Model: AB2526PEKW12

Maytag BOLT, ROLLER ADJ - Part# 67006611 is a replacement part for Maytag washing machines. It is a roller adjustment bolt that helps to adjust the height of the drum in the washer. This part is made of metal and has a hex head for easy installation. The part number 67006611 is used to identify th...

Maytag BUSHING, DOOR (WHT) - Part# 67004977 is a white plastic bushing used in Maytag washing machines. It is located on the door of the machine and helps to keep the door aligned and secure. The bushing is made of durable plastic and is designed to last for many years. It is an OEM part, meaning ...

The Maytag COVER, FILL TUBE/PLUG - Part# 67001098 is a replacement part for a Maytag washing machine. It is used to cover the fill tube and plug on the washing machine. The fill tube is the tube that connects the water supply to the washing machine, and the plug is used to seal off the water suppl...

The Maytag INSERT, DAMPER COVER - Part# 67003900 is a replacement part for Maytag dryers. It is a metal cover that fits over the damper assembly and helps to keep lint and other debris from entering the dryer. The damper cover helps to keep the air flow in the dryer regulated, which helps to ensur...

Maytag LADDER, SIDES - Part# 67001317 is a replacement part for Maytag washers and dryers. It is a two-piece ladder that attaches to the sides of the appliance and provides access to the top of the machine. The ladder is made of durable plastic and features two steps with non-slip treads for added...

The Maytag PIN, BOTTOM HINGE - Part# 67007018 is a replacement part for Maytag refrigerators. It is a plastic pin that attaches to the bottom hinge of the refrigerator door. The pin helps to keep the door in place and prevent it from swinging open or closed too quickly. The pin is made of durable ...

The Maytag PIN, CENTER HINGE - Part# 67006642 is a replacement part for Maytag washers and dryers. It is a metal pin that is used to secure the center hinge of the washer or dryer door. The pin is made of durable metal and has a length of 2-3/4 inches. It also has a diameter of 1/4 inch. This part...

Maytag SCREW - Part# 67006380 is a replacement part for Maytag washing machines. It is a Phillips head screw that is used to secure the outer tub to the cabinet of the washing machine. The screw measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It is made of metal and has a z...

Maytag SCREW - Part# 67006908 is a replacement part for Maytag washing machines. It is a Phillips head screw that is used to secure the top panel of the washer to the cabinet. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a zinc plated finish and is made of steel for dur...

The Maytag SLIDE, PANTRY - Part# 67002002 is a slide-out pantry system designed to provide extra storage space in the kitchen. It is made of heavy-duty steel and features a smooth, full-extension ball bearing slide system for easy access to items stored inside. The pantry includes two adjustable s...

The Maytag SPACER, ICE RACK - Part# 10972101 is a replacement part for Maytag refrigerators. It is a plastic spacer that fits between the ice maker and the refrigerator wall. The spacer helps to ensure that the ice maker is properly aligned and prevents it from shifting or vibrating during operati...

Maytag STOP, DOOR (WHT) - Part# 67003779 is a replacement part for Maytag washing machines. It is a white plastic door stop that helps keep the washing machine door open during the wash cycle. The part number 67003779 is used to identify the specific part and is necessary when ordering a replaceme...

Whirlpool ARM-SHUT Part# WP67004028 is a part used in Whirlpool washing machines. It is a shut off arm that helps to control the water level in the washer. The arm is connected to a float switch which senses the water level and turns off the water when it reaches a certain level. This part helps t...

The Whirlpool BULB-LIGH Part# WP67002552 is a replacement light bulb for select Whirlpool and Maytag refrigerators. This light bulb is designed to fit into the refrigerator's interior light socket and provide illumination for the interior of the refrigerator. It is a 25 watt, 120 volt, A15 style b...

The Whirlpool Condenser (Part# WP67006132) is a replacement part for refrigerators. It is a condenser coil that helps to cool the refrigerator by transferring heat from the inside of the refrigerator to the outside. The condenser coil is made of copper tubing and aluminum fins that help to dissipa...

The Whirlpool FRAME-CRI Part# WP67003854 is a refrigerator frame assembly. It is designed to provide support for the refrigerator door and shelves. The frame is made of durable plastic and features a black finish. It includes two mounting brackets, screws, and instructions for installation. This p...

The Whirlpool GLASS-CRI Part# WP67006704 is a replacement glass cooktop for Whirlpool ranges. It is made of durable, heat-resistant glass and features a smooth, easy-to-clean surface. This part is designed to fit specific Whirlpool range models and comes with installation instructions. The cooktop...

The Whirlpool GRILLE - Part# WPW10175909 is a replacement part for Whirlpool ovens. It is a metal grille that fits over the oven door and provides protection from heat and steam. The grille is made of stainless steel and has a black finish. It measures approximately 17-1/2 inches wide by 8-3/4 inc...

The Whirlpool Hinge-Center Part# WP12607103WD is a replacement part for a refrigerator door. It is designed to fit most Whirlpool, Maytag, KitchenAid, and Jenn-Air refrigerators. The hinge-center is the part that connects the two door hinges together and allows the door to open and close properly....

Whirlpool PAN-DRAIN Part# WP12579803 is a drain pan designed to fit underneath a washing machine. It is made of durable plastic and is designed to catch any water that may leak from the washing machine. The pan has an angled bottom that helps direct water away from the machine and into the drain. ...

Whirlpool PAN-ICE Part# WP67001255 is a refrigerator ice maker assembly. It is designed to fit in the freezer section of a Whirlpool refrigerator and provide an easy way to make ice cubes. The PAN-ICE assembly includes an ice maker, water valve, and control board. The ice maker produces up to 8 cu...

The Whirlpool Roller (Part# WP10450603) is a replacement part for many Whirlpool washing machines. It is a roller wheel that helps to move the clothes around in the washer during the wash cycle. The roller is made of durable plastic and is designed to last for many years. It is easy to install and...

The Whirlpool Screw - Part# WP67006380 is a replacement part for Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw used to secure the door switch to the control panel on many Whirlpool washers and dryers. This screw is made of metal and has a zinc finish for corrosion resistance....

Whirlpool SCREW - Part# WP67006908 is a replacement part for Whirlpool appliances. It is a self-tapping screw that is used to secure the cabinet panels and other components of the appliance. The screw is made of steel and has a black oxide finish for corrosion resistance. It measures 3/8 inch in d...

The Whirlpool Screw (Part# WP681249) is a replacement part for various Whirlpool appliances. It is a 1/4-20 x 1/2 inch Phillips head screw that is used to secure the outer tub to the cabinet of the appliance. This screw is made of metal and has a zinc finish for corrosion resistance. It is designe...

The Whirlpool SCREW-SM - Part# 67006564 is a replacement part for Whirlpool washing machines. It is a self-tapping screw that is used to secure the agitator to the transmission shaft. The screw measures approximately 1/4 inch in diameter and 1/2 inch in length. It is made of metal and has a black ...

The Whirlpool SHIM-NON Part# WPM0274057 is a part used in many Whirlpool washing machines. It is a plastic shim that is used to level the washer during installation. The shim helps to ensure that the washer is level and stable, which helps to reduce noise and vibration during operation. The shim a...

The Whirlpool SHROUD - Part# W10167023 is a replacement part for the Whirlpool refrigerator. It is a plastic cover that fits over the condenser fan motor and protects it from dust and debris. The shroud helps to keep the motor running smoothly and efficiently by preventing dirt and other particles...

The Whirlpool Shroud, Part# WPW10167023, is a replacement part for Whirlpool refrigerators. It is a plastic cover that fits over the condenser fan motor and helps to protect it from dust and debris. The shroud also helps to keep the condenser fan motor running cooler by providing an air gap betwee...

Whirlpool SLIDE is a patented, innovative laundry system that makes it easier to move heavy loads of laundry from the washer to the dryer. It features a unique sliding mechanism that allows you to slide the washer out of the way, making it easier to access and load the dryer. The SLIDE also featur...

The Whirlpool SWITCH-LI is a part number WPC3680310 and is a replacement part for the Whirlpool dishwasher. This switch is used to control the operation of the dishwasher. It is located on the lower left side of the dishwasher and has two positions: ON and OFF. The switch is used to turn the dishw...

Whirlpool Track - Part# WP67001719 is a replacement part for Whirlpool dryers. It is a track that helps guide the drum as it rotates during the drying cycle. The track is made of metal and measures approximately 4 inches in length. It attaches to the back wall of the dryer and helps keep the drum ...

Whirlpool TUBE - Part# WPB5705307 is a replacement part for Whirlpool washing machines. It is a plastic tube that connects the water inlet valve to the water level switch. The tube is used to control the amount of water entering the washer and to ensure that the proper amount of water is used for ...

The Whirlpool Tube-Disc Part# WP12866903 is a replacement part for Whirlpool washing machines. It is a plastic tube with a disc-shaped end that fits into the water inlet valve of the washing machine. The tube-disc helps to regulate the flow of water into the washing machine and helps to prevent ov...

The Whirlpool VALVE-INLT - Part# WP67006531 is a water inlet valve for a washing machine. It is designed to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when the washe...