range or oven. It is the touch board assembly, which includes the glass touchpad and the control board. The touchpad is used to control the oven functions, such as setting the temperature, selecting cooking modes, and sett...

The Range Inject Large Part# WB02X24726 is a replacement part for a range or oven. It is used to inject air into the oven cavity to help regulate the temperature. The part consists of a metal tube with an inlet and outlet port, and a rubber seal at the end of the tube. The inlet port is connected ...

The Range Inject Small - Part# WB02X24728 is a small injector used to deliver a precise amount of fuel to the range burner. It is designed to be used with select GE and Hotpoint ranges. This injector is responsible for providing the correct amount of fuel to the burner, ensuring that it operates a...

The Receiver Hinge (Part# WB10X28563) is a part used in some General Electric (GE) and Hotpoint ovens. It is a replacement part for the hinge that connects the oven door to the oven frame. The hinge is made of metal and has two arms that attach to the oven door and frame. The arms are connected by...

The Receiver Hinge LH (Part# WB10X29636) is a part used in some General Electric (GE) ovens. It is the left-hand side of the receiver hinge assembly, which connects the oven door to the oven frame. The receiver hinge assembly consists of two parts: the left-hand side (LH) and right-hand side (RH)....

The Receiver Hinge RH (Part# WB10X29635) is a replacement part for a range or oven. It is the right-hand side of the hinge assembly and is used to attach the oven door to the range. The hinge consists of two parts: the receiver and the hinge arm. The receiver is mounted to the range frame and has ...