Model: 38489KBSMRSS

GE BLADE COND FAN ASM - Part# WR60X10207 is a replacement part for a refrigerator condenser fan motor assembly. This part is used to circulate air through the condenser coils of the refrigerator, which helps to keep the refrigerator cool. The fan motor assembly includes a fan blade, motor, and mou...

GE Clip Grille Bisque (Part# WR02X10738) is a replacement part for GE refrigerators. It is a plastic grille that is used to cover the air vent on the refrigerator. The grille helps to keep dust and debris from entering the refrigerator and also helps to keep the air circulating properly. The grill...

GE Control Temp Part# WR09X10110 is a temperature control thermostat for refrigerators. It is designed to regulate the temperature inside the refrigerator by controlling the compressor and fan motor. The thermostat has a dial that can be adjusted to set the desired temperature. It also has a reset...

The GE CORD POWER ASSY - Part# WR23X10300 is a power cord assembly for a variety of GE appliances. It is a three-wire cord with a plug on one end and two terminals on the other end. The plug is designed to fit into a standard 120V wall outlet, while the two terminals are designed to connect to the...

GE Door Dairy C - Part# WR22X10024 is a replacement part for GE refrigerators. It is a dairy door bin that fits in the refrigerator door and provides storage for dairy items such as butter, cheese, and yogurt. The part number WR22X10024 is specific to certain models of GE refrigerators. This part ...

GE GASKET DOOR FF - Part# WR24X10184 is a replacement part for General Electric (GE) refrigerators. It is a gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and has a magnetic strip along the edge to ensure a tight seal. This...

The GE GASKET DOOR FZ - Part# WR24X10185 is a replacement part for a refrigerator. It is a flexible gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of a durable rubber material and is designed to fit around the door frame of the refrigerator....

GE GASKET HOOD - Part# WR14X10077 is a replacement part for a range hood. It is a rubber gasket that fits around the edge of the range hood to create an airtight seal between the hood and the wall. The gasket helps to prevent air from escaping through gaps in the installation, which can reduce ene...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Condenser Fan Motor - Part# WR60X10170 is a replacement part for refrigerators. It is designed to circulate air around the condenser coils in order to keep them cool and operating efficiently. The motor is made of durable plastic and m...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Defrost Heater - Part# WR51X10038 is a replacement part for refrigerators. It is used to help keep the refrigerator running efficiently by preventing frost buildup on the evaporator coils. The defrost heater works by heating up the eva...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Defrost Terminator Thermostat - Part# WR50X10025 is a thermostat that is used to control the temperature of the refrigerator. It is designed to turn off the defrost cycle when the desired temperature has been reached. The thermostat mo...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Blade - Part# WR60X10205 is a replacement part for refrigerators. It is a fan blade that is used to circulate air within the refrigerator. The fan blade helps to ensure that the temperature inside the refrigerator remain...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Motor - Part# WR60X10172 is a replacement part for refrigerators. It is used to circulate air around the evaporator coils in the refrigerator, which helps to keep the refrigerator cool. The motor is designed to be durabl...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator FASTENER SCREW HANDLE SS - Part# WR02X12028 is a stainless steel screw handle that is used to secure the refrigerator door handle to the refrigerator door. This part is designed to fit most GE, Hotpoint, PartsIPS, and Kenmore refrigera...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Hinge Washer - Part# WR01X10146 is a replacement part for refrigerators. It is used to secure the door hinge to the refrigerator cabinet. The washer is made of plastic and has a diameter of 1-1/4 inches. It has a hole in the center tha...

GE GROMMET EVAP (Part# WR02X10098) is a replacement part for refrigerators. It is a grommet that is used to seal the evaporator fan motor in the refrigerator. The grommet helps to keep the motor secure and prevents it from rattling or vibrating. It also helps to keep moisture and dust out of the m...

The GE Grommet Water Fill Assy - Part# WR02X10804 is a replacement part for a refrigerator. It is a rubber grommet that is used to fill the water reservoir in the refrigerator. The grommet is designed to fit into the hole in the back of the refrigerator and allow water to flow from the water line ...

GE Humidity Slide Rh - Part# WR17X11986 is a replacement part for a GE refrigerator. It is a humidity slide that controls the amount of moisture in the refrigerator. The slide is located on the inside of the refrigerator and can be adjusted to allow more or less moisture into the refrigerator. The...

GE Nozzle Control Foam - Part# WR02X10723 is a foam sealant used to fill gaps and cracks in refrigerators. It is designed to prevent air and moisture from entering the refrigerator, which can cause damage to the appliance. The foam is applied around the edges of the refrigerator door, as well as a...

GE Overload Part# WR08X10015 is a thermal overload relay designed to protect motors from damage due to excessive current draw. It is designed to detect when the current draw of a motor exceeds its rated capacity and shut off the power supply to the motor before it can be damaged. The overload rela...

GE PAN SNACK Part# WR32X10248 is a replacement part for GE refrigerators. It is a wire shelf that fits into the refrigerator door and provides additional storage space for snacks and other items. The shelf is made of durable metal and plastic materials, and it measures approximately 17 inches wide...

GE RELAY PTCR - Part# WR07X10055 is a relay used in refrigerators and other appliances to control the compressor motor. It is a normally open relay that is activated when the temperature inside the refrigerator reaches a certain level. The relay then closes, allowing current to flow through the co...

GE Ring Compression - Part# WR02X12149 is a part used in refrigerators and freezers to create a seal between the evaporator and the condenser. It is made of rubber and is designed to provide a tight seal that prevents air from leaking out of the refrigerator or freezer. The ring compression helps ...

GE SCR 10-16 AB PL FLP 3/4 - Part# WR01X10483 is a 3/4 inch, 10-16 Amp, single pole, flip switch from General Electric. It is a part of the SCR series of switches and is designed for use in residential and commercial applications. The switch has a black plastic body with a white toggle switch and ...

A GE set screw, part# WR01X10450, is a type of fastener used to secure two or more objects together. It is a threaded fastener that is inserted into a pre-drilled hole and tightened with a wrench or screwdriver. The set screw has a flat head and is made of steel for strength and durability. It is ...

GE SHELF ASM FRZ. Part# WR71X10522 is a replacement shelf assembly for GE refrigerators. It is designed to fit in the freezer section of select GE models and is made of durable plastic material. The shelf assembly includes two adjustable shelves, one fixed shelf, and four door bins. It also featur...

GE SHELF CANT GLS - Part# WR32X10540 is a replacement shelf for GE refrigerators. It is made of glass and is designed to fit into the cantilever shelf system of GE refrigerators. The shelf measures 32 inches wide by 10.5 inches deep and has a white finish. It is designed to hold up to 25 pounds of...

GE Slide Snack is a refrigerator drawer system designed to make food storage and organization easier. The system consists of two drawers that slide out from the refrigerator door, allowing for easy access to items stored in the back of the fridge. The drawers are adjustable and can be used to stor...

GE SLIDE SNACK PAN - Part# WR72X10086 is a replacement part for GE refrigerators. It is a slide-out tray that fits into the bottom of the refrigerator and is used to store snacks and other items. The tray slides out from the bottom of the refrigerator, allowing easy access to stored items. The tra...

GE STOP DOOR FF - Part# WR02X10740 is a part used in some GE refrigerator models. It is a door stop that helps to keep the refrigerator door from swinging open too far and hitting the wall or other objects. The part is made of plastic and has two mounting holes for easy installation. It also has a...