Model: C2S985SET1SS

GE Bracket Asm Anti-Tip - Part# WB02K10384 is a safety bracket designed to prevent a range from tipping over. It is made of metal and attaches to the rear of the range, securing it to the wall. The bracket helps to keep the range stable and prevents it from tipping over if someone bumps into it or...

GE Bracket MTG TF02 - Part# WB02K10052 is a mounting bracket designed for use with GE wall ovens. It is used to secure the oven to the wall and provide additional support. The bracket is made of steel and has a black finish. It includes two mounting screws and four wall anchors for installation. T...

GE Bumper Blue Part# WB02K10112 is a replacement part for GE ovens. It is a blue plastic bumper that is used to protect the oven door from damage when it is opened and closed. The bumper fits around the edge of the oven door and helps to keep it from hitting the frame of the oven when it is opened...

GE Burner Assy - Part# WB16K10079 is a replacement part for GE gas ranges. It is an assembly that includes the burner, the igniter, and the mounting bracket. The burner is made of stainless steel and has four ports for connecting to the gas supply line. The igniter is a spark generator that produc...

The GE Burner Cap Part# WB29K10045 is a replacement part for a range or cooktop. It is used to cover the burner and help protect it from dirt, dust, and other debris. The cap is made of durable metal and has a black finish. It measures approximately 4 inches in diameter and has four mounting holes...

GE CATCH Part# WB02K10110 is a part used in some GE ovens. It is a catch that helps to keep the oven door closed and secure. The catch is made of metal and has two parts: a spring-loaded latch and a strike plate. The latch attaches to the oven door, while the strike plate attaches to the oven fram...

The GE Conversion Kit LP - Part# WB28K10799 is a conversion kit designed to convert a natural gas range to a liquid propane (LP) range. This kit includes all the necessary components to make the conversion, including an LP orifice, LP regulator, and an LP hose. The orifice is used to regulate the ...

GE Crystal Window is a part number WB57K10174, which is a window sash replacement kit. This kit includes all the necessary components to replace a broken or damaged window sash. The kit includes two vinyl-clad frames, two jamb liners, two sash locks, one tilt latch, one balance shoe, and installat...

GE Electrode Top - Part# WB13T10080 is a replacement part for GE gas ovens. It is the top electrode that ignites the gas in the oven. The electrode sends an electrical spark to the gas, which then ignites and heats up the oven. This part is made of metal and has two wires attached to it. The wires...

The GE ENDCAP HANDLE (Part# WB07K10426) is a replacement part for a range of GE ovens. It is used to secure the endcap of the oven door, which helps to keep the door closed and sealed. The handle is made of durable plastic and features a black finish. It measures approximately 3 inches in length a...

GE GASKET LOWER - Part# WB04K10018 is a replacement part for GE range ovens. It is a black rubber gasket that fits around the lower oven door and helps to create a seal between the door and the oven cavity. This gasket helps to keep heat in the oven cavity, which helps to ensure even cooking tempe...

GE GASKET OVEN ASM - Part# WB32K10052 is a replacement part for GE ovens. It is a gasket that seals the oven door to the oven frame. The gasket helps to keep heat and moisture inside the oven, while also preventing air from entering the oven cavity. This part is made of durable materials and is de...

GE Gasket Oven Light - Part# WB32K10044 is a replacement part for GE ovens. It is a gasket that fits around the oven light bulb to keep it secure and prevent heat from escaping. The gasket is made of high-temperature silicone and is designed to fit all GE ovens. It helps to keep the oven light in ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range Stove Oven Electrode Clip - Part# WB01K10112 is a replacement part for the range stove oven. It is used to secure the electrode to the burner. The electrode clip is made of metal and has two prongs that fit into the holes on the electrode...

GE GLASS & PANEL DOOR ASM - Part# WB57K10175 is a replacement part for a General Electric oven. It is the glass and panel door assembly for the oven, which includes the inner and outer glass panels, the frame, and the handle. The part number WB57K10175 is used to identify this specific part. This ...

GE GLASS & TOUCH BOARD ASM - Part# WB27K10389 is a replacement part for GE ovens. It is a combination of a glass touch board and an assembly that includes the necessary components to make the oven function properly. The glass touch board is the user interface for the oven, allowing users to select...

GE Griddle Part# WB31K10220 is a non-stick griddle designed to fit on top of a range or cooktop. It is made of heavy-duty cast aluminum and has a non-stick coating for easy cleaning. The griddle has a large cooking surface that can accommodate up to six pancakes or four burgers at once. It also fe...

GE Heating Element Bottom - Part# WB44K10015 is a replacement part for GE electric ovens. It is the bottom heating element that helps to heat the oven. This part is made of metal and has two terminals at the end that connect to the oven's wiring harness. The element is designed to heat up quickly ...

GE Heating Element Top - Part# WB44K10014 is a replacement part for GE electric ovens. It is the top heating element in the oven and is responsible for providing the heat necessary to cook food. The part is made of metal and has two terminals that connect to the wiring harness of the oven. It also...

The GE Knob Assembly - Part# WB03K10265 is a replacement part for a range or oven. It is used to control the temperature of the oven or range. The knob assembly includes the knob, shaft, and dial. The knob is made of plastic and has a chrome finish. The shaft is made of metal and connects the knob...

The GE Knob Assembly - Part# WB03K10266 is a replacement part for many GE brand stoves and ovens. It is a black plastic knob with a white indicator line that allows you to control the heat of the stove or oven. This knob assembly includes the knob, shaft, and mounting hardware. It is designed to f...

The GE Knob Assembly - Part# WB03K10267 is a replacement part for many GE brand stoves and ovens. It is a black plastic knob with a chrome-colored center. This knob is used to control the temperature of the stove or oven. It has a D-shaped shaft that fits into the control panel of the appliance. T...

GE KNOB ASSEMBLY - Part# WB03K10308 is a replacement part for GE range/ovens. It is a black plastic knob assembly with a chrome finish and includes the knob, the mounting hardware, and the dial. The knob is used to control the oven temperature and other settings. It has a D-shaped shaft that fits ...

GE Lamp Insulation Part# WB02K10349 is a high-quality insulation material designed to protect lamps from heat and electrical shock. It is made of a flexible, flame-retardant material that can be easily cut to fit any lamp size. The insulation is UL listed and meets all safety standards for use in ...

GE LENS - Part# WB25K10009 is a replacement lens for GE range hoods. It is designed to fit a variety of GE range hood models and is made of durable, heat-resistant glass. The lens measures 8-1/2 inches in diameter and has a black finish. It is designed to provide an even distribution of light over...

GE Light Indicator Pilot Part# WB25K10010 is a replacement part for GE gas ovens. It is a small metal cylinder with a red light on the end that serves as an indicator for when the oven is in use. The pilot light will turn on when the oven is turned on and will stay lit until the oven has been turn...

GE Orifice Spud Part# WB28K10693 is a replacement part for a gas range. It is used to control the flow of gas from the main gas line to the burner. The orifice spud is made of brass and has a small hole in the center that is used to regulate the flow of gas. The size of the hole determines how muc...

GE Orifice Spud Part# WB28K10694 is a replacement part for GE gas ranges. It is a small metal piece that fits into the gas burner orifice to regulate the flow of gas. The spud is designed to fit into the orifice and create an airtight seal, allowing for precise control of the gas flow. This part i...

GE Orifice Spud Part# WB28K10834 is a replacement part for GE gas ranges. It is an orifice spud, which is a metal tube that connects the gas burner to the gas supply line. The orifice spud controls the flow of gas to the burner and helps regulate the flame size. This part is made of metal and has ...

The GE Outer Burner Cap - Part# WB29K10044 is a replacement part for a gas range. It is used to cover the outer burner on the range and protect it from dirt, dust, and other debris. The cap is made of durable metal and has a black finish. It measures approximately 4 inches in diameter and has four...

GE Oval Burner Asm - Part# WB16K10076 is a replacement part for GE gas ranges. It is an assembly that includes the burner, the burner base, and the mounting hardware. The burner is made of cast iron and has an oval shape with four ports for gas to flow through. The burner base is made of porcelain...

The GE Plunger Switch, Part# WB24K10068, is a single-pole switch designed to control a single circuit. It is typically used to control a light or fan. The switch has two terminals and is rated for 15 amps at 120 volts. It features a plunger-style design that allows for easy installation and operat...

GE SCREW - Part# WB01K10070 is a genuine OEM (Original Equipment Manufacturer) part manufactured by GE. It is a mounting screw used to secure the oven door hinge to the oven frame. The screw is made of metal and has a Phillips head for easy installation. It measures approximately 1/2 inch in lengt...

GE Screw Trilobular Part# WB01K10110 is a self-tapping screw designed for use in metal and plastic applications. It is made from high-grade steel and features a trilobular thread design that helps to reduce the amount of torque required to drive the screw into the material. The trilobular thread d...

GE Strike is a part number for a range surface burner igniter manufactured by General Electric. It is used to ignite the gas in the burners of a range or stove. The igniter works by using an electric current to heat up a small metal coil, which then produces a spark that lights the gas. This part ...

GE Thermostat Part# WB20K10017 is a digital thermostat designed to provide precise temperature control for residential and light commercial applications. It features a large, easy-to-read LCD display and simple push-button operation. The thermostat can be programmed to maintain a comfortable tempe...

The GE Valve Burner 270 (Part# WB21K10096) is a replacement part for GE gas ranges. It is a valve burner that is used to control the flow of gas to the burners on the range. The valve burner has two ports, one for the gas supply and one for the burner. The valve burner is designed to regulate the ...

The GE Valve Burner 270 (Part# WB21K10097) is a replacement part for GE gas ranges. It is a valve burner that controls the flow of gas to the burners on the range. The valve burner is designed to be used with a variety of different models of GE gas ranges, including models from the Profile, Monogr...

The GE VALVE BURNER 270 HI-CAP - Part# WB21K10080 is a replacement part for a gas range. It is designed to replace the existing burner valve on a GE gas range. The valve is designed to regulate the flow of gas to the burner, allowing for precise temperature control. The valve has a 270 degree rota...

GE Vent Motor Part# WB02K10346 is a replacement motor for range hoods and other ventilation systems. It is designed to replace the original motor in GE, Hotpoint, and RCA range hoods. This motor has a 1/50 HP rating and operates at 120 volts. It features a 3-speed switch, which allows you to adjus...

A HINGE DOOR, Part# WB10K10036, is a type of door that is attached to a frame using hinges. The hinges allow the door to swing open and closed. This particular hinge door is made by GE Appliances and is designed for use with select GE wall ovens. It features a stainless steel finish and comes with...

A Hinge Door, Part# WB10K10037, is a type of door that is attached to a frame by two or more hinges. This type of door is commonly used in residential and commercial applications. The door is usually made from wood, metal, or plastic and can be either hinged on the left or right side. The hinges a...

Range Light Cover (Part# WB08K10018) is a replacement part for GE range hoods. It is a plastic cover that fits over the light bulb in the range hood. The cover helps to protect the light bulb from dust and debris, as well as providing a decorative touch to the range hood. The cover is designed to ...

The Receiver Hinge, Part# WB10K10029, is a part used in the installation of a range or oven. It is designed to attach the oven door to the oven frame and allow it to open and close properly. The hinge consists of two parts: the receiver and the hinge arm. The receiver is mounted on the oven frame ...