Model: ABR2533FES

Maytag CLIP, CORD - Part# M0104102 is a replacement part for Maytag appliances. It is a clip that attaches to the power cord of the appliance and helps secure it in place. The clip is made of plastic and comes in black color. It is designed to fit most Maytag appliances and can be used to replace ...

The Maytag GRIPPER, BUCKET - Part# 67003212 is a replacement part for Maytag washing machines. It is a plastic bucket with a handle and two grippers on the sides. The grippers are designed to hold the clothes in place during the wash cycle, preventing them from shifting around and becoming tangled...

The Maytag GROMMET, FAN MOTOR - Part# 67002780 is a replacement part for Maytag dryers. It is a rubber grommet that fits around the fan motor shaft and helps to reduce vibration and noise. The grommet also helps to keep the fan motor from coming loose from its mounting bracket. This part is used i...

The Maytag KIT, EVAP REPLACEMENT - Part# 12002041 is a replacement evaporator kit for Maytag refrigerators. The kit includes the evaporator, mounting bracket, and hardware needed to replace the existing evaporator in the refrigerator. The evaporator is responsible for cooling the air inside the re...

Maytag LADDER, SIDES - Part# 67001317 is a replacement part for Maytag washers and dryers. It is a two-piece ladder that attaches to the sides of the appliance and provides access to the top of the machine. The ladder is made of durable plastic and features two steps with non-slip treads for added...

The Maytag PIN, CENTER HINGE - Part# 67006642 is a replacement part for Maytag washers and dryers. It is a metal pin that is used to secure the center hinge of the washer or dryer door. The pin is made of durable metal and has a length of 2-3/4 inches. It also has a diameter of 1/4 inch. This part...

The Maytag SLIDE, PANTRY - Part# 67002002 is a slide-out pantry system designed to provide extra storage space in the kitchen. It is made of heavy-duty steel and features a smooth, full-extension ball bearing slide system for easy access to items stored inside. The pantry includes two adjustable s...

A Maytag THERMISTOR - Part# 67006883 is a temperature sensing device that is used in many Maytag appliances. It is a thermistor, which is a type of resistor that changes its resistance with temperature. The thermistor is connected to the appliance's control board and measures the temperature of th...

The Maytag TOE GRILLE ASSY (BLK) - Part# 67002224 is a replacement part for Maytag refrigerators. It is a black plastic grille that attaches to the bottom of the refrigerator door and covers the toe space between the door and the floor. The grille helps to keep dust, dirt, and other debris from en...

The Whirlpool Condenser - Part# WP67006131 is a condenser for refrigerators and freezers. It is a part of the cooling system that helps to keep the temperature inside the appliance at a consistent level. The condenser works by taking in warm air from the inside of the appliance and transferring it...

Whirlpool CORD-POWER - Part# WP67006506 is a power cord designed for use with Whirlpool appliances. It is a three-pronged cord that is 6 feet in length and has a NEMA 5-15P plug on one end and a C13 connector on the other end. The NEMA 5-15P plug is designed to fit into standard 120V wall outlets,...

The Whirlpool DRIER Part# WPB2150504 is a dryer designed to provide a convenient and efficient way to dry clothes. It features a 7.4 cu. ft. capacity, 10 drying cycles, and 5 temperature settings for optimal drying performance. The dryer also has an auto-dry feature that automatically stops the cy...

The Whirlpool FRAME-CRI Part# WP67003854 is a refrigerator frame assembly. It is designed to provide support for the refrigerator door and shelves. The frame is made of durable plastic and features a black finish. It includes two mounting brackets, screws, and instructions for installation. This p...

The Whirlpool FROST KIT- Part# 12002756 is a kit designed to help reduce frost buildup in the freezer. The kit includes a fan, mounting bracket, and wiring harness. The fan helps circulate air throughout the freezer, which helps prevent frost from forming on the walls and shelves. The mounting bra...

The Whirlpool GLASS-CRI Part# WP67006704 is a replacement glass cooktop for Whirlpool ranges. It is made of durable, heat-resistant glass and features a smooth, easy-to-clean surface. This part is designed to fit specific Whirlpool range models and comes with installation instructions. The cooktop...

The Whirlpool Grille Assy - Part# WP67002224 is a replacement part for a range or oven. It is the grille that covers the bottom of the oven and helps to protect it from spills and splashes. The grille is made of stainless steel and has a black finish. It measures approximately 20-1/2 inches wide b...

The Whirlpool HEATER-DE Part# WP67002493 is a high-efficiency electric water heater designed to provide hot water for residential and commercial applications. This model features a stainless steel tank with a corrosion-resistant anode rod, which helps to extend the life of the tank. It also has a ...

Whirlpool Housing Part# WP67006524 is a replacement part for Whirlpool dishwashers. It is the housing that holds the dishwasher motor and pump assembly. This part is made of durable plastic and is designed to fit all Whirlpool dishwashers. The housing includes a mounting bracket, two screws, and a...

The Whirlpool Jenn-Air KitchenAid Maytag Roper Admiral PartsIPS Kenmore Norge Magic Chef Amana Refrigerator Ice Maker Part# D7824706Q is a replacement ice maker assembly for select Whirlpool, Jenn-Air, KitchenAid, Maytag, Roper, Admiral, PartsIPS, Kenmore, Norge and Magic Chef refrigerators. This ...

The Whirlpool PLATE - Part# WP67006113 is a replacement part for Whirlpool dishwashers. It is a flat, round plate that fits into the bottom of the dishwasher tub and helps to keep dishes from moving around during the wash cycle. The plate is made of durable plastic and is designed to last for many...

The Whirlpool PLATE-FIL Part# WP67001668 is a replacement part for a dishwasher. It is a plastic filter plate that fits into the bottom of the dishwasher tub and helps to catch food particles and debris that can clog the dishwasher's drain. The filter plate has small holes in it that allow water t...

Whirlpool SUPPORT-C Part# WP12603701 is a part used in Whirlpool washing machines. It is a support bracket that helps to secure the agitator to the wash tub. This part is made of metal and is designed to fit specific models of Whirlpool washers. It includes two screws and two nuts for installation...

The Whirlpool THERMOSTAT - Part# WP67003426 is a thermostat designed to control the temperature of a room or space. It is a digital, programmable thermostat that can be used to regulate the temperature in a single room or multiple rooms. The thermostat has an easy-to-read LCD display and allows us...

The Whirlpool Trivet-Bottle Part# 67001656 is a stainless steel trivet designed to fit over the top of a standard size bottle. It is designed to provide an elevated platform for bottles, cans, and other containers to be placed on while cooking or serving. The trivet has three legs that fold up and...

The Whirlpool VALVE-INLT - Part# WP67006531 is a water inlet valve for a washing machine. It is designed to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when the washe...