Model: BLNC800EV2

Whirlpool Bearing Part# 775481 is a genuine OEM replacement part for Whirlpool washers. It is a direct drive motor bearing that helps to reduce noise and vibration during the spin cycle. The bearing is made of high-quality materials and is designed to last for many years. It fits most Whirlpool wa...

The Whirlpool Brkt-Retnr - Part# WP780239 is a bracket and retainer kit designed for use with Whirlpool washing machines. This kit includes two brackets and two retainers that are used to secure the washer's suspension rods to the cabinet. The brackets are made of metal and the retainers are made ...

Whirlpool Chain-Drive Part# 780477 is a replacement part for Whirlpool washing machines. It is a chain-drive motor that is used to power the agitator in the washer. The chain-drive motor is connected to the agitator via a belt and pulley system, and it rotates the agitator back and forth to help m...

Whirlpool CLIP Part# WP776036 is a part used in Whirlpool washing machines. It is a plastic clip that attaches to the bottom of the agitator and helps to secure it in place. The clip helps to keep the agitator from shifting or moving during the wash cycle. It also helps to keep the agitator from b...

Whirlpool GREASE - Part# 675351 is a high-temperature, synthetic lubricant designed for use in Whirlpool brand appliances. It is formulated to provide superior lubrication and protection against wear, rust, and corrosion. This grease is designed to resist breakdown under extreme temperatures and p...

The Whirlpool Handle (Part# WP608732) is a replacement handle for Whirlpool refrigerators. It is made of durable plastic and comes in a white finish. The handle measures approximately 4-1/2 inches wide by 1-3/4 inches deep and has two mounting holes for easy installation. This handle is designed t...

The Whirlpool KitchenAid Maytag PartsIPS Kenmore Trash Compactor Knob Key - Part# 776594 is a replacement part for a trash compactor. It is used to unlock the compactor door and allow access to the interior of the compactor. The knob key is made of durable plastic and features a unique design that...

Whirlpool NUT - Part# 776356 is a replacement part for Whirlpool dishwashers. It is a hex nut that is used to secure the lower dishrack to the lower dishrack roller assembly. This part is made of metal and is approximately 1/2 inch in diameter. It has a threaded hole in the center that allows it t...

Whirlpool NUT - Part# WP777383 is a replacement part for Whirlpool washers. It is a plastic nut that is used to secure the agitator to the transmission shaft. This part is made of durable plastic and comes in a black color. It measures approximately 1-1/4 inches in diameter and 1/2 inch in height....

Whirlpool NUT-POWER Part# WP777533 is a power cord kit designed for use with Whirlpool washers and dryers. The kit includes a three-pronged power cord, a strain relief clamp, and two wire nuts. The power cord is designed to be used with a standard 120V outlet and is UL listed for safety. The strai...

Whirlpool PIN - Part# 454512 is a replacement part for Whirlpool appliances. It is a 4-digit code that is used to access the control panel of the appliance. This code is unique to each appliance and must be entered in order to access the control panel. The code can be found on the back of the appl...

The Whirlpool Screw Part# 780263 is a replacement part for Whirlpool washers and dryers. It is a metal screw with a Phillips head and measures approximately 1/4 inch in diameter. This screw is used to secure the outer tub to the inner tub on the washer or dryer. It is important to use the correct ...

The Whirlpool Screw (Part# WP780263) is a replacement part for various Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw that is used to secure the outer cabinet of the appliance to the inner cabinet. This screw is made of steel and has a zinc plated finish for corrosion resistan...

Whirlpool SPRAY - Part# 285006 is a spray arm assembly for Whirlpool dishwashers. It is designed to provide an even distribution of water during the dishwashing cycle. The spray arm assembly consists of a plastic hub, which attaches to the dishwasher’s motor, and several arms that extend outward f...

Whirlpool SPRING - Part# 775736 is a replacement part for Whirlpool washing machines. It is a suspension spring that helps to support the outer tub of the washing machine. The spring is made of metal and measures approximately 4 inches in length and 1 inch in diameter. It is designed to be used wi...

Whirlpool SPRING - Part# WP777180 is a replacement part for Whirlpool washing machines. It is a spring that is used to help support the suspension rod and keep it in place. The spring helps to keep the suspension rod from moving or shifting during the wash cycle. This part is made of metal and mea...

Whirlpool SWITCH-DIR - Part# WP777811 is a replacement part for Whirlpool washing machines. It is a directional switch that controls the direction of the agitator in the washer. The switch is used to change the direction of the agitator from forward to reverse, allowing for different types of wash...

Whirlpool Touch-Up Paint Coffee Part# 72108 is a paint designed to repair minor scratches and chips on appliances. It is a fast-drying, durable paint that provides an exact color match to the original appliance finish. The paint comes in a convenient, easy-to-use pen applicator that allows for pre...

27 Whirlpool Touch-Up Paint is a high-quality, fast-drying paint that is designed to match the original finish on appliances. It is available in a variety of colors and finishes to match most major appliance brands. The paint comes in an aerosol can with a precision tip for easy application. It can...