Model: ASD2627KEB

The Fisher & Paykel Support LH Shelf - Part# 12015002 is a replacement shelf designed to fit Fisher & Paykel refrigerators. This shelf is made of durable plastic and features a white finish. It measures approximately 16.5 inches wide by 6.5 inches deep and has a weight capacity of up to 15 pounds....

The Maytag EVAP KIT (SXS) - Part# 12001940 is a replacement part for Maytag refrigerators. It is an evaporator kit that includes the evaporator, fan motor, and mounting hardware. The evaporator is designed to remove moisture from the air inside the refrigerator, helping to keep food fresh and prev...

Maytag GLIDE, FRZ (LT) - Part# 67005375 is a replacement part for Maytag refrigerators. It is a freezer glide rail that helps to keep the freezer door in place and allows it to open and close smoothly. The part number 67005375 is specific to Maytag refrigerators and is used to replace the original...

The Maytag Grille, Sump BLK - Part# 67002382 is a replacement part for Maytag refrigerators. It is a black plastic grille that fits over the sump area of the refrigerator. The grille helps to protect the sump from dirt and debris and also helps to keep the refrigerator running efficiently. The par...

The Maytag SHIM, CLOSURE (BLK) - Part# 67005716 is a part used in Maytag washing machines. It is a black plastic shim that is used to secure the closure of the washing machine door. The shim helps to ensure that the door is properly sealed and does not leak water or steam during operation. The par...

The Maytag TEMP CONTROL ASSY - Part# 67004311 is a temperature control assembly for Maytag refrigerators. It is used to regulate the temperature inside the refrigerator. The assembly includes a thermostat, a temperature sensor, and a control board. The thermostat is used to set the desired tempera...

The Whirlpool Bucket-IC Part# WP67005959 is a part used in Whirlpool washing machines. It is a plastic bucket that holds the agitator and the impeller. The bucket is connected to the agitator shaft and the impeller shaft, which are both connected to the motor. The bucket helps to keep the agitator...

Whirlpool CORD-POWER - Part# WP67006506 is a power cord designed for use with Whirlpool appliances. It is a three-pronged cord that is 6 feet in length and has a NEMA 5-15P plug on one end and a C13 connector on the other end. The NEMA 5-15P plug is designed to fit into standard 120V wall outlets,...

The Whirlpool DAMPER-CO Part# WP67006249 is a replacement part for Whirlpool dryers. It is a damper control assembly that helps regulate the air flow in the dryer. The damper control assembly consists of a motor, a switch, and a fan blade. The motor controls the opening and closing of the damper, ...

The Whirlpool Door-Ice Part# WP12562701 is a refrigerator door ice dispenser. It is designed to dispense ice cubes from the freezer compartment of a refrigerator. The part includes the door assembly, the auger motor, and the ice bucket. The door assembly includes a handle, an ice chute, and a disp...

The Whirlpool GRILLE-FRT - Part# WP67006687 is a replacement part for Whirlpool refrigerators. It is the front grille assembly for the refrigerator, which includes the grille, handle, and mounting screws. The grille is made of plastic and comes in white. It is designed to fit most Whirlpool refrig...

The Whirlpool HEATER-EV Part# WP67004188 is a high efficiency electric water heater designed to provide hot water for residential and commercial applications. This model features a stainless steel tank with an enameled steel jacket for superior corrosion resistance. It also has a built-in thermost...

Whirlpool Housing Part# WP67006524 is a replacement part for Whirlpool dishwashers. It is the housing that holds the dishwasher motor and pump assembly. This part is made of durable plastic and is designed to fit all Whirlpool dishwashers. The housing includes a mounting bracket, two screws, and a...

The Whirlpool MOTOR - Part# WP67003226 is a replacement motor for a variety of Whirlpool washing machines. This motor is designed to replace the original motor in your washing machine and is compatible with many models. It features a powerful 1/2 HP motor that provides reliable performance and eff...

The Whirlpool SCREW - Part# 67006529 is a replacement part for Whirlpool washing machines. It is a small, metal screw that is used to secure the agitator to the drive shaft of the washer. The screw measures approximately 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is ...

The Whirlpool SCREW - Part# 67006692 is a replacement part for Whirlpool appliances. It is a #10-32 x 1/2 inch Phillips head screw. This screw is used to secure the control panel to the appliance frame. It is made of steel and has a zinc plated finish for corrosion resistance. The screw has a Phil...

Whirlpool SEAL-ICE Part# WP12665101 is a replacement part for Whirlpool refrigerators. It is a seal that goes around the ice maker to help keep it in place and prevent it from leaking. The seal is made of durable rubber and has a black finish. It is designed to fit most Whirlpool refrigerators and...

The Whirlpool Wheel-Crs Part# WP67002052 is a replacement wheel for Whirlpool washing machines. It is designed to fit the following models: CAE2745FQ0, CAE2745FQ1, CAE2745FQ2, CAE2745FQ3, CAE2745FQ4, CAE2745FQ5, and CSE2745FQ0. This wheel is made of durable plastic and has a diameter of 3-1/2 inch...