Model: 5K45SS

Whirlpool Bearing - Part# 240308 is a replacement part for Whirlpool washing machines. It is a tub bearing that helps to reduce noise and vibration in the washer during the spin cycle. The bearing helps to support the inner tub of the washer and allows it to spin smoothly and quietly. This part is...

Whirlpool Bearing Part# WP16897 is a replacement part for Whirlpool washing machines. It is a high-quality bearing that helps to reduce noise and vibration during the spin cycle. The bearing is made of durable steel and is designed to last for many years. It is an OEM (Original Equipment Manufactu...

The Whirlpool BRKT BEARG Part# 3180526 is a bracket used to secure the bearing assembly in Whirlpool washing machines. This part is made of metal and is designed to fit specific models of Whirlpool washers. It attaches to the back of the washer cabinet and holds the bearing assembly in place. The ...

Whirlpool Brkt-Bearg Part# WP3180526 is a part used in Whirlpool washing machines. It is a bracket and bearing assembly that helps to support the agitator during the wash cycle. The bracket and bearing assembly helps to reduce noise and vibration during the wash cycle, as well as helping to keep t...

The Whirlpool CAP-BRUSH Part# WP3184212 is a replacement part for Whirlpool washing machines. It is a replacement agitator cap and brush kit that helps to keep the agitator clean and functioning properly. The kit includes the agitator cap, two brushes, and a retainer clip. The cap fits over the to...

Whirlpool CAP-HUB - Part# WP242765-2 is a part used in Whirlpool washing machines. It is a hub and cap assembly that helps to secure the agitator to the transmission shaft. The hub and cap are made of plastic and the hub has a metal insert for added strength. The part includes the hub, cap, and mo...

80 Whirlpool CAP-SPRING - Part# WP11628780 is a replacement part for Whirlpool washing machines. It is a metal spring that fits into the lid of the washing machine and helps to keep the lid closed during operation. The spring is made of stainless steel and is designed to last for many years. It hel...

The Whirlpool DRIP RING (Part# WP240285) is a replacement part for Whirlpool dishwashers. It is a plastic ring that fits around the outside of the dishwasher tub and helps to direct water away from the motor and other components. The ring also helps to keep water from splashing onto the floor or c...

The Whirlpool GASKET - Part# WP4162324 is a replacement part for Whirlpool dryers. It is a black rubber gasket that fits around the door opening of the dryer to create a seal. This helps to keep heat and moisture inside the dryer, which helps to improve its efficiency and performance. The gasket a...

Whirlpool HOLDR-BRUS - Part# 4162546 is a replacement part for Whirlpool dishwashers. It is a plastic brush holder that holds the lower spray arm in place. The holder is designed to fit most Whirlpool dishwashers and is made of durable plastic. It has two mounting holes on the back and comes with ...

The Whirlpool LEVER-LTCH - Part# WP24452 is a replacement part for a range of Whirlpool ovens. It is a lever latch that is used to secure the oven door in place. The part is made of metal and has two screws that attach it to the oven door. It has a black finish and measures approximately 3 inches ...

Whirlpool Pin-Dowel Part# WP16910 is a replacement part for Whirlpool appliances. It is a small metal pin with a plastic dowel attached to it. The pin is used to secure the door latch assembly to the door frame of the appliance. The plastic dowel helps keep the pin in place and prevents it from ra...

Whirlpool Pin-Groove Part# WP9705444 is a replacement part for Whirlpool washers. It is a pin-groove assembly that is used to secure the outer tub to the inner tub. The pin-groove assembly consists of two parts: the pin and the groove. The pin is inserted into the groove and then secured with a lo...

Whirlpool RING-RETNR - Part# WP9703438 is a replacement part for Whirlpool dishwashers. It is a plastic retainer ring that holds the spray arm in place. The spray arm is the part of the dishwasher that sprays water onto the dishes during the wash cycle. The retainer ring helps to keep the spray ar...

Whirlpool SEAL - Part# 240775-1 is a replacement part for Whirlpool washers. It is a rubber seal that fits around the inner tub of the washer and helps to keep water from leaking out. The seal is made of durable rubber and is designed to last for many years. It is an important part of the washer, ...

Whirlpool SEAL - Part# WP240775-1 is a replacement part for Whirlpool washing machines. It is a rubber seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the machine. The seal is made of durable rubber and has an inner diameter of 24 inches and an ou...

Whirlpool WHIP-WIRE is a part number WP9704329 that is used to connect the dishwasher to the water supply. It is a flexible stainless steel hose with a 1/2 inch female compression fitting on one end and a 3/8 inch male compression fitting on the other end. The hose is designed to be used with Whir...