Model: 7KSM155GBZCA0

The Whirlpool ARMATURE - Part# WPW10315777 is a replacement part for a variety of Whirlpool washing machines. It is an electric motor armature, which is the rotating part of the motor that creates the mechanical energy to power the washing machine. The armature is responsible for spinning the drum...

Whirlpool Bearing - Part# 240308 is a replacement part for Whirlpool washing machines. It is a tub bearing that helps to reduce noise and vibration in the washer during the spin cycle. The bearing helps to support the inner tub of the washer and allows it to spin smoothly and quietly. This part is...

Whirlpool Board-PHAS Part# WPW10325124 is a control board for Whirlpool washing machines. It is used to control the operation of the washer, including water level, temperature, spin speed, and other settings. The board is programmed with a set of instructions that tell it how to operate the washer...

The Whirlpool BRUSH-MTR - Part# WPW10380496 is a replacement motor brush for Whirlpool washing machines. This part is used to replace worn or damaged motor brushes in the washing machine. The motor brush helps to ensure that the motor runs smoothly and efficiently. It is important to replace the m...

Whirlpool CAP-HUB - Part# WP242765-2 is a part used in Whirlpool washing machines. It is a hub and cap assembly that helps to secure the agitator to the transmission shaft. The hub and cap are made of plastic and the hub has a metal insert for added strength. The part includes the hub, cap, and mo...

Whirlpool CAP-SCREW - Part# WPW10191926 is a replacement part for Whirlpool washers. It is a metal screw with a plastic cap that is used to secure the agitator to the washer's drive shaft. The part number WPW10191926 is specific to Whirlpool washers and will not fit other brands of washers. The ca...

80 Whirlpool CAP-SPRING - Part# WP11628780 is a replacement part for Whirlpool washing machines. It is a metal spring that fits into the lid of the washing machine and helps to keep the lid closed during operation. The spring is made of stainless steel and is designed to last for many years. It hel...

The Whirlpool DRIP RING (Part# WP240285) is a replacement part for Whirlpool dishwashers. It is a plastic ring that fits around the outside of the dishwasher tub and helps to direct water away from the motor and other components. The ring also helps to keep water from splashing onto the floor or c...

Whirlpool FOOT - Part# 9709707 is a replacement foot for Whirlpool washers and dryers. It is made of durable plastic and is designed to fit most Whirlpool models. The foot helps to keep the appliance stable and level on the floor, reducing vibration and noise. It also helps to protect the floor fr...

Whirlpool Foot - Part# WP9709707 is a replacement part for Whirlpool washing machines. It is a plastic foot that is used to support the washer during operation. The foot helps to keep the washer stable and prevents it from vibrating or moving around during use. It also helps to reduce noise and vi...

Whirlpool GEAR-CENTR Part# 9709627 is a part for Whirlpool washing machines. It is a replacement gear center that fits into the transmission of the washing machine. The gear center helps to keep the transmission in proper alignment and allows for smooth operation of the machine. It is made from du...

Whirlpool GEAR-HUB Part# WP9705130 is a replacement part for Whirlpool washing machines. It is a direct drive motor coupling, also known as a coupling kit, and it connects the motor to the washing machine transmission. This part helps to keep the motor and transmission working together properly. T...

Whirlpool GEAR-WORM (Part# WP240210-2) is a replacement part for Whirlpool washing machines. It is a gear and worm assembly that helps to drive the transmission in the washing machine. The gear and worm assembly consists of two parts: the gear and the worm. The gear is a metal wheel with teeth tha...

Whirlpool GEAR-WORM Part# WP240309-2 is a replacement part for Whirlpool washers. It is a gear and worm assembly that helps to drive the transmission in the washer. The gear and worm assembly is made up of two parts: the gear and the worm. The gear is a plastic wheel with teeth that meshes with th...

Whirlpool GEAR-WORM Part# WPW10112253 is a replacement part for Whirlpool washing machines. It is a gear and worm assembly that helps to drive the transmission in the washing machine. The gear and worm assembly consists of a metal gear with a plastic worm attached to it. The gear is connected to t...

The Whirlpool Governor Part# WPW10330804 is a part used in many Whirlpool washing machines. It is a motor speed control device that regulates the speed of the motor in the washing machine. The governor helps to ensure that the motor runs at a consistent speed, regardless of the load size or type o...

Whirlpool HOLDR-BRUS - Part# 4162546 is a replacement part for Whirlpool dishwashers. It is a plastic brush holder that holds the lower spray arm in place. The holder is designed to fit most Whirlpool dishwashers and is made of durable plastic. It has two mounting holes on the back and comes with ...

The Whirlpool Lever-Ltch Part# WP3184200 is a replacement part for Whirlpool washers. It is a lever latch that is used to secure the lid of the washer when it is closed. The lever latch is made of durable plastic and has two mounting holes for easy installation. It also includes a spring-loaded la...

Whirlpool LEVER-SPD - Part# WP9709276 is a replacement part for Whirlpool washing machines. It is a lever that is used to control the speed of the spin cycle. The lever is made of plastic and has two positions: high and low. When the lever is in the high position, the spin cycle will run at a high...

Whirlpool NUT - Part# WPW10131078 is a replacement part for Whirlpool washing machines. It is a plastic nut that is used to secure the agitator to the drive shaft. This part is made of durable plastic and is designed to last for many years. The nut measures approximately 1-1/4 inches in diameter a...

Whirlpool Pin-Dowel Part# WP16910 is a replacement part for Whirlpool appliances. It is a small metal pin with a plastic dowel attached to it. The pin is used to secure the door latch assembly to the door frame of the appliance. The plastic dowel helps keep the pin in place and prevents it from ra...

Whirlpool PLATE-CTRL - Part# WPW10119326 is a control plate for Whirlpool dishwashers. It is used to control the operation of the dishwasher, including the start/stop button, cycle selector knob, and other controls. The control plate is made of durable plastic and features a white finish. It is de...

Whirlpool SCREW - Part# WP9709194 is a replacement part for Whirlpool appliances. It is a screw that is used to secure the door handle to the door of the appliance. The screw measures 1/4 inch in diameter and is made of metal. It has a Phillips head and comes with two washers. This part is compati...

Whirlpool WHIP-WIRE is a part number WP9704329 that is used to connect the dishwasher to the water supply. It is a flexible stainless steel hose with a 1/2 inch female compression fitting on one end and a 3/8 inch male compression fitting on the other end. The hose is designed to be used with Whir...