Model: BA4120

The Speed Queen Alliance Laundry Systems Cissell Amana Huebsch PartsIPS Kenmore Clothes Washer Washing Machine IDLER PULLEY WHEEL - Part# 28800P is a replacement part for washers. It is used to help drive the belt that turns the washer’s drum. The pulley wheel is made of durable plastic and has a ...

The Speed Queen Alliance Laundry Systems Cissell Amana Huebsch PartsIPS Kenmore Clothes Washer Washing Machine Water Inlet Fill Valve - Part# 33930P is a replacement part for washing machines. It is designed to replace the original water inlet fill valve in select Speed Queen, Alliance Laundry Sys...

Speed Queen ASSY,TRANSMISSION CASE - Part# 33223P is a part used in Speed Queen washing machines. It is the transmission case assembly, which houses the transmission and other components that help to drive the agitator and spin basket. The transmission case assembly helps to protect the internal c...

Speed Queen BEARING,UPPER & LOWER - Part# 28944RP is a part used in Speed Queen washing machines. It is a set of two bearings, an upper and lower bearing, that are used to support the drum and tub assembly in the washing machine. The bearings are made of high-quality materials and are designed to ...

Speed Queen Brake & Washers - Part# 38505P are a set of washers and brake pads designed to fit Speed Queen washing machines. The washers are made from a durable, high-grade plastic material that is designed to last for years. The brake pads are made from a special rubber compound that is designed ...

Speed Queen Cord-Lead-In Part# 34458 is a power cord designed to provide electrical power to Speed Queen washers and dryers. It is a three-wire cord with a NEMA 10-30P plug on one end and a NEMA 14-30R receptacle on the other end. The cord is UL listed and CSA certified for safety. It is rated for...

The Speed Queen GASKET - Part# 39122 is a replacement gasket for Speed Queen washers. It is made of a durable rubber material and is designed to provide a tight seal between the washer tub and the cabinet. This gasket helps to prevent water from leaking out of the washer and keeps the cabinet dry....

Speed Queen HELIX-PLASTIC is a part number 38008 that is used in commercial laundry machines. It is a replacement part for the agitator assembly in Speed Queen washers. The HELIX-PLASTIC part consists of a plastic helix, which is the central component of the agitator assembly. The helix is designe...

Speed Queen HOSE WTR 3/8X60 FXF US STD - Part# F200116 is a water hose that is designed for use with Speed Queen washers. It is a 3/8 inch diameter hose that is 60 inches long and has a female fitting on one end and a standard US fitting on the other end. The hose is made of high-quality materials...

Speed Queen LEG,LEVELING 1/2-13 X 1.87 - Part# 34319 is a part used in Speed Queen washing machines. It is a leveling leg that is used to adjust the height of the machine. The leg is made of steel and has a diameter of 1/2-13 and a length of 1.87 inches. It has a threaded end that screws into the ...

Speed Queen LOCKNUT Part# 29220 is a locking nut designed to secure the washer’s drive motor to the transmission. It is made of steel and has a 1/2-inch diameter. The locknut has a special design that prevents it from loosening or coming off during operation. It also helps to keep the motor and tr...

The Speed Queen Pressure Bulb (Part# 205241) is a replacement part for Speed Queen washers. It is a rubber bulb that is used to create pressure in the washer’s water supply line. The pressure bulb helps to ensure that the water supply line has enough pressure to properly fill the washer with water...

Speed Queen Pulley & Washers - Part# 34232P is a genuine OEM replacement part for Speed Queen washers. This part includes the pulley and two washers. The pulley is used to connect the motor to the transmission, and the washers are used to secure the pulley in place. This part is made of durable pl...

The Speed Queen SHAFT OUTPUT PACKAGED - Part# 36570P is a replacement part for Speed Queen washers. It is a drive shaft assembly that includes the drive shaft, output gear, bearing, and seal. The drive shaft is made of stainless steel and is designed to provide a long-lasting, reliable connection ...

Speed Queen SHAFT,IDLER - Part# 28802P is a replacement part for Speed Queen washers. It is a shaft and idler assembly that helps to keep the belt in place on the washer. The shaft and idler are made of metal and plastic, and they are connected to the motor with two screws. The part number 28802P ...

The Speed Queen TIMER,3 CYCLE - Part# 31239P is a timer that is used to control the cycle time of a washing machine. It is designed to be used with Speed Queen washers and dryers. The timer has three cycles: wash, rinse, and spin. Each cycle can be set for a specific amount of time, allowing the u...

Speed Queen TOOL,SPRING HOOK - Part# 321P4 is a tool used to attach springs to the agitator in Speed Queen washing machines. It is made of durable plastic and features a hook-shaped end that allows for easy attachment of the spring. The tool also has a handle that provides a comfortable grip when ...

The Speed Queen TOOL-HEX WRENCH - Part# 306P4 is a multi-purpose tool designed for use with Speed Queen washers and dryers. It is a hex wrench that can be used to tighten or loosen screws, nuts, and bolts. The tool features a 6-point head design that allows for maximum torque and a comfortable gri...

Speed Queen TUBING PVC 26 - Part# 202700 is a replacement part for Speed Queen washers and dryers. It is a 26-inch long, 1/2-inch diameter flexible PVC tubing that is used to connect the water inlet valve to the water supply line. The tubing is made of durable PVC material and has a maximum operat...

The Speed Queen Wash Tub Short Ss Ribbed - Part# 204429P is a replacement part for washing machines. It is made of stainless steel and is designed to fit most Speed Queen washers. The ribbed design helps to create a more efficient wash cycle by allowing water to flow more freely through the tub. T...

The Speed Queen Washer Felt (Part# 29443) is a replacement part for Speed Queen washers. It is made of felt material and is used to help reduce vibration and noise during the washing cycle. The felt helps to absorb the shock of the spinning drum, which helps to keep the washer running smoothly and...

Speed Queen Washer-Filter Part# 803615 is a replacement filter for Speed Queen washers. This filter is designed to trap lint, dirt, and other debris from entering the washer's water supply. The filter is made of durable plastic and features a mesh screen that captures particles as small as 0.25mm ...

Whirlpool CLAMP - Part# WP285655 is a genuine OEM replacement part for Whirlpool washers. It is used to secure the drain hose to the pump. The clamp is made of durable plastic and has a tension adjustment screw to ensure a tight fit. This part is compatible with many Whirlpool washers and can be u...

Whirlpool CLAMP - Part# WP596669 is a replacement part for Whirlpool washing machines. It is a metal clamp that is used to secure the drain hose to the drain pipe. The clamp is made of stainless steel and has a plastic handle for easy installation and removal. The clamp measures approximately 2-1/...

The Whirlpool Main Bearing - Part# WP40004201P is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with various models of Whirlpool washing machines. This bearing helps to support the main tub and spin basket in the washer. It is made of durable plastic and metal compo...

The Whirlpool Screw Part# WP27001200 is a replacement part for Whirlpool appliances. It is a Phillips head screw that is used to secure the outer tub to the inner tub in washing machines. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a zinc plated finish and is made of s...

Whirlpool Screw Part# WP3390631 is a replacement part for Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw. This screw is used to secure the top panel of the appliance to the frame. It is made of metal and has a zinc finish for corrosion resistance. The screw has a thread size o...

The Whirlpool SCREW - Part# WP90767 is a replacement part for various Whirlpool appliances. It is a 6-32 x 1/2 inch hex head screw that is used to secure the control panel to the cabinet of the appliance. This screw is made of steel and has a zinc plated finish for corrosion resistance. It is desi...

A Whirlpool Strainer, Part# WP22002960, is a kitchen sink strainer designed to fit most standard kitchen sinks. It is made of durable stainless steel and features a removable basket that can be easily cleaned. The strainer has a wide rim that fits snugly into the sink and helps to keep food partic...